• Journal of computational fluids engineering
• /
• v.17 no.2
• /
• pp.107-112
• /
• 2012

We explored the dynamic motions and the lateral equilibrium positions of an elastic capsule in channel flow at moderate Reynolds number varying Re, aspect ratio, size ratio, membrane stretching and bending coefficient. The transition of tank-treading/swinging to tumbling motion was observed in the simulations and the transition of dynamic motions for capsules resulted in different trend of the variation in the lateral equilibrium positions. Though other conditions were similar, the capsule with tumbling motion migrated closer to the wall than that with tank-treading motion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.521-526
• /
• 2004

The fragrant fabrics are prepared by the attaching microcapsules using acrylic binder. To improve the handle of fragrant fabrics, pretreatment by softener is suggested. The durability of fragrant fabrics and the change of their handle are investigated. It is carried out One-way ANOVA and Duncan test to determine bending properties, shear properties, surface properties of untreated, SO-MC and BI-MC by Kawabata system. BI-MC shows significant differences in B and 2HB. SO-MC shows significant differences in G and 2HG. It turned out the pretreatment by softener mitigated the effect of binder and makes fabrics softer than untreated fabrics.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.504-507
• /
• 2011

The inertial migration of a two-dimensional elastic capsule in a channel flow was studied over the Reynolds number range $1{\leq}Re{\leq}100$. The lateral migration velocity, slip velocity, and the deformation and inclination angle of the capsule were investigated by varying the lateral position, Reynolds number, capsule-to-channel size ratio(${\lambda}$), membrane stretching coefficient(${\Phi}$), and membrane bending coefficient(${\gamma}$). During the initial transient motion, the lateral migration velocity increased with increasing Re and ${\lambda}$ but decreased with increases in ${\Phi}$, ${\gamma}$ and the lateral distance from the wall. The initial behavior of the capsule was influenced by variation in the initial lateral position ($y_0$), but the equilibrium position of the capsule was not affected by such variation. The balance between the wall effect and the shear gradient effect determined the equilibrium position. As Re increased, the equilibrium position initially shifted closer to the wall and then moved towards the channel center. A peak in the equilibrium position was observed near Re=30 for ${\gamma}=0.1$, and the peak shifted to higher Re as ${\gamma}$ increased. Depending on the lateral migration velocity, the equilibrium position moved toward the centerline for larger ${\gamma}$ but moved toward the wall for larger ${\Phi}$ and ${\gamma}$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.279-280
• /
• 2007

• The KIPS Transactions:PartC
• /
• v.8C no.3
• /
• pp.235-244
• /
• 2001

급속산 암호의 민간 부문 확산에 따라 암소 사용으로 인한 부작용을 방지하기 위한 대책으로 키 복구에 대한 연구가 활발히 진행되고 있다. 그러나 지금까지 제시된 기존의 키 복구 기술들은 그 대부분이 정부의 법 집행권 보장에만 설계초점을 맞추고 있기 때문에 다양한 사용자들의 요구를 충족시키기 어렵다. 본 논문에서는 키 복구 시스템에 대한 사용주체들의 입장을 고려하여 다양한 환경에서 사용할 수 있는 키 복구 시스템을 제안한다. 제안하는 방식은 암호통신 과정 중에 키가 분배되는 일방향 키 분배가 가능하고 기존의 시스템만큼 효율적이며, 충분한 유연성을 제공한다.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.574-581
• /
• 2012

The relatively short lifetime is a major obstruction for the commercial applications of OLED. One of the reason for the short lifetime is that the organic materials are interacted with water or oxygen in the atmosphere. Protection of water or oxygen from diffusing into the organic material layers are necessary to increase the lifetime of OLED. Although encapsulation of OLED with glass or metal cans has been established, passivation methods of OLED by organic/inorganic thin films are still being developed. In this paper we have developed in-situ passivation system and thin film passivation method using PECVD by which deposition can be performed at room temperature. We have analyzed the characteristics of the passivated OLED device also. The WVTR (Water Vapor Transmission Rate) for the inorganic thin film mono-layer can be reached down to $1{\times}10^{-2}g/m^2{\cdot}day$ and improved lifetime can be obtained. Thin film passivation methods are expected to be applied to flexible display.

• Journal of KIISE:Software and Applications
• /
• v.27 no.11
• /
• pp.1088-1098
• /
• 2000

제어 루프는 입력 값들만으로써는 정확한 출력 값들을 계산하기 어렵거나 불가능한 물리적 공정들을 제어하는 공정 제어 시스템에 핵심적인 구성 요소이다. 본 논문에서는 실시간 공정 제어 응용 시스템의 효율적인 개발을 지원하기 위하여 공정 제어 루프 프레인웍을 포인트 클래스를 기본 단위로하여 제어 루프의 공정 변수들과 제어 알고리즘을 캡슐화 함으로써 다양한 구조와 행위를 갖는 공정 제어 응용 시스템으로 쉽게 개조, 확장이 가능하도록 설계되었다. 공정 변수들에 대한 연속적인 재계산을 수행하는 포인트 객체들의 상호 작용을 통하여 요구된 공정의 감시 제어 기능을 유연하게(flexible) 구현할 수 있는 사건/시간 구동적인(event/time-triggered) 포인트 클래스의 설계 패턴이 본 논문의 핵심이다. 본 제어 루프 프레임웍의 설계에는 Observer, Composite, Strategy, Proxy 등과 같은 객체 지향 패턴들이 사용되었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.626-628
• /
• 1999

제어 루트는 입력값들 만으로써 정확한 출력값들을 계산하기 어렵거나 불가능한 물리적 공정들을 제어하는 공정 제어 시스템에 핵심적인 구성 요소이다. 본 논문에서는 실시간 공정 제어 응용 시스템의 효율적인 개발을 지원하기 위하여 공정 제어 루프 소프트웨어를 재사용성이 높은 객체지향 프레임웍으로 설계, 구현한 사례를 기술한다. 본 논문의 제어 로프 프레임웍은 포인트 클래스를 기본 단위로 제어 루프의 공정 변수들과 제어 알고리즘을 캡슐화하여 다양한 구조와 행위를 갖는 공정 제어 응용 시스템으로 쉽게 개조, 확장이 가능하도록 설계되었다. 본 논문의 핵심은 공정 변수들에 대한 연속적인 재계산을 수행하는 포인트 객체들의 상호 작용을 통하여 요구된 공정의 감시 제어 기능을 유연하게 구현할 수 있는 사건/시간 구동적인(event/time-triggered) 포인트 클래스의 설계 패턴이다. 본 제어 루프 프레임웍의 설계에는 Observer, Composite, Strategy, Proxy 등과 같은 객체 지향 패턴들이 사용되었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.21-27
• /
• 2022

Flexible pressure sensor was developed using low-cost conductive graphite as printed electronics. Flexible pressure sensors are attracting attention as materials to be used in future industries such as medical, games, and AI. As a result of evaluating various electromechanical properties of the printed electrode for flexible pressure sensors, it showed a constant resistance change rate in a maximum tensile rate of 20%, 30° tension/bending, and a simple pulse test. A more appropriate matrix pattern was designed by simulating the electrodes for which this verification was completed. Utilizing the Serpentine pattern, we utilized a process that allows simultaneous fabrication and encapsulation of the matrix pattern. One side of the printed graphite electrode was O₂ plasma surface treated to increase adhesive strength, rotated 90 times, and two electrodes were made into one through a lamination process. As a result of pasting the matrix pattern prepared in this way to the wrist pulse position of the human body and proceeding with the actual measurement, a constant rate of resistance change was shown regardless of gender.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.38-44
• /
• 2001

The integration of concurrency and object-oriented programming paradigm has been a goal of researchers for over a decade. The concurrent object-oriented programming languages used for various concurrent applications development. However, concurrency and inheritance have conflicting characteristics, thereby inhibiting their simultaneous use without heavy breakage of encapsulation. This conflicting phenomenon is known as inheritance anomalies, have been limited in applicability and have not addressed all the issues that synchronization raises. In this paper, the behavior description equation is introduced for the solution for the conflicting phenomenon, between inheritance and object-based concurrency. As a result, it can solve the several inheritance anomalies and is not necessary to redefine method. Therefor, it offers flexible concurrency model with an emphasis on the reuse of both synchronization and function code.