• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.5
• /
• pp.22-33
• /
• 2000

Since the heavy-duty power manipulator generally has high ratio gear reducers at its joints, its dynamic characteristics is much slower than that of the master manipulator and it is likely to encounter the saturation in the input magnitude when it is used as the slave manipulator in telemanipulation systems. This paper proposes a force reflecting and compliant control scheme for the heavy-duty power telemanipulator. The main advantage of the proposed scheme is that it provides a precise position and compliant control performance for a telemanipulator with control input saturation. The stability of the proposed scheme is analyzed and a series of experiments shows its performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1587-1600
• /
• 1991

본 연구에서는 로봇조작기를 강체부와 유연한 외팔보로 이루어진 모델로 설정 한 후 확장된 Hamilton의 원리를 적용하여 제어계의 운동방정식을 유도하였다. 계를 유한개의 제어 모드와 잔류 모드로 구분하고, 제어 모드에 대해 최적제어를 수행하기 위해 관측기를 설계하였으며, 진동에 관련된 측정 불가능한 상태변수를 추정하였다. 분석과 검토는 서보모터가 모든 제어를 담당하는 방식과 서보모터의 제어 방식에 작동 기를 추가시켜 병행 제어하는 다입출력 방식으로 구별하여 수행하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.169-175
• /
• 2005

In this paper, a novel vibration control scheme for a single-link flexible manipulator system without using a vibration feedback sensor is proposed. In order to achieve the vibration information of the flexible link, a reaction moment estimator based on the dynamic characteristics of the flexible manipulator is proposed. While the manipulator is maneuvering the reaction moment is reciprocally acting on the flexible link and the hub inertia due to the vibration of the link. A sliding mode controller based on the equivalent rigid body dynamics corresponding to the proposed flexible manipulator is then augmented with the reaction moment estimator to realize a decentralized control system. The reaction moment estimator is implemented via the first order low pass filter. The performance of the proposed control scheme is verified by computer simulation and experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2015-2025
• /
• 1991

A long and light-weight forearm of the vertical 2 DOF robot manipulator with a heavy payload driven by parallel drive mechanism is modelled as a Euler-Bernoulli beam with a tip mass subjected to a high speed rotation. Governing equation is obtained by Hamilton's principle and represented as state variable form using the perturbed variables which describe the perturbed errors at the manipulator's final configuration. Digitial optimal control and observer theory are used to suppress the forearm vibration and control the positions of the joint angles with measured/estimated state feedback. Computer simulations and experimental results are obtained and compared each other.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1307-1313
• /
• 1992

The end-point position control of a flexible manipulator is a non-minimum phase system. The PD feedback of the end-point position is not stable in contrast with that of the hub jangle. However, the system can be stabilized conditionally by the feedback of both the hub rate angle and the end-point position. Even in the non-minimum system, the LQG/LTR control law is more systmatic controller design method than the classical control law which uses a root-locus technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1700-1703
• /
• 1997

The flexibility of the manipulator inevitably inducess the vibration at the end effector. For the increase in speed and accuracy at the end tip, in this work, position and vibration control of a flexible manipuator with a separate voice coil type actrator for vibration suppression, is studied. The flexible manipulator with a tip mass is modeled an Euler-Bernoulli beam. An H.inf. controller is designed in order to make the controlled system robust against unmodeled higher-order mode vibration of the manipulator, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is valid and that robust vibration control of the flexible manipulator is efficiently achieved.

• 프린팅코리아
• /
• s.38
• /
• pp.131-135
• /
• 2005

인쇄업체와 제조업체가 양면인쇄에 대해 논의할 때는 효율성과 유연성과 같은 단어들이 항상 따라 나온다. 단면 인쇄기와 달리, 양면 인쇄기는 양면인쇄에 한번의 작업준비만 필요하며 사실상 수동으로 하는 용지 조작 및 건조 시간 등을 절감한다. 이와 함께 양면인쇄기는 인쇄업체들이 새로운 응용시스템을 추구할 수 있도록 하며 얼룩발생과 같은 문제점들도 철저히 줄이는 방향으로 발전하고 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.163-169
• /
• 1993

A flexible manipulator can move in the high speed even with the small driving torque. The dymanic equations of flexible manipulator which include 2 vibrational modes are derived using the clamped-free boundary condition. Simulation results of the 6th order model are well matched with experimental results. The hub angle of the flexible mainpulator can be controlled without vibration of the beam by the feedback of both hub angle and strain. The overshoot of the hub angle in the step response is reduced without sacrificing the rise time using the cycloidal function instead of the step function as the referenmce input.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.73-76
• /
• 2004

자동 부하 전환 개폐기는 일반적으로 주 전원의 전압 상태를 감시하여 주 전원의 정전이나, 저 전압 이 감지 될 때 주 전원을 개방시키고, 예비 전원으로 신속하게 전환 시킬 수 있는 구동 메커니즘이 필요하며, 주 전원이 정상 상태로 복구되면 다시 예비 전원에서 주 전원으로의 신속한 전환이 요구 되어진다. 본 논문에서 연구되는 자동 부하 전환 개폐기의 구동부는 1개의 구동력으로 2개 선로의 스위치를 동시에 조작하게 할 수 있는 링크 구조와 동작 원리를 간지고 있으며, 이 동작을 안정적이고 신뢰도 높게 조작하기 위해서 개폐기 구동부의 동특성을 구현할 수 있는 동적 모델로 검증하여 재작하였다. 보다 정확한 모델 수립을 위하여 기구 동작 시에 발생하는 부품들 사이의 충돌, 마찰, 유연성 등의 많은 동적특성들을 정밀하게 모사 할 수 있는 유연 다물체 동역학을 적용하였으며, 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3186-3198
• /
• 1996

When a robot is to have contact with its enviornment, such as a medi-care robot, it would be advantageous for the robot to have a high compliance. For this reason, a robot having not only a flexible link but also an actuator with compliance, is desirable. This paper is concerned with the position and vibration control of 1 degree of freedom flexible robot using a pneumatic artificial muscle actuator. The dynamics of the manipulator assumed to be and Euler-Bernoulli beam are derived on the basis of the linear mathematical modle. Although this pneumatic artifical muscle actuator has many merits for the compliance robot, it is difficult to make an effective control scheme of this system because of ths nonlinearity and uncertainty on the dynamics of the actuator. By designing a controller using .mu.-synthesis, robust performance against measurement noise, various modeling uncertainties on the dynamics of the servo valve, actuator and mainpulator, is achieved. The effectiveness of the proposed control method is illustrated through simulations and experiments.