• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.30-33
• /
• 1991

The natural frequency of an one-link flexible robot manipulator may be varied due to many kinds of causes and this natural frequency is regarded as the uncertain element. Utilizing measured state the robust controller is designed for bounding every system response within a certain neighborhood of the zero state.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.200-205
• /
• 1989

The performance of conventional robot arms is inhibited by trade-off between speed and accuracy. Because these systems measure only joint angles, in spite of slow speed, they must rely on a stiff structure in order to attain positioning accuracy. Lightweight links would allow faster motion, but their flexibility would also produce positioning errors. This research is involved with the development and evaluation of an End-point Control System whose major goal is to compensate for link deflections and thus mitigate the speed versus accuracy conflict in conventional manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.1
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.155-163
• /
• 1989

For a one link flexible arm control, quadratic optimal control is applied to the dynamic modilling which is derived from an assumed mode method. For the quadratic optimal control technique, the full state feedback must be obtained for closing the control loop, but because some of the states in the flexible system(e.g. the rate of change of the time dependent variables of the mode shapes) can not be directly measured, state estimator is necessary to achieve the practical implementation of the optimal controller. When disturbances and measurement noise occur, stochastic approach must be applied to estimating the states of the system. Kalman Filter is used as a stste estimator. Through the simulation, the flexible system with state estimator is compared with the flexible system assuming that all the states can be measured.

• Electronics and Telecommunications Trends
• /
• v.6 no.2
• /
• pp.3-14
• /
• 1991

최근의 생산자동화 분야에는 제품의 다양화, 라이프사이클의 단기화 등의 요구에 대응하기 위하여 유연성, 확장성, 보수성이 높은 공정 적용시스팀의 실현요구가 높아지고 있다. 이 요구에 대응하기 위하여 조립, 검사 등의 공정라인에서는 프로그램이 가능한 PLC, 로보트 등의 단위제어기기를 조합하여 작업스테이션을 구성하고 이들을 반송차 등으로 연결하여 운영하는 사례가 늘어나고 있다. 이러한 자동화의 실현을 가능하게 하기 위하여 대상공정의 단위 제어기기에 따라 라인 운용의 변경 등에 유연하게 대응하고 또한 재기동 조정, 이상처리 등의 지원기능을 보유하기 위한 공정구축의 해석과 제어시스팀의 운용기법이 연구되고 있다. 본고에서는 이러한 생산라인에서의 단위제어기기의 새로운 요구와 공정의 해석을 위하여 C-net와 Grafcet기법과 이의 활용사례를 소개한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.107-116
• /
• 1993

In the design and operation of robitic arm with flexible links, the equation of motion are required to exactly model the interaction between rigid body motion and elastic motion and to be formulated efficientlyl. In this paper, the flexible link is represented by applying the D-H rigid link representation method to measure the elestic deformation. And the equations of motion of robotic arm, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated from the principle of virtual power. Dynamic characteristics due to elastic deformation of each link are obtained by using F. E. M to model complex shaped link acurately and by eliminating elastic modes of higher order that do not largely affect motion to reduce the number of elastic degrees of freedom. Also presented is the result of simulation of flexible robotic arms whose joints are controlled by direct or PD control.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.36-44
• /
• 1993

In the development of a high speed and light weight manipulator, it is necessary to consider the flexibility of a robotic arm. The infinite dynamics must be analyzed to obtain the finite mode modeling to achieve the feasible controller design of the robotic arm. The modeling procedures of the flexible robot arm, and natural frequencies and mode shapes by the constrained and unconstrained mode method are illustrated. The transfer function of the robot arm with a payload is also shown. The controller is designed by the pole assignment and optimal control theory to compensate for the unmodelled dynamic effects to the low order system. Also, the pole assignment method involving the harmonic vibration mode is presented through computer simulation.

• 전기의세계
• /
• v.34 no.8
• /
• pp.489-496
• /
• 1985

VLSI기술의 독특한 특징들은 이에 맞는 VLSI 지향적 아키텍쳐를 요구하게 된다. 이러한 아키텍쳐들은 영상신호 처리에 있어 중요한 실시간 처리를 위한 병렬처리 및 pipeline처리에도 잘 조화되어 고속영상신호 처리를 위한 시스템에서 VLSI기술이 필수적으로 사용 되어야 함을 알 수 있다. 현재 고속 영상신호 처리를 위한 VLSI 구조로 화면의 병렬성에 근거를 둔 CLA(Cellular Logic Array) 및 이의 단점을 보완한 피라밋 구조가 활말히 연구되고 있으나 거대한 양의 하드웨어 및 주변 시스템의 요구로 그 규모가 방대하여 지는 흠이 있다. 이에 반하여 화소 Kernel의 병렬성에 근거를 두는 pixel-kernel 프로세서는 영상신호 데이타의 공간의존성의 기본 단위인 Kernel을 병렬처리하고 그 거대성 및 균일성은 Pipeline 처리를 함으로써 비교적 작은 하드웨어로 높은 성능을 얻을수 있다. 또한 기존 영상 Sensor 로부터의 데이타 흐름을 중단 시키지 않고 처리할 수 있으며 기본 프로세서의 다양한 조합 방법에 의해 시스템 구조상의 유연성을 갖는다. 따라서 로보트 등의 실제적인 응용분야에서 후자의 구조가 효율적으로 사용될 것으로 전망된다. 앞으로 효과적인 pixel-Kernel 프로세서의 개발을 위해 PKF 계산구조의 연구와 함께 효과적인 Kernel 병렬성을 실현할 수 있는 VLSI 지향적 구조의 개발이 요구된다.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.394-396
• /
• 1992

This note is concerned with the point to point control of manipulators having elastic joints. We present a PD control algorithm which is adaptive with respect to the gravity and elastic parameters of robot manipulators. While the conventional control law is used, a new adaptive law is used to improve the performance. The proposed controller is shown to be stable. It is Shown that steady-state position error converges to zero through some simulations concerning the manipulator with three revolute elastic joints.