• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1462-1469
• /
• 1997

This study presents a genetic algorithm-based method for optimizing control parameters in fluid power systems. Genetic algorithms are general-purpose optimization methods based on natural evolution and genetics. A genetic algorithm seeks control parameters maximizing a measure that evaluates system performance. Five control gains of the PID-PD cascade controller fr an electrohydraulic speed control system with a variable displacement hydraulic motor are optimized using a genetic algorithm in the experiment. Optimized gains are confirmed by inspecting the fitness distribution which represents system performance in gain spaces. It is shown that optimization of the five gains by manual tuning should be a task of great difficulty and that a genetic algorithm is an efficient scheme giving economy of time and in labor in optimizing control parameters of fluid power systems.

• 유공압시스템학회논문집
• /
• 제7권3호
• /
• pp.1-6
• /
• 2010

This paper deals with the issue of simple adaptive position control for a pump-controlled cylinder system. A fixed displacement pump is utilized instead of servo valve and its speed is controlled by AC motor. The whole control system is composed of a pair of interconnected subsystems, that is, a feedback control system and a feedforward control system. From experiments it is shown that position control using simple adaptive control can accomplish significant reduction in position tracking error comparing to a conventional PID control.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.73-80
• /
• 2015

Apollo Mission이 종료된지 거의 반세기가 지났지만, 지금도 Saturn V 발사체의 기술의 복원과 개량을 위한 연구가 활발하게 진행되고 있다. 본 연구에서는 Saturn V 발사체의 1단 로켓(S-IC)의 개발 과정과 엔진 퍼지, 포고현상 억제 방법, 연료탱크 가압 방식, 유압 및 공압 시스템의 운용 방식 등에 대한 특징들에 대해 조사하였다. S-IC의 추진기관 시스템의 특징에 대한 이해는 발사체 시스템의 이해를 도울 수 있고, 향후 발사체 개발 시에 시간, 비용 등의 절감 효과를 가져다 줄 수 있는 유용한 참고 자료가 될 것이라 예상된다.

• 대한기계학회논문집A
• /
• 제41권7호
• /
• pp.683-689
• /
• 2017

고유가, 환경규제 등의 국제무역환경 변화에 따라 수출주력상품인 유압 브레이커의 고부가가치화를 위하여 지능형 전자제어유압시스템 분야인 ICT 융합기술을 활용하여 암반특성을 예측하고 최적모드(다단형)로 구동하는 지능형 파쇄기술 및 에너지 효율을 극대화할 수 있는 유압 브레이커 개발에 관한 연구를 수행하였다. 본 연구에서는 암반의 강도에 따라 최적의 타격력을 제공하기 위해 근접센서를 이용해 암반 타격 시 피스톤의 하강 깊이를 측정하고 이를 통해 암반의 특성을 판별하여 타격력을 결정하는 피스톤 스트로크의 길이를 솔레노이드 밸브를 이용해 제어하였다. 다단 타격시스템을 위해 컨트롤러와 디스플레이/조작장치를 개발하였고, 무선통신을 이용하여 상호 정보교환이 가능하도록 하였다. 최종적으로 암반 강도에 따라 3단으로 타격할 수 있는 제어시스템을 개발하였고, 실차실험을 통해 이를 검증하였다.

• 유공압시스템학회논문집
• /
• 제4권1호
• /
• pp.1-6
• /
• 2007

The typical hydraulic system of hoist is composed of a hydraulic supply unit, a directional control valve, two pilot operated check valves, two flow control valves. The capacity coefficients of flow control valves should be adjusted for the hoist to operate at moderate speed and minimize the hydraulic energy loss. However, it is difficult to adjust the four capacity coefficients of flow control valves by trial and error for optimal operation. The steady state model of the hoist hydraulic system is derived and the optimal capacity coefficients of flow control valves are obtained using the complex method that is one kind of constrained direct search method.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.729-735
• /
• 2012

A LQG/LTR(linear quadratic Gaussian/loop transfer recovery) controller with an integrator is designed to control the electro-hydraulic positioning system. Without considering the nonlinearity in the dead-zone, computer simulations are performed and show good performances and tracking abilities with the feedback controller based on the linear system model. However, the performance of the closed loop hydraulic positioning system shows big steady-state error in real system because of the dead-zone. In this paper, the feedback controller with a nonlinear compensator is introduced to overcome the dead-zone phenomenon in hydraulic systems. The inverse dead-zone as a nonlinear compensator is used to cancel out the dead-zone phenomenon. Experimental tests are performed to verify the performance of the controller.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.1-7
• /
• 2011

An inverted pendulum mounted on a cart and actuated by a hydraulic servo cylinder was designed and built. Position information of the cart was acquired via a potentiometer and a angle of the pendulum was sensed by an incremental encoder. These were collected by a DAQ board and processed through the Real-Time Windows Target software(included in simulink). A simulink graphical program was implemented as a controller of the hydraulic system that governed the motion of the cart in order to maintain vertical balance of the inverted pendulum. The purpose of this study is to develop an electro-hydraulic inverted pendulum system for a modeling and controling the intrinsic unstable system. The simulation results were compared with the experimental and verified.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.23-28
• /
• 2011

This paper investigates the motion control of a hydraulic motor-load system using the Simple Adaptive Control (SAC) method. The plant transfer function has been modelled mathematically. The open-loop responses have been obtained experimentally in order to identify the design parameters of transfer function. The hydraulic motor-load system has been modelled using the 3D CAD and imbedded in the hydraulic circuit simulation program to verify the overall performance. The experimental results confirm that the SAC method gives a good tracking performance compared to the PID control.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.130-135
• /
• 1998

This paper deals with a position control problem of a hydraulic proportional position control system using a friction compensation control. There are many nonlinearities in hydraulic systems. With only proportional controller, response is slow and steady-state error cannot be compensated properly. Controller designed in this paper achieves fast transient response through the velocity and acceleration feedback and good steady-state response through the friction compensator. A/D and D/A board is employed for data acquisition and manipulation. The experimental results are compared with computer simulation results using Matlab.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.781-788
• /
• 1987

본 연구에서는 제어대상으로 설정된 유압서어보 시스템은 비선형 시스템이므 로, 실제로 측정한 상태변수와 관측기에서 추정한 상태변수를 비교하여 이들이 서로 일치하는 것을 보임으로써 관측기에서 추정한 다른 상태변수들에 대한 신뢰도를 높일 수 있다. 따라서 본논문에서는 전차수 관측기를 사용한 경우에 대하여 고찰한다.