• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.357-357
• /
• 2011

그래핀은 육각형 구조로 이어진 탄소원자가 단일층을 형성한 현존하는 가장 얇은 나노물질로서, 면상에서의 우수한 전기적 열적 전도도와 화학적 안정성 등으로 많은 주목을 받고 있다. 이러한 그래핀의 우수한 특성들은 뛰어난 기계적 특성 및 높은 광 투과성과 맞물려 향후 플렉서블 투명전도막 등으로의 응용이 기대되고 있는 상태이다. 이러한 그래핀을 얻는 방법에는 물리 화학적 박리법, 산화규소의 흑연화, 열화학기상증착법(CVD) 등 많은 방법들이 존재하는데, 이중 CVD방법이 대면적으로 두께 균일도가 높은 그래핀을 얻는데 가장 적합한 방법으로 알려져 있다. 본 연구에서는 CVD방법을 이용하여 합성한 그래핀을 투명글래스 위에 전사하는 공정을 통하여 김서림방지(antifogging) 필름을 제작하였고, 그 면 발열특성에 대하여 조사하였다. 메탄가스를 원료가스로 합성한 그래핀 투명막은 가시광 영역에서 80% 이상의 투광도와 500~600 ${\Omega}/sq$ 정도의 면저항을 나타내었다. 또한 금 나노입자 또는 플라즈마 도핑 등의 후처리 공정을 통하여 면 발열특성의 향상을 도모하였으나 합성상태의 그래핀을 이용하는 것이 가장 우수한 면발열특성을 나타낸 것으로 확인하였다. 본 연구결과는 겨울철 자동차 유리표면의 성에 제거 등의 응용에 유용할 것으로 기대된다.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.151-155
• /
• 1998

Electrochemical behaviours on 1.0 mM methylviologen ($MV^{2+}$) in 100 mM NaCl+27 mM $MgCl_2$ solution, without and with sodium dodecyl sulfate (SDS), were studied. The intersection of two lines on ${\Delta}E_p$ (the difference between the anodic, $E_{pa}$, and the cathodic, $E_{pc}$, peak potentials) of the first and second redox waves vs. -log[SDS] plot was determined as a critical micelle concentration (CMC). When $Mg^{2+}$ was added, the effective access of $MV{\cdot}^+$ to the glassy carbon electrode surface became possible and the formation of micelles was retarded.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.36-41
• /
• 2011

This study proposes a experimental method to evaluate bonding strength of FRPs used for retrofitting concrete structures. Specimens are designed so that debonding failure of FRPs can be induced from reinforced concrete beams retrofitted with two layers of carbon and glass FRPs. And three-point loading tests are performed to see if debonding failure with proper debonding strength is observed from the specimens. The test results show that the tested beams are failed due to debonding of FRPs, therefore, the proposed test method is capable of evaluating debonding strength of FRPs using relatively small normal strength concrete beams.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.432-437
• /
• 2005

An electric swing adsorption (ESA) process for recovering highly pure $CO_2$ from the mixed gases was tested. In this study, activated carbon fibers were used as an adsorbent. The activated carbon fibers showed fast adsorption rate and the high adsorption capacity for $CO_2$ adsorption under the condition of the ambient pressure. Activated carbon fiber with higher specific surface area was suitable to repeated adsorption-desorption cycle process, showing consistent breakthrough curve. Especially, the regeneration method by vacuum combined with ESA improved the performance of desorption process by an additional 17％ regeneration efficiency compared to a vacuum only method, and showed the high regeneration efficiency at comparatively low 7-8 Wh energy.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.110-114
• /
• 2000

Determination of mercury(II) using Nafion-EDTA-modified glassy carbon electrodes is proposed. it is based on the chemical reactivity of an immobilized modifier, Nafion-EDTA. Differential pulse voltammetry is employed, and the oxidation of complexes, at +0.43V vs. Ag/AgCl, is observed. For a 5-min preconcentration period, a linear calibration curve is obtained for mercury(II) concentrations ranging from 1.0$\times$ 10$^{-8}$ to 1.0$\times$10$^{-6}$ M. Further, when an approximate amount of copper(II) is added to the test solution, We demonstrate that at a preconcentration time of 5 min the Nafion-EDTA-modified glassy carbon electrode has a dynamic range of 2 orders of magnitude(from 10$^{-10}$ to 10$^{-8}$ M) and the detection limit is as low as 0.5$\times$ 10$^{-10}$ M(0.01 ppb). This method is applied to the determination of mercury(II) in sea water(4.0$\times$10$^{-10}$ M, 0.08ppb). The result agrees satisfactorily with the value(below 0.1 ppb) measured by using ICP/MS.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.309-316
• /
• 2003

EAF(Electric Arc Furnace) Dust classified as special wastes containing heavy metal contaminants may cause to damage an environment such as underground water contamination if they were not treated properly. The possibility of producing the porous sintered body made from EAF Dust/clay composition system was studied. Mixing of EAF Dust and clay was carried out using wet-mixing process and two different sintering methods such as rapid and normal heat treatment were tried. By observing density, porosity and microstructure of sintered bodies, it was found that the bloating phenomenon depend on the contents of C, where the liquid phase occur or not during the sintering process. To obtain a light-aggregate of porous body due to bloating, the rapid heating was better than the normal heating at sintering process.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2001

Due to its low density, good mechanical properties and chemical inertness, glassy carbon(GC) has been studied for appications in several fields. A raw thermosetting resin of furanic resin was polymerized with a curing agent of p-toluenesulfonic acid monohydrate. The maximum yield of GC was obtained at the curing agent content of 1.0 wt% in furanic resin. In order to make thick GC, the affect of graphite filler addition to the furanic resin was investigated. The density and electrical resitivity of GC after graphitization were 1.45 $g/cm^{3}$ and 47 ${\times}10^{-4}$ ${\Omega}$ ${\cdot}$ cm respectively and the amorphous structure of GC was confirmed by XRD profiles with very broad peaks comparable to those of graphite at $206^{\circ}$ and $45^{\circ}$.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.729-734
• /
• 2012

This study investigated the effect of water absorption on the tensile properties of carbon-glass/epoxy hybrid composites at room temperature and $-30^{\circ}C$. To investigate the effect of the position of glass fabric in the hybrid composite on the tensile properties, the stacking pattern of the fiber fabrics for reinforcing was created in three different ways: (a) glass fabrics sandwiched between carbon fabrics, (b) carbon fabrics sandwiched between glass fabrics and (c) alternative layers of carbon and glass fabrics. They were manufactured by a vacuum-assisted resin transfer molding (VARTM) process. The results showed that there was surprisingly little difference in tensile strength at the two different temperatures with dry and wet conditions. However, the water absorption into the hybrid system affected the tensile properties of the hybrid composites at RT and $-30^{\circ}C$. When the glass fabrics were at the outermost layers, the hybrid composite had the lowest tensile properties. This is attributed to the fact that the composite had a relatively high water absorption rate.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.267-280
• /
• 2015

The study was conducted to evaluate effects of time and degree of defoliation on growth of 'Wonhwang' pear (Pyrus pyrifolia Nakai) trees managing with low pesticides as well as regrowth of cuttings in vitro. Treatments included degree of defoliation (20% and 60%) with time of defoliation (Early-Aug, End-Aug, and Early-Sep); Early-Aug (20%), Early-Aug (60%), End-Aug (20%), End-Aug (60%), Early-Sep (20%), Early-Sep (60%), and No defoliation. No defoliation and Early-Sep (20%) defoliation increased growth of water sprouts and new shoots, which were improved by delayed defoliation or 20% of defoliation. Total-C, total-N, B, and free sugar contents increased in No defoliation-shoots but decreased in End-Aug (60%)-shoots. Delayed defoliation increased total-C, total-N, and free sugar in shoots, with high contents of C, K, Ca, Mg, and B observed for 20% of defoliation-trees. Fruit yield and weight or fruit length increased in No defoliation, End-Aug (20%) defoliation, and Early-Sep (20%) defoliation, but reduced in End-Aug (60%). Fruit soluble solids content reduced in defoliation in August. Time of defoliation did not affect the fruit yield and fruit quality, while degree of defoliation influenced yield and fruit weight and length. Defoliation at End-Aug (60%) mostly increased the leakage rates of the stem cuttings at $-18^{\circ}C$ and $-21^{\circ}C$ in vitro and reduced the germination rates at $-24^{\circ}C$ and $-27^{\circ}C$. Under comparison of time and degree of defoliation, the Early-Sep defoliation increased germination rates of the stem cuttings at $-27^{\circ}C$ in vitro, and 60% of defoliation decreased the germination rates compared to the 20% of defoliation.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.261-271
• /
• 2022

Six gas samples were collected from coal and coaly shale from core AA-1, which was acquired from the Asem-Asem Basin, southeast Kalimantan, Indonesia. These coalbed gas samples were analyzed for the molecular composition, carbon isotope (δ¹³C_CH4, δ¹³C_C2, and δ¹³C_CO2), hydrogen isotope (δD_CH4), hydrocarbon index (C_HC), and carbon dioxide-methane index (CDMI) to document their origin and methanogenic pathways. Core AA-1 successively consists of lower clastic sedimentary rocks (Sedimentary Unit-1, SU-1) containing coal and coaly shale, and upper limestone (Sedimentary Unit-2, SU-2), unconformably underlain by serpentinized basement interpreted as part of the Cretaceous Meratus subduction complex (MSC). The coal and coaly shale (SU-1) were deposited in a marshes nearby a small-scale river. Compositions of coalbed gases show that methane ranges from 87.35 to 95.29% and ethane ranges from 3.65 to 9.97%. Carbon isotope of coalbed methane (δ¹³C_CH4) ranges from -60.3 to -58.8‰, while hydrogen isotope (δD_CH4) ranges from -252.9 to -252.1‰. Carbon isotope of coalbed ethane (δ¹³C_C2) ranges from -32.8 to -31.2‰, carbon isotope of coalbed carbon dioxide (δ¹³C_CO2) ranges from -8.6 to -6.2‰. The coalbed CO₂ is interpreted to be an abiogenic origin based on a combination of δ¹³C_CO2 and CDMI and could have been transported from underlying CO₂ bearing MSC through faults. The methanogenic pathways of coalbed gases are interpreted to have originated from primary methyl-type fermentation and mixed with CO₂ reduction, affecting thermogenic non-marine coal-type gases based on analyses of isotopic ratios and various indexes.