• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1159-1165
• /
• 2013

Powder blasting, which is an efficient micromachining method for glass, silicon, and ceramics, has a critical disadvantage in that the surface finish is poor owing to the brittle fracture of materials. Low-pressure waterjet machining can be applied to smoothen the rough surface inside the blasted structure. In this study, the surface roughness and sectional dimension of micro-channels are observed during the repetitive application of a waterjet to blasted micro-channels. The asperities and subsurface cracks created by blasting are removed by waterjet machining. Along with the surface roughness, it is found that the sectional dimension increases and the edges of the finished micro-channel become slightly round. Finally, a microfluidic chip is machined by the blasting-waterjet process and a transparent microfluidic channel is obtained efficiently.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.11-20
• /
• 1989

마이크로 일렉트로닉스(Microelectronics)를 중심으로 하는 산업혁명이 진행되고 있는 시점에서 전자, 광학 또는 신소재 부품에 대한 형상과 치수 또는 표면거칠기에 대한 정확도와 정밀도가 엄격하게 요구되고 있다. 예를 들어 경취 재료인 반도체의 웨이화( w-afer), 수정진동자 자기헷트, 비구면렌즈 또는 연질 금속의 레이저빔(Laser Beam) 프린터 용 포리곤 밀러(Polygon Mirror), 자기디스크, 복사기용 드럼(drum), 레저기기용 반사밀러 등 가공정밀도를 향상시키기 위해서는 과거의 가공기술을 대치할 수 있는 새로운 초정밀가공 기술의 도입이 활발하게 진행되고 있다. 경취성 재료의 초정밀가공은 지금까지는 랩핑(lappi- ng), 폴리싱(polishing)의 가공기술이 주체였으나, 최근의 엄격한 부품정밀도에 대응하기 위하여 전가공을 초정밀 연삭가공으로 평면도,표면거칠기, 가공변질층을 향상시키고 다듬질 가공은 폴리싱으로 하여 표면거칠기를 향상시켜야 하는 가공기술이 보급되고 있다. 일반연질 금속의 다듬질가공은 유리지립을 이용하는 랩핑이나 폴리싱으로 다듬질 가공을 진행하고 있었 으나 형상정도와 표면정밀도를 동시에 얻는다는 것이 어렵고 또 가공시간이 너무 길어서 매우 고가인 것이 되고 말았다. 그러나 유리에서 연질금속으로 재료를 전환시키고 저가격화, 양산 화의 요구, 정밀도 향상과 부품의 안정화 등등 여러 이유로서 다아아몬드(Diamond) 공구로 mirror surface 를 만드는 초정밀 경면연삭 가공기술(precision turning with diamond)의 발달 로 이제는 완전히 새로운 가공기술로 대치되고 말았다. 다이아몬드에 의한 초정밀절삭은 공구 끝이 매우 예리하고 마모가 매우 적은 단결정 다이아몬드를 이용하고 절삭가공 기계는 운동정도 를 피가공물에 정확히 전사 시키는 방법이며 따라서 가공기계는 고도의 운동정밀도가 요구되며 그외에 강성, 진동, 열변이, 제어면에서 엄격한 검도가 있어야 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.850-853
• /
• 2000

최근에 초정밀 제조업 분야에서 볼의 이용에 관한 연구가 급속히 진행되고 있으며, 일부 반도체 분야에서는 BGA(Ball Grid Array)와 같은 용도로 이용되기도 하며, 볼 자체를 반도체 칩으로 응용하려는 시도가 제안되어 있다. 이러한 적용분야들에서 볼의 진구도, 정밀도 및 청정도 등을 만족시킬 수 있는 가공기술이 선결되어야 한다. 본 연구에서는 초정밀 볼의 가공기술 개발을 목적으로 하여 유리 볼을 대상으로 하고 $H_2O$와 CeO$_2$를 혼합한 연마재를 사용하여 부상회전에 의한 비접촉식 연마방법을 제안하고 가공특성을 조사하였다 연구 결과로서, 비 접촉식 볼의 가공에서는 가공에 앞서 $H_2O$와의 전처리 과정을 거침으로 해서 가공속도를 촉진시킬 수 있다는 사실이 확인되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.258-258
• /
• 2011

최근 유연 기판을 이용한 태양전지 및 TFT 등 전자소자 개발에 관한 연구가 주목받고 있다. 본 연구에서는 공정 시 유리한 유리기판상 전자소자 제작 후 폴리이미드막 박리를 통한 유연전자 소자 구현을 목적으로 한다. 폴리이미드막 박리를 목적으로 희생층으로서 a-Si:H을 사용하였다. 유리기판상에 60 nm 두께의 a-Si : H을 ICP (Induced coupled plasma) 공정으로 증착한 후 a-Si : H층 상부에 30 ${\mu}m$ 두께로 폴리이미드를 코팅하여 Hot plate와 furnace에서 열처리를 거쳤다. 이후 각기 다른 파장을 갖는 레이저의 파워를 가변하며 유리 기판 후면에 조사하였다. 실험 결과 355 nm UV 레이저로 가공한 경우 희생층으로 사용 된 a-Si : H층 내에 존재하는 수소가 레이저 빛 에너지에 의해 결합이 끊어지면서 유리기판과 폴리이미드막이 분리됨을 확인하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.51-56
• /
• 2016

High brittleness is a characteristic of glass, and in many cases it is broken during the process of machining due to processing problems, such as scratches, chipping, and notches. Machining defects occur due to the vibration of the equipment. Therefore, design techniques are needed that can control the vibration generated in the equipment to increase the strength of tempered glass. The natural frequency of the machine tool via vibration analysis (computer simulation) must be accurately understood to improve the design to ensure the stability of the machine. To accurately understand the natural frequency, 3D modeling, which is the same as actual apparatus, was used and a constraint condition was also applied that was the same as that of the actual apparatus. The maximum speeds of ultrasonic and high frequency, which are 15,000 rpm and 60,000 rpm, respectively, are considerably faster than those of typical machine tools. Therefore, an improved design is needed so that the natural frequency is formed at a lower region and the natural frequency does not increase through general design reinforcement. By restructuring the top frame of the glass processing, the natural frequency was not formed in the operating speed area with the improved design. The lower-order natural frequency is dominant for the effects that the natural frequency has on the vibration. Therefore, the design improvement in which the lower-order natural frequency is not formed in the operating speed area is an optimum design improvement. It is possible to effectively control the vibrations by avoiding resonance with simple design improvements.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2022

This paper presents the design and manufacture of a Solid State Relay (SSR) life prediction device that can predict the lifetime of an SSR, which is a key component of a glass forming machine. The lifetime of an SSR is over when the current supplied to the relay is overcurrent (20 A or higher), and the operating time is 100,000 h or longer. Therefore, the life prediction device for the SSR was designed using DSP to accurately read the current and temperature values from the current and temperature sensors, respectively. The characteristic test of the manufactured non-contact relay life prediction device confirmed that the current and temperature were safely measured. Thus, the SSR lifetime prediction device developed in this study can be used to predict the lifetime of an SSR attached to a glass forming machine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.225-228
• /
• 2007

Micro solid propellant thruster is the most feasible for development with current MEMS. Basic components of micro solid propellant thruster are diverging nozzle, micro igniter, combustion chamber, and solid propellant. Micro nozzles and micro chambers were fabricated using photosensitive glass by anisotropic wet etching technique. Micro Pt heaters on glass membrane which ignited solid propellant were developed. Components of thruster were integrated. Successful ignition was observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.591-598
• /
• 2012

In this study, the cutting characteristics of bulk metallic glass (BMG) cut using a computer numerically controlled (CNC) lathe were investigated for different insert tool materials and cutting speeds. The surface roughness, chip morphology, cutting forces, and tool wear during turning of $Zr_{50}Cu_{40}Al_{10}$ BMG alloy were examined. Four kinds of tool materials were used to cut an 8-mm-diameter BMG. The examination of the surface roughnesses of the BMG specimens machined at each cutting speed showed that the surface roughness became better as the cutting speed increased, and the tool materials also influenced the surface roughness. The chip morphology investigations showed that the unoxidized BMG chips had serrated curled chips with adiabatic shear bands, while the oxidized chips exhibited local melting and tangling rather than the usual spiral-shaped chips. The cutting force induced during machining of the Zr-based BMG was the largest for the TiN-WC tool, followed by the polycrystalline diamond (PCD) tool. The cermet tool exerted the smallest cutting force.

• Composites Research
• /
• v.19 no.3
• /
• pp.15-22
• /
• 2006

In this study, we prepared glass fiber reinforced polypropylene composites using Brabender twin-screw extruder. Compatibilizer, polypropylene-based maleic anhydride (PP-g-MAH), was used to increase the molecular interaction between polypropylene matrix and glass fiber and to enhance melt processability. We also measured the shear and uniaxial elongational behaviors of glass-fiber reinforced composites in the absence or presence of compatibilizer. The effects of compatibilizer and fiber loading on the viscoelastic behaviors were examined. It was fuund that the PP-g-MAH compatibilizer improved the fluidity and increased the molecular bonding of composite melts in shear flow. Transient elongational viscosity was increased with fiber loadings in uniaxial elongational flow However, it was decreased with increasing elongational rates because of microscale shear flow between fibers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.108-112
• /
• 2011

In order to obtain excellent flatness and surface roughness of glass substrate disk, uniform distribution of abrasives should be important for uniform polishing. We introduced coated-type magnetic abrasives and magnetic field to a lapping for the improvement of surface roughness and removal rate. Polishing properties with the conventional diamond abrasives and the coated-type magnetic abrasives were compared. As a result, the coated-type magnetic abrasives showed small surface roughness and large removal rate by applying magnetic field. And it also was shown that coated-type magnetic abrasives could save the more amount of polishing liquid under the same removal rate than the conventional diamond abrasives can.