• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1834-1839
• /
• 2005

Database security is essential to protect their data in most organization such as hospitals, central or local governments, banks which manage the private, sensitive and important data. Because the duty of the department recently became more various and complicated, the changes of security requirement are needed more frequently. Therefore, easily changeable, flexible security policy and efficient security management with preserving the integrity of security policy are very important. In this paper, we implemented a flexible database security system in the specimen and clinical information management system of leukemic research center using IRH(Improved Role Hierarchy). Data is protected by MAC and we propose a flexible access control and effective administration by using the IRH that is an improved role hierarchy of RBAC. If security policy is needed for changes, this system can do it easily by simply modifying the IRH with the decentralized administration. The modified security policy can be applied flexibly after alteration because the security level of the subject is not fixed but can be derived automatically from the IRH when user connects the system.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.217-222
• /
• 2014

In order to improve the heat efficiency of the general residential boiler, we performed an experiment of condensation heat transfer to air pre-heating exchanger adhered to the condensing boiler. In this study, surface roughness was imposed on the surface of stainless steel by etching. And in order to evaluate the heat transfer performance on each plate, the counter flow heat exchanger fabricated with polycarbonate in used. As a result, on etching treated plate's overall heat transfer coefficient is higher than the original plate. And etching treated plate during 60 seconds with etchant is the to average 15% compared to bare stainless steel. And we studied the heat transfer enhancement factor through the analysis of surface characteristics using AFM.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.273-278
• /
• 1985

A carrier-supported mycelial growth of Penicillium chrysogenum was applied to penicillin fermentation system. Among various materials tested, celite was found to be most effective for both spore adsorption and bioparticle development. Hyphal growth through pore matrices of the material showed strong anchorages and provided highly stable biofilm growths. When 5-10％ celite was employed, both cell growth and penicillin production were observed to increase significantly comparing to the dispersed filamentous growth. Specific productivity of penicillin, however. was found to be kept almost constant at a value of 1,900 unit/g cell/hr. A semicontinuous fermentation in a fluidized-bed reactor. using the tarrier-supported biofilm growth, was conducted successfully although free mycelia appeared in the late phase of the fermentation made the reactor operation difficult. Control of the size of bioparticles was considered as a major operating factor to maintain the reactor productivity at a desired level.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.121-127
• /
• 2011

This paper presents an autonomous formation flight algorithm for micro aerial vehicles (MAVs) and its flight test results. Since MAVs have severe limits on the payload and flight time, formation of MAVs can help alleviate the mission load of each MAV by sharing the tasks or coverage areas. The proposed formation guidance law is designed using nonlinear dynamic inversion method based on 'Leader-Follower' formation geometric relationship. The sensing of other vehicles in a formation is achieved by sharing the vehicles' states using a high-speed radio data link. the designed formation law was simulated with flight data of MAV to verify its robustness against sensor noises. A series of test flights were performed to validate the proposed formation guidance law. The test result shows that the proposed formation flight algorithm with inter-communication is feasible and yields satisfactory results.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.597-601
• /
• 2013

Recently, many studies about the wave power generation system for the marine structure as the hybrid form in linked with the original features have been made of. Of these, the wave power generation system using oscillating water column(OWC) has function to convert wave energy to electrical energy with original function of the break water structure. In this type of generation system, it is important to make the flow of sea water as much as possible without loss. Output characteristics of wave power generation system depending on entrance section were described in the paper. Also, flow quantity changing with entrance section, velocity of sea water and output of wells turbine were measured by simulating OWC wells turbine model in break water, one of the general marine structure. Finally, entrance section was suggested to enhance the energy conversion efficiency based on the results of simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.725-726
• /
• 2017

Recently, IoT (Internet of Things) has been applied to various fields, not limited to places, through continuous research. However, the existing IoT system is based on the surrounding environment rather than the user-oriented operation of the device. therefore, there is a problem in that the efficiency and accuracy of the work are low. In this paper, we propose a user remote control analysis algorithm to solve these problems. When the user performs the remote control, the command is collected and the data is sorted according to the device and time. Analyze time-dependent behavior of devices based on sorted data. based on the results of the analysis, the environment is controlled by operating the device inside the home. Therefore, it is expected that the accuracy and convenience of device operation will be increased by providing customized service to users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3044-3050
• /
• 2015

The purpose of this study is to analyze the performance of the flow control oil pump for automatic transmission. The numerical model for analysis the performance of the flow control oil pump was develop and the characteristics of the internal flow, discharge flow rate, displacement of outer ring, driving torque, generation of cavitation was investigated according to rotating speed. As a result, the cavitation generation increased as the rotating speed increased. The volumetric efficiency was 90% for 2200 rpm and it decreased rapidly, then it decreased about 81% for 5000 rpm. Besides, the cavitation generation was 20%~30% for inlet of suction part, but it reduced below 13% owing to the compression. However, it shows higher cavitation generation for high rotating speed like 5000 rpm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1519-1526
• /
• 2013

This study reviewed the capturing performance of a canopy hood used in some melting processes of a casting manufacturing factory through a site survey. In addition, this study compared and evaluated the flow field and pressure field for the plans to enhance the hazardous air pollutants collection capacity by using CFD model. The case-2(flange attached + double hood) can be improved in terms of collection performance, but is expected to increase in hood static pressure by about 70% more than the existing structure, so it was shown that its site applicability is not good. It is judged that the shape of case-3(flange attached + double cone attached) is most suitable to improve the suction efficiency. This is because a double cone is installed at the center of the opening to concentrate the flow rate on the edge of the hood and control the hume rising to the center of the hood without a static pressure rise via the slope of the cone.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.6
• /
• pp.273-282
• /
• 2016

Visualization tool can be divided by three components - data I/O, visual transformation and interactive rendering. In this paper, we present requirements of three major components on visualization tools for massive scientific dataset and propose strategies to develop the tool which satisfies those requirements. In particular, we present how to utilize open source softwares to efficiently realize our goal. Furthermore, we also study the way to combine several open source softwares which are separately made to produce a single visualization software and optimize it for realtime visualization of massiv espatio-temporal scientific dataset. Finally, we propose a distributed shared memory based scientific visualization tool which is called "GLOVE". We present a performance comparison among GLOVE and well known open source visualization tools such as ParaView and VisIt.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3603-3612
• /
• 2000

This paper presents is for the design and implementation of EDI document exchange system based on XML To create a customized document of the users' choice, it designed and created the transaction processor and the template manager, and to make it accessable with the original EDI, a converter function is included, Also, on this system, this protocol stores EDI message structure that needed to exchange as XML format and controls it as DOM API for user can use previous system, And provides interface for user can create template files with converter and transfer necessary elements that can be chosen by user. For this purpose, This system proposes a shows structure information and document converting mechanism solution of EDI documents based on by using XML which does not show proper document conversion mechanism solution in other system so far.