• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.263-269
• /
• 2003

Morphological development of eggs, larvae and juvenile of the sunrise sculpin, Pseudoblennius cottoides were studed in the field and laboratory at the coastal Dolsan-do, Yeosu-shi from October, 2000 to April, 2001 Egg mass of Pseudoblennius cottoides in peribranchial cavity of Halocynthia hilgendorfi, were observed during late fall to winter in the study area. Fertiliged eggs were spherical in shape, demersal, adhesive, transparent and greenwish yellow color, measuring 1.84 mm (1.83-1.87 mm) in diameter. There were numerous and 17 (15-20) various-sized oil globules accounted in the yolk. Granular materials formed a mass in the yolk. Fertiliged eggs hatched at 301 hr 20 min after morula stage. Newly hatched larvae 6.31 mm (6.24-6.37 mm) in total length (TL), had a large yolk. At 3 days after hatching, the larvae, 6.77 mm (6.69-7.14 mm) in TL came out through the excurrent siphon of Halocynthia hilgendorfi. At 13 days after hatching, the larvae 12.59 mm (12.42-12.63 mm) in TL transformed to postlarval stage. At 32 days after hatching, postlarvae of TL 19.18 mm (19.01-19.46 mm) have reached the juvenile stage.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.4
• /
• pp.73-78
• /
• 2007

The surrounding ground was much transformed by the lateral movement on the soft ground, and consequently the stake basis was damaged. In this case the installed stake is ratted the passive stake, and is actively being researched. When the unevenly distributed load was applied on the stake, and thus the lateral ground pressure was operated, and then the lateral movement was occurred, and consequently the structure is influenced. However, prediction and mechanism for the relationship of piles and abutment deformation is not sufficient. In this paper, coupled three-dimensional finite element analysis, which can be described solid, plate and frame elements at the same time, is developed by the authors. The lateral movement of bridge abutment for the aspect ratio of steel piles on soft clay is clarified by using developed numerical analysis.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.134-137
• /
• 2007

The temporal evolution of wake behind a circular cylinder oscillating rotationally with a relatively high forcing frequency has been investigated experimentally using a dynamic PIV technique. Experiments were carried out with varying the frequency ratio $F_R\;(=f_f/f_n)$ in the range from 0.0 (stationary) to 1.6 at oscillation amplitude of ${\theta}_A=30^{\circ}$ and Reynolds number of $Re=4.14{\times}10^3$. Depending on the forcing condition ($F_R$), the flow was divided into three regimes; non-lock-on ($F_R=0.4$), transition ($F_R=0.8$, 1.6) and lock-on regimes ($F_R=1.0$) with markedly different flow structure in the near-wake region behind the cylinder. When the frequency ratio was less than 1.0 ($F_R{\le}1.0$), the rotational oscillatory motion of the cylinder decreased the length of the vortex formation region and enhanced the mutual interaction between large-scale vortices across the wake centerline. The entrainment of ambient fluid seemed to play an important role in controlling the near-wake flow and shear-layer instability. However, the flow characteristics changed markedly beyond the lock-on flow regime ($F_R=1.0$) due to high-frequency forcing. At $F_R=1.6$, the mutual interactions between the vortices shed from both sides of the cylinder were not so strong. Thereby, the flow entrainment and momentum transfer into the wake center region were reduced. In addition, the size of the large-scale vortices decreased since the lateral extent of the wake was suppressed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.9
• /
• pp.843-850
• /
• 2010

This In this paper, we describe the performance characteristics of a turbo blower as a function of the shape of the volute casing: expansion diameter and width of the volute casing. The turbo blower considered in the present study is mainly used in a refuse collection system. The flow characteristics inside the turbo blower were analyzed by a three-dimensional Navier-Stokes solver and compared with experimental results. The distributions of pressure and efficiency obtained by numerical simulation were in good agreement with those determined experimentally. Throughout the numerical simulation of the turbo blower, the blower performance was enhanced by decreasing the local losses in the blade passage and the outlet flow. The efficiency and pressure for the design flow condition were enhanced by about 3% and 2%, respectively, compared to the efficiency and pressure of the reference blower. Detailed flow analysis was performed using the results of the numerical simulation

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.323-333
• /
• 1997

An objective method for the generation of velocity streamfunction is presented for dealing with discretely sampled oceauc data. The method treats a Poisson equation (forced by vorticity) derived from Helmholtz theorem In which streamfunction is obtained by isolating the non-divergent part of the two-dimensional flow field. With a mixed boundary condition and vorticity field estimated from observed field, the method Is Implemented over the Texas-Louisiana show based on the current meter data of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX) measured at 31 moorings for 32 months (April 1992 - November 1994). The resulting streamfunction pattern is quote consistent with observations. The streamfunction field by this method presents an opportunity to initiauze and to verier computer models for local forecasts of enoronmental flow conditions for ell spill, nutrient and plankton transports as well as opportuuty to understand shelf-wlde low-frequency currents.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.598-605
• /
• 1985

Laminar natural convection heat transfer past an outer rectangular corner was experimentally investigated by using Mach-Zehnder interferometer. The present geometry represents the case when the plume from a vertical flat plate and that from a horizontal one merge into a single plume. the temperature distribution and the local heat flux were measured in the range of Grashof number 8 * 10$^{4}$$r_{LH}$ <1.25 * 10$^{6}$ . The effect of the geometric aspect ratio was also considered. Correlation for the average Nusselt number vs. Grashof number was obtained by using a newly determined characteristic length. To determine the interaction of the plumes, the present results were compared with the similarity solutions available from the isolated vertical and isolated horizontal flat plates.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.301-310
• /
• 2006

Smectites were synthesized from Na-P type and Na-A type zeolites by the hydrothermal synthetic method, and their physicochemical properties were studied. The optimal synthetic conditions for producing smectite were $290^{\circ}C$, 72 hr and $75{\sim}100kgf/cm^2$ in autogenous pressure. pHs of initial reaction solutions for the synthesis of smectites from Na-P type and Na-A type zeolite s were pH 6 and pH 10, respectively. The synthetic smectite was confirmed as $12{\AA}$-beidellite by a series of analysis such as X-ray diffraction analysis with random and oriented mounts, ethylene glycol treatment, and Greene-Kelly test, and their several physicochemical properties were studied.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.3
• /
• pp.166-178
• /
• 2012

In order to simulate storm surge for the west coast, complex physics of asymmetrical typhoon wind vortex, tide and wave are simultaneously incorporated on a fine finite element mesh extended to the North Western Pacific sea. Asymmetrical vortex based on maximum wind radii for each quadrant by JTWC's best tracks are input in pADCIRC and wave stress is accounted by dynamic coupling with unSWAN. Computations performed on parallel clusters. In hindcasting simulation of typhoon Kompasu(1007), model results of wave characteristic are very close with the observed data at Ieo island, and sea surface records at major tidal stations are reproduced with satisfaction when typhoon is approaching to the coast. It is obvious that increasing of local storm surges can be found by introducing asymmetrical vortex. Thus this approach can be satisfactorily applied in coastal hazard management against to storm surge inundation on low level area and major harbor facilities.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2006

In order to strengthen the competitiveness of port against calling for the huge vessel and reducing the shipping service time, the productivity of container terminal must be improved. This productivity variously results according to the kinds of productivity evaluation model, input elements like yard, equipment, employee, facility, etc,. But, it is discussed that the productivity is measured by partial productivity evaluation model or general input elements. Therefore, we measured for the productivity of the container terminal using the Developed the data Envelopment Analysis (DEA), which is developed in order to evaluate the relative efficiency of decision making units - it's difficult to clear cause and effect between input and output. We measured the whole productivity of container terminal in Busan according to decision of the correct input elements. And we investigated the change of the productivity measurement result according to input elements, presents more accurate productivity evaluation model in container terminal.