• Journal of Korea Ship Safrty Technology Authority
• /
• v.18
• /
• pp.26-38
• /
• 2005

본 논문에서는 KRISO에서 개발한 선형설계 전용 프로그램인 HCAD와 조파저항 계산 프로그램인 WAVIS를 사용하여 소형 어선을 개발한 예를 보이고 있다. 소형 고속 어선으로 사용되고 있는 차인형 선형을 기준선으로 하여 둥근바닥 선형(Round Bilge Hull Form)을 설계한 과정과, 두 가지 선형에 대한 저항 특성을 이용하여 선체 주위의 유동장과 조파저항을 계산 하였다. 차인형 선형의 저항 특성이 둥근 바닥 선형에 비해 다소 크게 나타났으나 소형 조선소의 건조비를 감안하여 차인형 선형에 대한 저항 감소를 시도하였다. 차인형 선형은 최근 어선의 고속화에 따라 고속 운항시 과도한 선수파가 발생하기 쉽고, 심한 트림이 발생할 가능성이 있으므로, 이러한 문제를 해결하기 위해 선미웨지를 설계하였으며, WAVIS를 이용한 수치계산에 의해 저항 성능이 개선되었음을 확인하였다.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1995

분류층 가스화기 설계를 위한 일차연구로서 가스화기 종횡비, 주입方法, 선회강도 및 주입속도 등에 따른 비반응 난류장 특성을 수치해석적 방법에 의해 파악하였다. 수치해석은 검사체적에 기초한 Patankar의 유한차분방법을 이용하였으며 압력과 속도의 연계문제는 SIMPLEC 알고리즘을, 레이놀즈 전단력은 K- 난류모델을 사용하였다. 입자궤적 계산은 공기역학적 향력만을 고려하였으며 비선형적인 공기저항력에 의한 난류변동상관모델은 고려치 않았다. 이차공기 주입방법(parallell injection과 nonparallel 3$0^{\circ}C$ imjection)에 따른 수치해석을 수행하여 Ar tracer의 질량분율 및 기타 속도에 대한 實驗資料와 비교하여 만족할 만한 結果를 얻었다. 나아가서 假想的인 가스화기 모델을 대상으로 가스화기의 종횡비, 선회강도, 주입속도 및 주입각 등에 따른 와류 形成 위치 등을 포함한 유동장 특성 및 입도에 따른 궤적분석을 시도하였다.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.393-396
• /
• 1998

To examine the influence of unsteady wake on the flow and heat transfer characteristics, an experiment has been conducted in a four-vane linear cascade. Flow and heat transfer measurements are made for the inlet Reynolds number of 66000(based on chord length and free-stream velocity). Turbulent intensity and stress were measured using hot wire anemometer, and to measure the convective heat transfer coefficients on the blade surfaces liquid crystal/gold film Intrex technique was used. The disturbance by the unsteady wake is characterized by the unresolved unsteadiness. The unsteady wake enhances the turbulent motion of flow in the cascade passage. It also promotes the boundary layer development and transition. The results show that heat transfer coefficients on the suction surface increase with increasing unresolved unsteadiness.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.213-218
• /
• 1999

용융탄산염 연료전지 (MCFC) 스택의 운전시에 가장 문제가 되는 사항들 중의 하나는 전지 반응에 의해 생성되는 많은 열량으로서, 이로 인해 내부 온도가 상승하고 심한 온도 분포가 존재하게 되며 이는 출력 전압 또는 전류의 불균일을 초래하는 동시에 전지 성능 열화(degradation)를 가속시켜 장기 운전에 큰 장애 요인이 된다. 현재 국내에서 개발중인 100kW급 MCFC 발전 시스템의 스택은 전극 면적이 6,000 $ extrm{cm}^2$ 혹은 그 이상에 이르며 25 kW 모듈당 적층되는 전지는 40장으로서 운전시의 발열량 조절이 매우 큰 문제로 등장한다.(중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.296-296
• /
• 2019

전 세계적으로 기후변화로 인한 국지성 집중호우 및 태풍으로 인한 피해가 지속적으로 발생하고 있으며, 그에 따른 2차 피해인 산사태 및 토석류 피해 또한 증가하고 있는 추세이다. 최근 국내의 산사태 및 토석류에 대한 선행연구는 지속적으로 수행되고 있으나, 산사태 및 토석류 위험성이 높은 구간, 즉, 발생기작을 판단할 수 있도록 지표화 해놓은 것이며, 현재 피해예측지도 및 피해 하류부의 시설물을 고려한 연구는 미비한 실정이다. 따라서 본 연구에서는 강우-유출모형인 S-RAT모형 및 토석류 수치해석 프로그램 RAMMS 모형을 이용하여 산사태 및 토석류 피해를 극대화 시키는 인자인 토석유동심(H), 토석유속(V)을 이용하여 토석류피해예측지도를 작성하였으며, 피해 하류부의 시설물을 건물 유형별 시설물의 중요도로 구분하였다. 또한 작성된 피해예측지도 및 시설물 중요도를 중첩하여 위험성 지도를 제시하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.310-311
• /
• 2023

우리나라 범죄율이 지속적으로 상승함에 따라 시민들의 불안은 커져가고 있다. 특히 밤길에 혼자 다니는 것을 불안하게 느끼는 '밤길 불안'이 심해지는 요즘, 안전한 길을 제공하여 사회적 불안감을 낮춰주는 서비스의 필요성이 요구된다. 이에 본 논문에서는 안전 데이터를 활용하여 사용자에게 안전한 길을 안내해주는 애플리케이션을 개발하여 사회 안정성과 공익성에 기여하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.185-194
• /
• 2012

Deepwater oil is becoming more attractive because most onshore and shallow water oil is developing or developed. With the on-going trend to deepwater oil developments, flow assurance problems which prevent oil flow from reservoir to processing facilities are becoming an issue because deposited material can be occurred in case oil is exposed to very different environment from reservoir. Wax deposition which is one of flow assurance problems can be a major technical and economic issue because it is very sensitive to temperature. In order to predict and mitigate wax problems, the precise measurement of wax appearance temperature (WAT) which is the starting temperature of wax precipitation is very important. Various methods have been suggested for WAT measurement of opaque oil because there is no standard method for opaque oil. In this study, the WAT of opaque oil samples was measured using viscosity measurement method, differential scanning calorimetry, filter plugging method, and pressurized filter plugging method. Wax deposition test and high temperature gas chromatography analysis were applied to verify measured WAT. As a result of study, the WAT of opaque oils was successfully measured and verified. If WAT measurement methods of opaque oil related to oil characteristics is systematized using the results of this study, it can be a valuable tool for WAT measurement of opaque oil and flow assurance related to wax deposition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.601-610
• /
• 2021

The tidal current patterns at Keum River Estuary before and after the construction of coastal structures were compared according to the CASES. The depth-integrated and tidal difference treatment applied FLOW2DH numerical model was used for the tidal current predictions. The test conditions consisted of before construction of coastal structures (CASE1), after construction of coastal structures (CASE2), and the addition of watergate operation(CASE1Q and CASE2Q), and present (CASE3). CASE1 showed a stable tidal current pattern, such as a natural estuary. In CASE2, the tidal current velocities and directions of the Keum River Estuary were changed due to the installed coastal structures. In particular, the tidal current velocities of the Gaeya open channel sections (P5~P9) in CASE2 were calculated to be 10~30% larger than that of CASE1. In the case of the Gunsan Inner Harbor (P4), which is closest to the Geum River Estuary, the ebb flow rate was approximately 250~300% faster than that of other CASEs due to the discharge of the watergate operation for 2.7 hours during the ebb of CASE1Q and CASE2Q. This will affect sediment transport, and it is predicted to lead to seabed changes. CASE3 is considered to be entering the stabilization stage according to the simulation of the tidal current velocities and directions of the Keum River Estuary and the surrounding coastal area.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.173-186
• /
• 2019

The purpose of this study is to design and apply a pilot inquiry experiment focusing on the epistemological issues of scientific activities, and derive educational implications by analyzing experimental activities and reflective discussions. Three graduate students who major in science education participated in the study voluntarily. Participants showed the characteristics of stable enquiry in Experiment 1. However, the small but continuous changes in Experiment 2 led the experiment to a phase of fluid enquiry seeking new theories. Participants mobilized various resources, proposed new hypotheses, and models and requested additional experiments to verify them. In the process of reflective discussions, the participants led to the following three epistemological issues. First, at the beginning of the experiment, their observations were theoretically dependent. Second, when the observations were no longer coherent with theory, they face a crisis, and the adjustment of observation and theory proceeds. Third, stable enquiry and fluid enquiry are performed according to the relationship between observation and theory. The educational implications of school science inquiry based on the above process and results are as follows: First, this study shows that fluid enquiry can follow stable enquiry naturally, and examples of the activities are presented together. Second, in this study, it was confirmed that participants could draw up epistemological issues based on their experiences through reflective discussions following inquiry.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2021

In order to analyze wave propagation, tidal current, and sediment transport in the vicinity of the Gaeya open channel, it was classified into before(CASE1W) and after(CASE2W) installation of various artificial structures, and the calculation results for CASE1W and CASE2W were compared. For wave propagation, the results of incident and reflected waves were derived using the SWAN numerical model, and the tidal current velocity results were derived using the FLOW2DH numerical model for tidal current. The results of the SWAN numerical model and the FLOW2DH numerical model became the input conditions for the SEDTRAN numerical model that predicts sediment transport, and the maximum bed shear stress and suspended sediment concentration distribution near the Gaeya open channel were calculated through the SEDTRAN numerical model. As a result of the calculation of the SWAN numerical model, the wave height of CASE2W was increased by 40~50 % compared to CASE1W because the incident wave was diffracted and superimposed and the reflected wave was generated by about 7 km long northen jetty. As a result of the calculation of the FLOW2DH numerical model, According to the northen breakwater, the northen jetty and Geumrando, CASE2W was calculated 10~30 % faster than CASE1W in the tidal current of the Gaeya open channel. As a result of the calculation of the SEDTRAN numerical model, the section where the maximum bed shear stress is 1.0 N/m² or more and the suspended concentration is 80mg/L or more was widely distributed in the Gaeya open channel from the marine environment by the complex wave field(incident wave, reflected wave and tidal wave) and the installation of various artificial structures. it is believed that a sedimentation phenomenon occurred in the Gaeya open channel.