• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.2
• /
• pp.10-18
• /
• 2003

This paper presents a method for designing guaranteed cost fuzzy filter with a desired H$_{\infty}$ disturbance rejection constraint of delayed fuzzy dynamic systems. This method not only guarantees an induced L$_2$ norm bound constraint on disturbance attenuation, but also minimizes an upper bound on a linear quadratic performance measure. A sufficient condition for the existence of guaranteed cost fuzzy filter with H$_{\infty}$ constraint is then presented in terms of linear matrix inequalities(LMIs). A simulation example is given to illustrate the design procedures and performances of the proposed methods.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.1029-1039
• /
• 1992

This paper presents the filtering method which is processed on the frequency domain among Hangul character recognition methods. It is processed the Hangul character parrern with spatial positioning modulation and mapped the Hangul character element which have spatial position variant feature onto frequency domain, at this time, normalized spatial position and so normalized the character size in frequency domain. And it is grouped the Hangul character element according to the generating position and set the standard pattern, and used each standard character element pattern with character element filter and filtering the character pattern of Hangul character, it is derived the normalized cross correlation function and the coherence function led to the filtering results, and calculated classification threshold.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.829-835
• /
• 2002

When finite length image signal is decomposed into M-band synthesized using M-band orthogonal wavelet transform, the boundary signal of image are not reconstructed perfectly. for boundary signals to be reconstructed perfectly, different type filter bank or technique is applied to them when the dimension of analysed is proposed. It can be designed using the singular value decomposition of boundary perfect reconstruction matrix which is obtained from paraunitary matrix which is obtained from paraunitary matrix. And it is also discussed to design the boundary filter bank for improving the coding performance when it is applied to subband coder. The proposed boundary filter bank shows 7% gains in PSNR compared with reflected method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1196-1202
• /
• 2001

본 논문에서는 대역통과 필터특성을 위해 통과대역의 상단과 하단의 저지대역에서 감쇄극을 갖는 두 종류의 새로운 마이크로스트립 구조를 제안한다. 이 구조는 TEM모드의 유전체 공진기를 마이크로스트립선로에 용량성 또는 유도성의 병렬 포스트와 연결하여 구성된다. 제안한 구조에 대한 등가회로를 추출하였다. 이 구조의 S-파라미터를 실험과 등가회로 시뮬레이션으로 구하였고, 그리고 유도성포스트의 경우는 3D-FDTD 계산을 추가하여 서로를 비교하였는데 등가회로 모델이 이들 결과와 매우 잘 일치하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.428-431
• /
• 2001

토목합성재료(Geosynthetics) 중 배수용으로 사용되는 재료는 기능상 유체의 흐름을 수평방향으로 유도하는 재료를 의미하며, 일반적으로 저장된 유체를 수직으로 이동시키는 필터기능을 가지는 1,000g/㎡ 미만의 지오텍스타일(geotextiles)과 수평방향의 유도로를 확보한 지오네트(geonets)를 결합시킨 지오네트 복합제품이 사용되고 있다. 이러한 배수용 토목합성재료는 쓰레기 매립장의 건설 시 침출수의 외부유출을 차단하기 위하여 설치하는 차수막인 지오멤브레인(geomembranes)을 매립된 쓰레기 하중 및 외부의 충격으로부터 보호하는 용도로 사용된다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.107-113
• /
• 2019

In this paper, a robust filter based wind velocity estimation algorithm without an air velocity sensor in an air vehicle is presented. The wind velocity is useful information for the air vehicle to perform precise guidance and control. In general, the wind velocity can be obtained by subtracting an air velocity which is obtained by an air velocity sensor such as a pitot-tube, and a ground velocity which is obtained by a navigation equipment. However, in order to simplify the configuration of the air vehicle, the wind estimation algorithm is necessary because the wind velocity can not be directly obtained if the air velocity measurement sensor is not used. At this time, the aerodynamic coefficient of the air vehicle changes due to the turbulence, which causes the uncertainty of the system model of the filter, and the wind estimation performance deteriorates. Therefore, in this study, we propose a wind estimation method using $H{\infty}$ filter to ensure robustness against aerodynamic coefficient uncertainty, and we confirmed through simulation that the proposed method improves the performance in the uncertainty of aerodynamic coefficient.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.261-272
• /
• 2005

3D models in urban areas are essential for a variety of applications, such as virtual visualization, GIS, and mobile communications. LIDAR (Light Detection and Ranging) is a relatively new technology for obtaining Digital Terrain Models (DTM) of the earth's surface since manual 3D data reconstruction is very costly and time consuming. In this paper an approach to extract ground and non-ground points data from LIDAR data by using filtering is presented and the accuracy for generating DTM from ground points data is evaluated. Numerous filter algorithms have been developed to date. To determine the performance of filtering, we selected three filters which are based on the concepts for height difference, slope, and morphology, and also were applied two different data acquired from high raised apartments areas and low house areas. From the results it has been found that the accuracy for generating DTM from LIDAR data are 0.16 m and 0.59 m in high raised apartments areas and low house areas respectively. We expect that LIDAR data is used to generate the accurate DTM in urban areas.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.938-942
• /
• 2009

In this paper, we propose a novel filtering method for processing continuous skyline queries on wireless sensor network environments. The existing filtering methods use the filter based on router paths. However, because these filters are applied not to a whole area but to a partial area, these methods send almost data of sensor nodes to transmit to the base station and have no sufficient effect in terms of energy efficiency. Therefore, we propose an efficient method to dramatically reduce the transmission data of sensors through applying a low-cost and effective filter to all sensor nodes. The proposed effective filter is generated by using characteristics such as the data locality and the clustering of sensors. An extensive performance study verifies the merits of our new method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.127-135
• /
• 2010

In motion adaptive temporal noise reduction filtering used for reducing video noises, the strength of motion adaptive temporal filtering should be carefully controlled according to temporal movement. This paper presents a motion adaptive temporal filtering scheme based on least-square training. Each pixel is classified to a specific class code according to temporal movement, and then, an iterative least-square training method is applied for each class code to find optimal filtering coefficients. The iterative least-square training is an off-line procedure, and the trained filter coefficients are stored in a lookup table (LUT). In actual noise reduction filtering operation, after each pixel is classified by temporal movement, simple filtering operation is applied with the filter coefficients stored in the LUT according to the class code. Experiment results show that the proposed method efficiently reduces video noises without introducing blurring.