• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.201-204
• /
• 2002

A large area inductively coupled plasma which is applicable to LCD processing is built with a modified single loop RF antenna. Combination of parallel and series paths of RF current through the antenna induces local enhancement of plasma density, which in turn provides uniform plasma density near the substrate. The plasma density distribution is measured and compared with that of the conventional single loop antenna. Aisotropic etching of photoresist is performed, and it is found that etch uniformity is improved by 3％ from 15% of the conventional etcher over 350$\times$300mm glass substrates. Photoresist etching rate and uniformity can be further improved by applying a periodic weak axial magnetic fieid.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.438-440
• /
• 1995

The impedance characteristics and plasma parameters were experimentally studied in a weakly magnetized planar type, inductively coupled plasma (ICP) system. Compared with non-magnetized for system higher power transfer efficiency, stable impedance matching, enhancement of plasma density and higher electron temperature can be obtained. Such improvements are mainly due to the excitation of deeply penetrating electromagnetic wave and reduction of radial loss of electrons. In particulary, $SF_6$ (sulfur hexafluride) plasma shows unstable impedance matching in non-magnetized ICP because electronegativity of $SF_6$ effects on plasma characteristics. But, magnetized inductively coupled $SF_6$ plasma shows enough impedance matching stability to be applicable to the polysilicon etching in semiconductor process.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.276-278
• /
• 1997

The reliable etching process is one of the essential steps in fabricating GaN based-device. High etch rate is needed to obtain a deeply etched structure and perfect anisotropic etched facet is needed to obtain lasing profile. In the research, therefore, we had proposed a planar inductively coupled plasma etcher (Planar ICP Etcher) as a high density plasma source, and studied the etching mechanism using the $CH_4/H_2$/Ar gas mixture. Dry etching characteristics such as etch rate, anisotropic etching profile and so on, for the III-V nitride layers were investigated using Planar ICP Etcher, based on the plasma characteristic as a variation of plasma process parameters.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.323-325
• /
• 1995

An Inductively Coupled Plasma(ICP) was employed to prepare the Diamond-Like Carbon film with $CH_4$ gas. We observed the changes of mechanical, optical properties and internal stress of the films according to the variation of discharge power and negative-self bias. When weak magnetic field is applied, the properties of film are observed to change drastically. In magnetized case, the micro-hardness and the internal stress increase up to critical point and droped down in marked contrast to unmagnetized case. It suggests that large amount of ion flux exists due to high dissociation rate of the reactive radicals in plasma with magnetic field as reported elsewhere. As a result of FT-IR absorption measurement it could be confirmed that the $CH_x$ bonding and the micro-hardness and the internal stress decreased with the increase of negative-self bias.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.149-152
• /
• 1999

This paper represents the characteristic analyses for the etching in SF6 plasma and the plasma itself, based on the specific knowledges on the discharge mechanism of SF6 plasma which is widely used for the applications of dry etching, using Radio Frequency Inductively Coupled Plasma (RFICP) by measuring electron density, electron temperature then observing their relationship to find the effect of discharge mechanism of SF6 plasma to the etching in contrast to the existing method of finding optimal discharge condition by heuristic.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1111-1113
• /
• 1999

This paper represents the characteristic analysis for the etching in $SF_6$ plasma and the plasma itself, based on the specific knowledges on the discharge mechanism of $SF_6$ plasma which is widely used for the applications of dry etching, using Radio Frequency Inductively Coupled Plasma (RFICP) by measuring electron density, electron temperature then observing their relationship to find the effect of discharge mechanism of $SF_6$ plasma to the etching in contrast to the existing method of finding optimal discharge condition by heuristic.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.103.1-103.1
• /
• 2017

Nanocrystalline HfN coatings were prepared by reactively sputtering Hf metal target with N2 gas using a magnetron sputtering system operated in DC and ICP (inductively coupled plasma) condition with various powers. The effects of ICP power, ranging from 0 to 200 W, on the coating microstructure, corrosion and mechanical properties were systematically investigated with FE-SEM, AFM, potentiostat and nanoindentation. The results show that ICP power has a significant influence on coating microstructure and mechanical properties of HfN coatings. With the increasing of ICP power, coating microstructure evolves from the columnar structure of DC process to a highly dense one. Average grain size and nano hardness of HfN coatings were also investigated with increasing ICP powers.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.4
• /
• pp.513-520
• /
• 1999

In this study, we investigated the effects of variously configured magnets on the characteristics of the plasmas to enhance plasma uniformity and density of an inductively coupled plasma source. As the magnets, Helmholtz type axial electromagnets and various multi-dipole magnets types around the chamber wall were used. To characterize the plasma as a function of the combination of the magnets and magnetic field strengths, ion density, electron temperature, and plasma potential were measured using an electrostatic probe along the chamber diameter for Ar plasmas. The measured maximum ion densities were $8$\times$10^{ 11}$$cm^{-3}$ with 600W inductive power and at 5mTorr of operational pressure and the uniformity of ion density was less than 5.9% at 2mTorr of operational pressure. The combination of an optimized multi-dipole magnet type and an axial electromagnet showed the lowest electron temperature (3eV) and plasma potential ($34V{p}$ )

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.83-92
• /
• 1999

GaN etching was performed using planar inductively coupled $Cl_2$-based plasmas and the effects of main process parameters on the characteristics of the plasmas and their relations to GaN etch rates were studied. Also, the GaN etch mechanism was investigated using a Langmuir probe and optical emission spectroscopy (OES) during the etching, and X-ray photoelectron spectroscopy (XPS) of the etched surfaces. The GaN etch rates increased with the increase of chlorine radical density and ion energy, and a vertical etch profile haying the etch rate close to 4000 $\AA$/min could be obtained. The addition of 10% Ar to $Cl_2$ gas increased the GaN etch rate and the addition of Ar (more than 20%) and HBr generally reduced the GaN etch rate. The GaN etch rate appeared to be more affected by the chemical reaction between Cl radicals and GaN compared to the physical sputtering itself under the sufficient ion bombardments to break GaN bonds.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.198-198
• /
• 2014

Plasma를 이용하는 대면적 디스플레이 공정에서 균일도는 매우 중요한 요소 중 하나이다. 이를 향상시키기 위하여 본 연구에서는 pulsed plasma를 이용하여 duty ratio를 조절함으로써 균일도를 향상시켰으며, plasma on/off time을 이용하여 electron temperature를 낮추어 plasma에 의한 damage를 감소시키려 하였다. 또한 optical emission spectroscopy(OES)를 이용하여 pulse condition에따라 변하는 ion species peak을 실시간으로 확인하였다.