• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.590-593
• /
• 2011

A novel organotin(IV) complex has been prepared from $Bu_2SnCl_2$ and the N, O and S donor ligand, 5-(p-dimethylaminobenzylidene) rodanine (HL). The ligand is deprotonated in the presence of a base and the complex with the general formula $SnBuCl_2L$ is formed. This complex was fully characterized by IR, $^1H$ NMR and $^{119}Sn$ NMR and elemental analysis. Spectroscopic data indicate the ligand is coordinated through the oxygen atom to the tin and the coordination number of four is supported by $^{119}Sn$ NMR data in solution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.115-119
• /
• 2001

Hydroxyapatite-yttria stabilized zirconia bioceramics containing fine zirconia particles were prepared as 3-layered functionally graded materials (FGMs) using a spark plasma sintering (SPS) and hot pressing (HP) apparatuses. The pretreatment of the raw hydroxyapatite promoted the sinterability of hydroxyapatite. The maximum density of pretreated FGM composites could be obtained at lower temperature than that for he untreated FGM samples. No decomposition from hydroxyapatite to three calcium phosphate (TCP) was observed in FGMs of HAp-$ZrO_2$ sintered below $1200^{\circ}C$ for 8 min under 10 MPa by SPS. However, the transformation of the tetragonal zirconia to the cubic modification had occurred in FGMs at this temperature. The presence of zirconia i.e. stress induced transformation of zirconia may be expected to enhance the mechanical properties of HAp-$ZrO_2$ FGM. The SPS is concluded as a better method to fabricated the FGM with dense and high strength compared with HP process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.199-204
• /
• 2022

A new three-dimensional Gd-MOF, [Gd(p-XBP4)₄(H₂O)]·W(CN)₈; (1; p-XBP4 = N,N'-p-phenylenedimethylenbis (pyridin-4-one)) has been synthesized by slow-evaporation and its crystal structure was characterized by single-crystal X-ray diffraction (SCXRD) analysis. For each Gd^III ion, there are seven coordination sites, which are occupied by six oxygen atoms of six p-XBP4 ligands and one oxygen atom from the water molecule. The [W(CN)₈]^3- anion exists for charge balance with cationic framework. The Gd^II ions are interconnected by the p-XBP4 ligand to form the three-dimensional structure. Considering the magnetic property of lanthanide ions, magnetic studies of Gd-MOF were investigated by direct-current (DC) magnetic susceptibilities measurements.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.85-94
• /
• 1973

The stability constants of the charge-transfer complexes formed between three derivatives of nitrobenzene, i.e., 1,3,5-trinitrobenzene, m-dinitrobenzene, nitrobenzene and eleven organic molecules such as $\alpha-picoline$, pyridine, dimethylsulfoxide, N, N'-dimethylacetamide, tetrahydrofurane, 1, 4-dioxane, diethyl ether, acetonitrile, propylene oxide, epichlorohydrine, and methyl acetate, have been determined by ultraviolet absorption spectroscopy in carbon tetrachloride solution at 25.0$^{\circ}C$. The parameters of the electrostatic effect ($E_D$) and covalent effect ($C_D$) for the eleven organic compounds have been calculated from the modified equation of the double-scale enthalpy,$logK = E_AC_A+E_DC_D$ and also the shift of C=O vibrational frequency in infrared spectra for N,N'-dimethylacetamide have been measured from the solutions of above organic compounds. The empirical equation, ${\Delta}{\nu}_{C=O} = 37.4-5.47E_D+12.1C_D$, related to the parameters and the frequency shift has been derived. It seems that the stabilities of the complexes principally depend on the covalent effect. Especially it is found that $\pi$ orbitals in molecules, in addition to the parameters, play the important role in forming the charge-transfer complexes.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.524-531
• /
• 2021

Depending on the type and amount of acid used as a modulator in the manufacturing process, the structural properties of UiO-66 can be modified and the adsorbability of chemical warfare agents can be enhanced. In this study, several acids as a modulator were used to synthesize UiO-66. Their properties were analyzed with FT-IR, XRD, titrator, and adsorption isotherms using chemical warfare agent simulant, DIMP. The UiO-66, structurally damaged by hydrochloric acid as a modulator, showed lower crystallinity and DIMP adsorption capacity and also smaller specific surface area and volume of voids compared to those of UiO-66, which was manufactured using acetic acid, and formic acid as a modulator. Additionally, UiO-66 which was synthesized by adding formic acid and hydrochloric acid as a modulator, showed the highest DIMP adsorption capacity and is likely to be used as an adsorbent for chemical warfare agent in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.388-394
• /
• 2008

본 논문에서는 용액 공정을 이용한 고분자 절연층을 갖는 top-gate 구조의 펜타센 박막 트랜지스터(Thin Film Transistor, TFT)의 특성을 연구하였다. Top-gate 구조의 펜타센 TFT 제작에 앞서 유기 반도체인 펜타센의 결정성 성장을 돕기 위해서 가교된 PVP (cross-linked poly(4-vinylphenol))를 유리 기판 상에 스핀 코팅을 이용하여 형성한 후, 노광 공정을 통해 니켈/은 구조를 갖는 채널 길이 $10{\mu}m$의 소오스, 드레인 전극을 형성하였다. 그리고 열 증착을 이용하여 60 nm 두께의 펜타센 층을 성막하였고, 고분자 절연체로서 PVA(polyvinyl alchol) 또는 가교된 PVA를 용액공정인 스핀 코팅을 이용하여 형성한 후 열 증착으로 알루미늄 게이트 전극을 성막하였다. 이로써 제작된 소자들의 전기적 특성을 확인한 결과 가교된 PVA를 사용한 펜타센 TFT 보다 PVA를 게이트 절연체로 사용한 소자가 전기적 특성이 우수한 것으로 관찰되었다. 이는 PVA의 가교 공정에 의한 펜타센 박막의 성능 퇴화에 기인한 것으로 사료된다. 실험 결과 $0.9{\mu}m$ 두께의 PVA 게이트 절연막을 사용한 top-gate 구조의 펜타센 TFT의 전계 효과 이동도와 문턱전압, 그리고 전류 점멸비는 각각, 약 $3.9{\times}10^{-3}\;cm^2/Vs$, -11.5 V, $3{\times}10^5$으로써 본 연구에서 제안된 소자가 용액 공정형 top-gate 유기 TFT 소자로서 우수한 성능을 나타냄을 알 수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.247-253
• /
• 1997

Development of soybean cultivars with great nodulation and high nitrogen fixation activity, derived mostly from mutagenesis, may decrease inputs of chemical fertilizer nitrogen into the soil-plant system. Soybean seeds (cv. Jangyupkong, Hwanggeumkong, and Geomjungkong 1) were treated with three different levels of EMS (ethyl methanesulfonate) concentration(30, 50, and 70mM). Increasing the doses of EMS resulted in decreased field emergence rate of seeds, whereas it did not increase M$_2$ mutation frequencies. This indicated that the most efficient concentration of EMS was 30mM for generating mutants. Extensive mutagenesis of Sinpaldalkong 2 with 30mM EMS was undertaken to isolate soybean mutants with greater nodulation. Approximately 8, 200 M$_2$ families were screened for greater nodulation on 5 mM nitrate after inoculation with Bradyrhizobium japonicum strain YCK213-KFCC-10728. Mutant SS-2 nodulated more than the wild type. Comparison of supernodulation between SS-2 and two nts mutants(nts 1007 and nts 1116) revealed that SS-2 showed the supernodulation character at an earlier growth stage than the two nts mutants. Further studies should be needed to characterize the difference in timing of nodulation between SS-2 and nts mutants.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.31-36
• /
• 2013

Acetylated Cellulose Ether (ACE), cellulose-based amphiphilic polymer with hydrophilic and hydrophobic, was synthesized and investigated in terms of its solubility and wettability for organic solvents and water. Acetyl group was substituted to the cellulose ether in a hydrophilic polymer by esterification. As a result of FT-IR, the peak corresponding to the hydroxyl group decreased and carboxyl acid peak increased with increasing reaction time and temperature, which signified the increase in the degree of acetylation of the ACE. There were similar thermal decomposition behaviors before and after esterification reaction until $800^{\circ}C$ so that the reaction occurred without significant structural changes of cellulose backbones. The solubility parameter of the ACE had a range of 18.5~26.4, and its viscosity and turbidity were controlled according to the solubility parameter of organic solvents. The ACE showed the hydrophilicity because the contact angle of the ACE was higher than the cellulose ether. These results confirmed that the ACE had the hydrophobicity and hydrophilicity due to the ether which was glucosidic bonding between the glucose units and un-reacted hydroxyl functional groups in the ACE.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.25-32
• /
• 2014

The purpose of this research is to develop a process and a system to collect, purify and reuse the residual quantity of trimethylgallium, used as a raw material, upon GaN epitaxial growth for LED from a metal organic chemical vapor deposition(MOCVD) equipment. This research reviews whether TMGa collected from the process can be used through a chemical and structural characteristics evaluation. As a result of analyzing the purity using ICP-MS and ICP-AES, 7N high purity (99.99999%) of TMGa was obtained. According to checking the structural change of TMGa through NMR analysis, TMGa having pure $(CH_3)_3Ga$ structure was obtained without structural change. For reliability review of the collected TMGa, u-GaN was deposited using the MOCVD process and an structural, optical and electrical characteristics evaluation was conducted. As a result, it was found out that the reuse was possible.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1045-1049
• /
• 1995

Thin films of Indium tin oxie (ITO) were prepared by the process of metal organic decomposition. Light transmittance and electrical transport properties of the films were studied with varying the firing temperature and SnO$_2$content. XRD study showed that tin substituted indium in the In$_2$O$_3$lattice. The resistivity had the minimum value of 2.5 ${\times}$ 10$\^$-3/$\Omega$-cm when the content of SnO$_2$was 9wt.%. This value was higher by a factor of 10 than the previously reported results. This difference was attributed to the low mobilities presumably caused by the fine grain size. The transmittance of ITO films in the visible range was over 90%, and the optical energy gap calculated from the absorption edge was in the range of 4.51 and 4.96eV.