• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.407-409
• /
• 2010

The brake system is very important part of the machine operating system of machine. If the machine does not stop during operation, accidents and facility damage, loss of life can cause. This ship is also in the same. In this study, After we had to change the original shape for the braking force improvement of the Mooring winch brake system, we analyzed the braking force and structural stress analysis of the changed Mooring Winch.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.157-165
• /
• 2000

A small hydraulic winch system with an automatic tension control unit was designed to improve the work efficiency of coastal small vessels and the dynamic response characteristics of the winch system operated in the open loop condition was investigated. The inlet and the outlet pressures in hydraulic motor, the torque and the rotating speed of winch drum were measured as a function of time, and the behaviour in autotension mode for stepped load changes was analyzed. The results obtained are summarized as follows : 1. The developed winch system for coastal small vessels will result in better fishing with improved efficiency and lower manpower consumption by remote control of winch system. 2. The rotating delay times of winch drum for on/off operations of solenoid valve were 0.09 see at CW mode and 0.04 sec at CCW mode, respectively. After the solenoid valve was controlled, response characteristics were unstable slightly but showed good tracking behaviour over short time. 3. The driving torque of winch system in autotension mode was kept almost constant of 55.9 kgf·m, and 11.1 then the rotating speed of winch drum was kept almost constant of 5.1 rpm in the larger torque than 55.9 kgf·m and 11.1 rpm in the lower torque than that. 4. The 5% settling times in the transient response characteristics of autotension mode under rapid increasing and decreasing conditions of load were 0.12 sec and 0.2 sec, respectively, and then the rotating speeds were 11 rpm and 5.3 rpm, respectively. 5. The tracking behaviour of torque and rotating speed by remote control operation were stable within 0.23 sec at CW mode and 0.37 sec at CCW mode, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.472-482
• /
• 2019

This paper describes the stabilization of underwater TAS winch system Deploy/Recover operation performance. TAS winch installed on the stern of submarine performs to deploy/recover sensor, towing cable and rope tail which is deployed from the stern and separated from submarine itself. Also TAS winch provides transmission path of power to the sensor and data transmitting/receiving path which data are acquired from underwater environment like sound, depth and temperature. At the step of TAS winch evaluation test, sporadic standstill and rotating speed oscillation phenomenon were occurred. Winch motor provides the available torque to deploy/recover TAS and root cause analysis to the winch motor was done to find exact reason to sporadic malfunction. When winch motor was disassembled, eccentricity of rotor, slip-ring and the other composition part for winch motor were found. These might cause magnetic field distortion. To make TAS winch system more stable and block magnetic field distortion, this paper suggests methods to enhance fixing status installed in winch motor. For reliable data acquisition for TAS winch operation, the deploy/recover function of the improved type of TAS winch was verified in LBTS making similar condition with sea status. At the end of stage, improved type of TAS winch was tested on some functions not only deploy/recover function, but sustainability of TAS operation on specific velocity, steering angle of submarine in the sea trial. Improved type of TAS winch was verified in accordance with design requirement. Also, validity of suggested methods were verified by the sea trial.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.220-221
• /
• 2011

세일링 요트의 윈치는 선가의 10% 이상을 차지하는 고부가가치 제품으로 고하중 윈치의 제작을 위한 원천기술의 확보 및 1인 Auto Pilot 시대에 대비한 자동화 기술을 갖춘다면 내수시장은 물론 해외시장의 진출을 통한 발판을 마련할 것으로 예상된다. 산업의 고도화에 따라 자동화의 범주가 해양레저기구에도 확산되고 있으며, 해양레저 활동자의 요구도 기존의 물리적인 성향에서 쉽고 편하게 해양레저 활동을 즐길 수 있는 기구로 변화하는 추세이므로 이를 반영하여 자동제어를 통한 세일의 방향을 조정할 수 있는 윈치 적용 기술의 개발을 위한 연구를 진행하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.181-182
• /
• 2009

In the machinery, the brake system is as important part as machine's working. If the machine doesn't stopped, would be big occident. For the ships, it is important too. Use the windlass winch to stop the voyage and use mooring winch to keep the stop in the port. In this study, improve the braking power divided the brake band and search the optimize portion.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.503-504
• /
• 2011

본 논문에서는 공연이나 영화 촬영에서 사람과 물건을 매달거나 스포츠 중계를 위해 카메라를 매달고서 고속 촬영하는 시스템에 적용되는 윈치 시스템을 소개하고 이때 사용되는 다축 윈치 시스템의 하드웨어 제작 및 제어를 서술한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.47-57
• /
• 2000

This paper contains the design specification and detail design for a seaborne towing winch system. We analyze operating condition of the system and decide the design specification for the towing winch system, and also perform a detail design for the subsystem such as hydraulic winch system, control equipment and power supplier at the full scale development. The performance of designed towing winch is established by load tests and sea trial tests.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.775-780
• /
• 2010

In the machinery, the brake system is as important part as machine's working. The situation of emergency stop, the machine doesn't stopped would be occur big accident. This is common things for all of machinery, also for the ships. There are two kind of mooring devices are existed on the ship. One of them, the windlass winch, is used to anchor. The other, the mooring winch is used to moor the ship in pier use the rope tied to bitt on dock. In case of previously been used mooring winch made of a steel plate, and the bolt which was connect brake band and lining broken. In this study, prevent an accident find the position of stress concentration by finite element analysis program. And removed stress concentration. And search the optimum position of the separation angle to be more efficient.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.211-212
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 임시정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 선박간 해상계류 상태에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 둥의 원천 기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동척 안전성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔녕 윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념 설계를 제안한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.309-315
• /
• 2012

We develpoed auto winch control which will be applied when we want to fix ship or marine structure in the ocean. In this paper, an effort has been made to design and develop a control unit for Winch control purpose. Developed result shows usefulness when it is applied to Han-river floating island.