• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.1-14
• /
• 2011

This paper analyzes the fairness and efficiency of channel sharing when heterogeneous wireless networks that have different transmission power and/or coverage coexist with the contention-based channel access protocol. First, we show that the existing CSMA (carrier sensing multiple access) protocol, that is a prevailing contention-based mechanism, results in significant unfairness of channel access because of (1) the asymmetric capability of carrier sensing and (2) the blindness of binary exponential backoff and link adaptation mechanisms to the interference-driven transmission failures. Next, we derive the feasible region of carrier sensing thresholds that assures spatial reuse and fair channel sharing simultaneously. Moreover, we establish an analytical model for per-system throughput and investigate the effect of contention window size and transmission rate on the fairness and efficiency of channel sharing. Finally, we compare the performance of several approaches for fair channel sharing via simulations under various network configurations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.10-18
• /
• 2007

In this paper, we extend the multiple time scale control framework to window-based congestion control, in particular, TCP. This is performed by interfacing TCP with a large time scale control module which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT. Performance evaluation of multiple time scale TCP is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic. If source traffic is not extended exceeding, when RTT is 450ms, in self similar burst environment, performance gain of TCP-SSC is up to 45% for ${\alpha}$=1.05. However, its is acquired only 20% performance gain for ${\alpha}$=1.95 relatively. Therefore we showed that by TCP-MTS at large time scale into a rate-based feedback congestion control, we are able to improve two times performance significantly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.37-44
• /
• 2009

This paper describes a new tiled display framework called, iTDF (Interactive Tiled Display Framework), that is designed to support rapid construction of the interactive digital 3D contents running on top of the cluster-based tiled display. This framework allows synchronizing the rendering slaves, sharing software's state over the network, the features, such as, launching multiple applications on a cluster-based computers, moving and resizing windows, synchronization of rendering slaves, distributed shared memory, and unified input interface. This paper analyzes the requirements of the framework and describes the design and implementation of the framework. A couple desktop-based applications are ported with the new iTDF and to find out the usefulness and usability of the framework.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1420-1428
• /
• 2017

It is difficult to guarantee the reliability of the algorithm due to the difference of the sampling frequency among the various ECG databases used for the R wave detection in case of applying to different environments. In this study, we propose an optimal threshold setting method for R wave detection according to the sampling frequency of ECG signals. For this purpose, preprocessing process was performed using moving average and the squaring function based the derivative. The optimal value for the peak threshold was then detected according to the sampling frequency by changing the threshold value according to the variation of the signal and the previously detected peak value. The performance of R wave detection is evaluated by using 48 record of MIT-BIH arrhythmia database. When the optimal values of the differential section, window size, and threshold coefficient for the MIT-BIH sampling frequency of 360 Hz were 7, 8, and 6.6, respectively, the R wave detection rate was 99.758%.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.175-183
• /
• 2003

Absorbed dose dosimetry protocols of high energy photon and electron beams, which are widely used and based on an air kerma (or exposure) calibration factors, have somewhat complex formalism and limitations for improving dosimetric accuracy due to the uncertainty of the physical parameters used. Recently, the IAEA and the AAPM published the absorbed dose to water-based dosimetry protocols(IAEA TRS-398 and AAPM TG-51). The dose calibration programs for these two protocols were developed. This program for high energy photon and electron beams was also developed for users to use in a window environment using the Visual C++ language. The formalism and physical parameters of these two protocols were strictly applied to the program. The tables and graphs of the physical data, and the information of ion chambers were numericalized for their incorporation into a database. This program can be useful in developing new dosimetry protocols in Korea.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.226-235
• /
• 1995

An unmanned speed sprayer was developed using a remote control and an inductive cable guidance systems to protect operators and environment from hazardous pesticides. The sprayer consists of a remote control system, an induction system, obstacle detectors, control actuators and an one-chip microcomputer. The sprayer can be operated by the induction guidance and/or remote control. The following summarize characteristics of the developed speed sprayer. 1) Both the remote control and the induction guidance operation were possible with the developed speed sprayer. 2) Sixteen functions of the forwarding, backing, halting, steering, 3-way valve for nozzles and fan operating etc. were utilized on the remote control system. 3) It was concluded that the DTMF method, having less transmitting error, performed better than the FSK method for an agricultural remote controller. A radio station may be necessary. 4) The digital inductive guidance system, consisting of five low-impedance detection coils and a window comparator circuit, performed better than the analog detecting system, guiding route using inductive voltage differential from tow detection coils.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.192-198
• /
• 2007

Due to the development of information telecommunication technology, e-learning industry is rapidly expanding its scope along with its production technology. The recent trend of e-learning program is likely converted from Wmv(Window Media Video) of Microsoft to Flv(Flash video), which has less capacity but better quality than other image file. It has successfully drawn the users attention since Flv can operate at most OS environments and browsers let alone with window and Lenux without extra players and codec setup. However, there is no accurate data on comparative analysis between Wmv and Flv regarding capacity, quality and production time. Therefore, the study shows the comparative data analysis on Wmv and Flv so as to set out production platform up to its idiosyncrasy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.414-419
• /
• 2010

This paper describes the design and performance of a hovering AUV 'NOAH' constructed at Jeju National University. We analyse the dynamic performance of NOAH using simulation program and carry out depth control test at small basin. The main purpose of NOAH is to carry out fundamental tests on its attitude control and position control. Its configuration is similar to general ROV appearance for underwater works and dimension is $0.75m{\times}0.5m{\times}0.5m$. It has 4 thrusters of 450watt for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an ideal environment for developing various algorithm which are needed for developing and advanced hovering AUV.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1393-1401
• /
• 2017

The Linux operating system is expanding to include desktops and servers, as well as mobile devices, automobiles and embedded devices, and is the dominant operating system category because it is freely available and open source software. However, the desktop market is dominated by Microsoft's Windows, and Apple's Mac OS is increasingly dominated by enthusiasts, but Linux's growth is stagnant. An important element to make up for this deficiency is the X Window System. Most Linux distributions still use the traditional X.org server as the X Window System, but it is heavy and slow. To replace it, a new X window system called Wayland emerged. Wayland is small and light enough to fit on an embedded or mobile device, so it can be mounted on the IoT related device as well as on the desktop. With the advent of Wayland, the change in the X window will accelerate the popularization of Linux.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1082-1092
• /
• 1996

The design of distrbuted systems is difficult to achieve as the execution patterns of distrbuted systems are typically more complex than those of non- distributed systems. Thus, research toward the development of design methods for distributed systems is quitely needed. As object-oriented systems and distrbuted systems share similar properties, the combination of these two is somehow natural. In this work, a design of distributed systems is introduced. The goal of the method in this paper is to provide assistance to the process of specifying a formal object- oriented specification from graphical representation specification inputs such as data flow diagrams, state transition diagrams and Petri nets. It addresses the extraction of objects, operations and reationshipsfrom the problem domain with emphasis on the specification of the characteristics of distributed systems. This object identification method is supported by a knowledge base that provides for the automated analysis and reasoning about objects and their relationsships. The final object model is represented in a format which provides a formal mechanism for reprsenting the object information.