• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.227-228
• /
• 2012

본 논문에서는 스위칭 주파수의 구형파 펄스 전압 주입을 이용한 센서리스 제어시 회전자 초기 위치 추정 방법을 제안하였다. 추정된 동기좌표계 d축에 스위칭 주파수의 구형파 펄스 전압을 주입하여 회전자의 위치를 추정하고, 인덕턴스 포화현상을 이용하여 회전자의 극성을 판별하였다. 제안된 방법은 실험을 통하여 그 타당성을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1171-1179
• /
• 2012

In this study, we consider a dynamic positioning system (DPS) design problem that can be extended to many application fields. Toward this end, tracking and positioning control problems are discussed. In particular, we design a tracking control system that incorporates an observer based on the 2-DOF servo system design approach in order to obtain the desired state information. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation (inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator that satisfies the weighted $H_{\infty}$ error bound is introduced. The condition for the existence of the estimator is denoted by a linear matrix inequality (LMI) that yields an optimized solution and the observer gain.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.266-271
• /
• 1989

In eliminating the nonliner charateristics such as piston displacement drift and difference in speeds of the reciprocating motion due to their nonsymetrical structure of single rod cylinder, modelling was carried out by additional outside disturbance, suggest the position control of single rod cylinder servosystem using VSS and compared with PD control of fixed structure system.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.429-431
• /
• 1998

In this paper, the sun-seeker control system that is driven by DC motor is modeled on linear 2nd order time invariant system under some assumptions. For the analysis of output characteristics, theory is developed using digital control methods. Computer simulation and numerical analysis has been performed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.378-385
• /
• 2000

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD , PID control system. but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system having feature for removal disturbrances and tracking function in the target value point. The back propagation algorithm of neural network used for tuning the 2-DOF parameter(${\alpha}$,${\beta}$,${\gamma}$,η). We investigate the 2-DOF PID control system in the position control system and verify the effectiveness of proposal method through the result of computer simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.181-184
• /
• 1993

일반적으로유압 장치를 사용하여 힘, 속도, 그리고 위치 등을 제어하는 경우 그 제어계의 설계, 제어방식의 선택에있어서는 최종 목표치의 정도, 응답성 등의 제어 성능을 고려함과 동시에 공업적으로는 가격, 동력효율 등이 중요한 설계인자로서 고려 되어 져야한다. 제어 방식응 벨브 제어와 펌프 제어 방식으로 크게 나뉘어 질 수 있으나, 벨브 제어방식에 있어서는 유압 서보벨브를 사용하여 출력 기구를 고정도로 직접 구도하는 것이 많으나 동력손실이 큰 편이며, 효율을 개선하기 위하여 압력 보상형 비례 전자 제어 벨브를 이용하는 것도 있으나, 소출력용으로서만 이용가능할 뿐이다. 이에 비하여 가변 용량형 펌프를 이용한 제어방식은 정도, 응답성은 다소 뒤떨어 지지만 효율이 양호하고 대출력 기구에 적용 가능하다는 점에서최근 주목의 대상으로되고 있다. 본 연구에서는 에너지의 효율적인사용이 가능한 전기. 유압 펌프 시스템을 설계하기위하여 먼저 각 신호전달 요소에 대한 동특성 및 정특성 실험을 행하여 시스템의 근사적인 모델링을 행하고 사판의 경사각을 제어함으로써 유압모터의 속도를 제어하는 시스템을 설계하여그 성능을 고찰하고자 한다.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.615-627
• /
• 2021

The Baekildo fault, a dextral strike-slip fault developed in Baekil Island, Goheung-gun, controls the distribution of tuffaceous sandstone and lapilli tuff and shows a complex fracture system around it. In this study, we examined the spatial variation in the geometry and connectivity of the fracture system by using circular sampling and topological analysis based on a detailed fracture trace map. As a result, both intensity and connectivity of the fracture system are higher in tuffaceous sandstone than in lapilli tuff. Furthermore, the degree of the orientation dispersion, intensity, and average length of fracture sets vary depending on the along-strike variation in structural position in the tuffaceous sandstone. Notably, curved fractures abutting the fault at a high angle occur at a fault bend. Based on the detailed observation and analyses of the fracture system, we conclude as follows: (1) the high intensity of the fracture system in the tuffaceous sandstone is caused by the higher content of brittle minerals such as quartz and feldspar. (2) the connectivity of the fracture system gets higher with the increase in the diversity and average length of the fracture sets. Finally, (3) the fault bend with geometric irregularity is interpreted to concentrate and disturb the local stress leading to the curved fractures abutting the fault at a high angle. This contribution will provide important insight into various geologic and structural factors that control the development of fracture systems around faults.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2014

This paper presents a synchronizing adaptive feedforward control for clamping servomechanism of injection molding machines. Based on MBS, virtual design model has been developed for a direct forcing clamping mechanism. A synchronizing controller is designed and combined with adaptive feedforward control to accommodate mismatches between the real plant and the linear plant model used. From tracking control simulations, it is shown that significant reduction in position tracking error is achieved through the use of proposed control scheme.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1614-1619
• /
• 2003

In this study, position and force simultaneous trajectory tracking control system with pneumatic cylinder driving apparatus is proposed. The pneumatic cylinder driving apparatus that consists of two pneumatic cylinders constrained in series and two proportional flow control valves offers a considerable advantage as to non-interaction of the actuators because of the low stiffness of the pneumatic cylinders. The controller applied to the driving system is composed of a non-interaction controller to compensate for interaction of two cylinders and a disturbance observer to reduce the effect of model discrepancy of the driving system in the low frequency range that cannot be suppressed by the non-interaction controller. The experimental results with the proposed control system show that the interacting effects of two cylinders are eliminated remarkably and the proposed control system tracks the given position and force trajectories accurately.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.157-158
• /
• 2014

단상 계통연계형 인버터에서 전류센서를 통한 상전류 측정시 옵셋 오차는 전류센서와 측정 경로상에 위치한 아날로그 소자의 전압 불균형 및 비선형성으로 인하여 발생하게 된다. 또한 데드타임은 전력용 반도체 스위치를 제어하기 위한 PWM 신호 출력시 필연적으로 발생된다. 본 논문에서는 데드타임으로 인하여 왜곡된 상전류에 포함된 옵셋 오차에 의한 영향을 분석하고 동기좌표계 dq축 전류에 포함된 특정 고조파 성분을 제거하기 위하여 PR 제어기를 사용한 알고리즘이 제안되었다. 데드타임 및 옵셋 오차로 인해 발생된 전류맥동 보상을 위한 기준신호로는 동기좌표계 dq축 전류를 사용하였다. 제안된 알고리즘의 타당성을 시뮬레이션과 실험을 통하여 증명하였다.