• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.87-93
• /
• 2010

This paper describes an improved location determination scheme based on the triangulation method calculating a target position. The proposed scheme uses coordinates of intersection points of three circles each generated by measurement of an observer. The target position obtained from the proposed scheme has higher accuracy not only at the vicinity, but also at the periphery of the observation area. The maximum error and the average error with the proposed scheme are reduced by 40.89% and 40.30%, respectively, with respect to conventional methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.135-143
• /
• 2012

This paper suggests the optimal blood distribution center algorithm that satisfies the minimum total transportation cost and within the allowable distribution time $T^*$. Zhang and Yang proposes shifting the location of each point that has less than the average distance of two maximum distance points from each point. But they cannot decide the correct facility location because they miscompute the shortest distance. This algorithm computes the shortest distance $l_{ij}$ from one area to another areas. Then we select the $v_i$ area to thecandidate distribution center location such that $_{max}l_{ij}{\leq}L^*$ and the $v_i$ such that $l_{ij}-L^*$ area that locates in ($v_i,v_k$) and ($v_j,v_l$) from $P_{ij}=v_i,v_k,{\cdots},v_l,v_j$ path and satisfies the $_{max}l_{ij}{\leq}L^*$ condition. Finally, we decide the candidate distribution area that has minimum transportation cost to optimal distribution area.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.2
• /
• pp.84-88
• /
• 2016

AlN single crystals were grown by the PT (Physical vapor transport) method with position-changable induction coil. And the graphite crucible dimensioned ${\Phi}90{\times}H120$ was used on processing. The temperature was $1950{\sim}2050^{\circ}C$ and ambient pressure was 150~1 Torr. And the hot-zone was changed according to times on growing for result comparison. When hot-zone by coil is located below far enough (> 40 mm) from AlN crystal concentration position, the as-grown crystals physical size is better ($300{\mu}m/hr$) than another condition, but the condition-reproducibility was very poor. However the closer the distance between hot-zone and AlN growing posion, the smaller the size of as-grown crystal and the rarer the generation of the crystal nuclear, but the crystal growing condition is stable for quality. The best condition for both growth rate and quality is gained when the starting position of hot-zone coil is about 20 mm distance from growing position. For the best growth condition, the position of hot-zone is very sensitive factor and the further more the condition of speed of coil shift also must control.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.29-36
• /
• 2006

This paper proposes a new algorithm of MS-EIDV (modal sensitivity-effective independence distribution vector) for determining optimal accelerometer locations (OAL) by using the Fisher Information Matrix (FIM) derived from mode-shape sensitivities. Also, the paper provides a reasonable guideline for selecting OAL which can reflect dynamic responses of a structure effectively. Since OAL should be determined with known values of structural parameters but since the parameters can be estimated by applying an inverse method such as SI (system identification) using measured response, the paper proposes a statistical method to overcome the paradox by considering the error bound of the structural parameters. To examine the proposed methods, a frequency-domain SI method has been applied. By using the identified results, the minimum necessary number of accelerometers could be selected depending on the number of target measurable modes. Through simulation studies, the results by applying EIDV method directly using the information of mode shapes were compared with those by applying the proposed MS-EIDV.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.69-95
• /
• 2009

This paper examines the motives for location decisions of startups and dynamics of cluster growth. Because the location decision is intrinsically strategic choice by entrepreneurs, it is an interplay of three critical forces; cost-benefit of the choice, R&D ability of new entrants, and R&D capability of incumbents in clusters. The effect of knowledge spillovers influences the cluster growth like a double-edge sword; both a positive effect of technology learning and a negative effect of knowledge de-learning. Using data on 710 bio-tech venture firms in Korea, this paper tests the hypotheses about the factors influencing the growth of the cluster. The empirical analyses suggested that early entrepreneurial activity in the clustered regions were important, however other factors such as the organizational legacy, internal dynamics inside a cluster, and the existence of cooperation norm in the cluster, affected long term viability of the cluster.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.303-310
• /
• 2002

Nowadays, the combined land navigation system using GPS(Global Positioning System) and DR(Deduced Reckoning), etc. has been used. Although GPS is popular with the land navigation system, this is not useful for the kinematic positioning of the vehicles in the urban canyon because of its few satellites. Thus, this study deals with the kinematic positioning of the vehicles with the combined GPS/GLONASS(GLObal Navigation Satellite System) to compliment the drawbacks of GPS. So the kinematic positioning of the vehicles can be performed constantly by the combined GPS/GLONASS based on the high acquisition rate of data with the help of GLONASS despite of many obstacles and few satellites tracked in the test sites. Consequently, the combined GPS/GLONASS can be applicable to the control of traffic flow and the effective management of read system.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.63-73
• /
• 1993

Ag+ 이온이 부분적으로 치환된 3가지 제올라이트 A(Ag4Na8-A, Ag6Na6-A 및 Ag8Na4-A)를 완전히 탈수한 후 280℃에서 24시간동안 약 0.1 Torr의 Cs중기로 처리하 였다. 이들의 결정구조는 22(1)℃ 노에서 입방공간군 Pm3m (단위세포상수 a가 각각 12.321(3) A, 12.295(1) A 및 12.380(7) A임)을 사용하여 단결정 X-선회절법으로 해석 하였다. 이들 세가지 구조에서 Cs+이온은 각각 서로 다른 4개의 결정학적 위치에서 발견되었다. 단위세포당 3개의 Cs+이온은 8-링 중심에 위치하고, 약 6.9-7.3개의 Cs+이온 은 큰 동공의 6-링과 마주보는 위치에 있는 3회 회전축상에서 발견되었다. 그리고 약 2.17-2.74개의 Cs+이온은 소다 라이트 동공내에서 발견되며 약 0.5-1.0개의 Cs+'이온은 4링과 마주보는 곳에 위치한다. 또한 이들 구조에서 단위세포당 각각 1.88(5),2.30(3) 및 5.28(10)개의 Ag종이 존재하며 이들은 큰동공의 중심에서 헥사실버 클러스트를 형성한다. 8-링위치가 Cs+이온으로 모두 차있어서 Ag0가 골조밖으로 이동하는 것을 막을 수 있다. 각각의 헥사실버 클러스터는 서로 다른 좌표에 위치하는 14개의 Cs+이온에 의해 안정화된다. 이들 구조에서 발견되는 약 12.35-13.49개의 Cs+이온들은 Cso의 흡착이 일어나 제올라이트 기본 골 격에 있는 음이온 전하와 균형을 맞출 수 있는 12개의 Cs+ 이온 이상의 이온 또는 원자로 존재하고 있다. Cs+의 배열 은 다음과 같은 두 가지 배열로 쉽게 설명할 수 있다. 일부는 2개의 Cs+이온이 소다이트 동공내에 있는 6-링과 마주보는 곳에 위치하고 큰동공내에는 6개의 Cs+이온이 6링 근처에 위치하며 1개는 4-링 근처에 위치한다. 그 나머지는 소다라이트 동공내에 위치하는 3개의 Cs+이온과 한변의 길이를 3.52 A로 갖는 삼각형을 형성한 후 6-링을 통 하여 큰 동공 내에 위치한 3개의 Cs원자와 결합하게 되므로 3m (C3v)의 대칭구조를 갖는 (CS6)4+클러스터를 형성한다. 그 밖의 5개 Cs+이온은 비어있는 큰동공의 6-링에 위치한다.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.559-569
• /
• 2009

Due to environmental, economical and the other limitations, it has been more difficult to construct new large hydraulic structure such as dam. For this reason, it has been tried to use small hydraulic structure such as washland as alternative of hydraulic facility. Because the flood control effect of small hydraulic structure are affected by runoff volume, hydrograph, storage capacity and weir crest elevation, and design frequency must be predetermined for the design of the hydraulic structure. Multiple washlands will be required to satisfy enough peak reduction effect so that considering washlands as a network, rather than individually, are critical to analysis of flood reduction effect. In this study, new index for determination of optimal location for washlands is presented and the existing model for this determination is modified by adopting the new index. Developed new model is applied to Ansung river basin for examination and the new model shows its' applicability as a decision making criteria for the determination of optimal location for washlands.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.145-150
• /
• 2009

Because it is difficult to install new large hydraulic structure, washland is considered as alternatives of hydraulic facility. As flood reduction effect of washland is dependent on flood, hydrograph, capacity of washland and spillway height, applying adequate spillway height is very important to maximize flood reduction effect of washland. In this study, effect of variation of spillway height on flood reduction effect of washlands is analyzed. The existing model developed to make decision for optimal location of washland using flood reduction effect as evaluation function and location of washland as decision variable was revised for this purpose. The spillway height of washland is added as decision variable and revised model finally give optimal location and spillway height of washland as result. The developed model has been applied to the Ansung River basin and application result was compared with that of existing model. The application result shows that developed model can give more efficient result than existing model.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.21-26
• /
• 2006

기존 해상구조물의 위치결정은 조류나 바람, 안개, 비, 눈, 일조시간 등의 기상조건으로 인한 장해요인과 지상 기준점 좌표값을 쉽게 이용하기가 곤란하기 때문에 정확한 위치결정을 할 수 있는 기법이 필요하다. 기존의 측량방법은 해상의 가설측량대 설치 및 철거에 따른 시간과 예산이 소요되고, 기상조건에 따라 시준이 불가능하여 작업 중단과 공기가 지연되며, 시준오차와 자료 오기오차 등이 발생하는 문제점을 가지고 있다. 본 연구에서는 GPS측량방법을 이용하여 현장 Calibration을 수행하여 위치정확도를 향상시키고, 해상에서의 기상조건에 따른 문제점과 상시 Monitoring에 의한 자동제어시스템을 개발함으로써 측량 정확도 향상과 해상구조물 공사기간 단축, 공사비 절감 등의 효과를 가져 올 수 있도록 하였다.