• The Transactions of the Korean Institute of Power Electronics
• /
• 제7권3호
• /
• pp.253-261
• /
• 2002

This paper presents an implementation of position control system of Switched Reluctance Motor (SRM) using digital hysteresis controller by TMS320F740 DSP. Although SRM possess several advantages including simple structure and high efficiency, but the control thrive system using power semiconductor device is required to drive this motor. The control drive system increases overall system cost. To overcome this problem and increase the application of SRM, it is needed to develope the servo dave system of SRM. So, the position control system of 1 Hp SRM is developed and evacuated by adaptive switching angle control. The position/speed response characteristics and voltage/current waveforms are presented to prove the capability of SRM for a servo drive application. Moreover, digital hysteresis current controller is developed and evaluated by experimental testing for the purpose of system developmental cost reduction.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제22권1호
• /
• pp.36-41
• /
• 2012

This paper presents torque control of DC motor using the velocity profile based acceleration/deceleration controller for automatic guided vehicles (AGVs). This technique has some advantage; to reduce the damage of motors and to extend the life time of motors. First, we generate velocity profiles for three cases and design the state feedback controller using the generated velocity profile as a reference. The state feedback controller has servo system for solving regulation problem. For the verification, we apply the proposed method to control a cart position and shows some simulation result.

• Journal of IKEEE
• /
• 제2권2호
• /
• pp.166-172
• /
• 1998

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia and high efficiency. However, position sensor is essential in SRM in order to synchronize the phase excitation to the rotor Position. The Position sensors increase the cost of drive system and tend to reduce system reliability. This paper investigates the speed control of sensorless SRM in which the Phase current and change rate are utilized in position decision, and the period of dwell angle is variable for speed control. The proposed system consists of Position decision circuit, speed controller, digital logic commutator, switching angle controller and inverter The performances in the proposed system are verified through the experiment.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.917-920
• /
• 2003

자기 부유기는 전자력을 이용해서 자성 재료를 공중에 떠있게 할 수 있는 장치이다. 자기 부유기는 근본적으로 비선형이며 불안정한 시스템으로서 제어에 많은 어려움이 따른다. 본 논문에서는 비선형 시스템을 국부적으로 선형화해서 모델링하고, 위치가변제어를 수행할 수 있도록 비례미분 위치제어기를 설계하였다. 시뮬레이션과 DSP를 이용한 자기부유기 제작 및 실험으로 위치제어 응답성능을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제7권5호
• /
• pp.51-59
• /
• 1997

In this paper, we perform the position control of a DC servo motor using fuzzy neural controller. We use the Fuzzy controller for the position control, because the Fuzzy controller is designed simpler than other intelligent controller, but it is difficult to design for the triangle membership function format. Therefore we solve the problem using the BP learning method of neural network. The proposed Fuzzy neural network controller has been applied to the position control of various virtual plants. And the DC servo motor position control using the fuzzy neural network controller is performed as a real time experiment.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제23권6호
• /
• pp.511-518
• /
• 2013

To implement an automatic picking system (APS) in distribution center with high precision and high dynamics, this paper presents a design of a linear induction motor (LIM) drive and robust position controller based on integral variable structure control (IVSC) scheme. The force disturbance as well as the mechanical parameter variation such as the mass and friction coefficient gives a direct influence on the position control performance of APS. To guarantee a robust control performance in the presence of such uncertainty, a robust position controller is designed. A Simulink library is developed for the LIM model from the state equation. Through this model and comparative simulation based on Matlab - Simulink, it is proved that the proposed scheme has a robust control nature and is most suitable for APS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제10권7호
• /
• pp.1520-1525
• /
• 2009

In this paper, we study and simulate the suggested position control system using GPS and USN to replace the existing control system of a crane. For the correct approach, the position control system of a crane is divided into the control system of the ground station and the mobile station The hardware is comprised of GPS receiving module to receive the position control data of a crane from GPS satellites, bluetooth communication module for the data communication between the ground station and the mobile station, supersonic sensor module for a precise position control of a crane, motor to replace a crane roller, embedded MCU(ATmega128L) and so on. In here, an embedded MCU controls GPS receiving module, bluetooth communication module and supersonic sensor module. The Software is comprised of three programs. Three programs are the program to filter GGA output part in a receiving data of GPS receiving module, the driving program for supersonic sensor module, the digital map program to monitor a crane location. From the simulation results, it is demonstrated that the proposed system has the capability of crane position control with 1cm precision.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제12권12호
• /
• pp.2365-2370
• /
• 2008

In this paper, applications of wavelet neural network controller to position control of nonlinear system are considered. Wavelet neural network is used in the objectives which improve the efficiency of LQR controllers. It is possible to make unstable nonlinear systems stable by using LQR(Linear Quadratic Regulator) technique. And, in order to be adapted to disturbance effectively in this system it uses wavelet neural network controller. Applying this method to the position control of nonlinear system, its usefulness is verified from the results of experiment.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.137-140
• /
• 2003

2관성 공진계는 전동기와 부하 사이에 탄성이 있는 동력 전달 체계를 포함하는 시스템으로 고속 제어시 진동이 발생된다. 이와 같은 2관성 공진계에 대해 궁극적인 출력이 되는 부하의 위치 및 속도는 측정하기가 어렵다. 이에 기존의 연구들은 추정기등을 이용하여 부하의 속도를 추정하여 이를 제어에 활용하는 방식으로 구성되어진다. 그러나 이와 같이 추정기를 사용하기 위해서는 정확한 모델이 필요하다. 본 논문에서는 다소 부정확 모델에 대해서도 매우 정교한 제어 성능을 갖는 반복 학습 제어를 이용하여 2관성 공진계의 위치 제어를 시도하고자 한다. 제시된 방법은 2관성 공진계에 대한 모델링이 정확하지 않더라도 진동 없이 정확한 위치 제어가 가능하다.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제14권6호
• /
• pp.693-698
• /
• 2004

In this paper, an iterative learning control method is applied to suppress a vibration of a 2-mass system which has a flexible coupling between a load and a motor. More specifically, conditions for the load speed without vibration are derived based on the steady-state condition. And the desired motor position trajectory is synthesized based on the relation between the load and motor speed. Finally, a PD-type iterative learning control law is applied for the desired motor position trajectory. Since the learning law applied for the desired trajectory guarantees the perfect tracking performance, the resulting load speed shows no vibration even when there exist model uncertainties. A modification to the learning law is also Presented to suppress undesired effects of an initial position error, The simulation results show the effectiveness of the proposed learning method.