• Spatial Information Research
• /
• v.7 no.1
• /
• pp.119-131
• /
• 1999

Various digital topographic maps including 1:1,000 and 1:5,000 have been produced for years and these digital maps are expected to serve a wide range of purposes. Most previous research about measuring positional accuracy for digital topographic maps depends int a method that acquires sample points from the tested map and compares to the corresponding known true locations using some statistics. Recently, a simple method for measuring positional accuracy for linear features is introduced but it has substantial problems applying to the spatial features such as roads, railroads, streams represented with double lines on the recently produced 1:1,000 and 1:5,000 digital topographic maps. This study develops and implements an effective method that measures road objects represented in the 1:5,000 digital topographic maps using a conventional GIS software. We also apply this method to a small study area located in Kangnam Gu, Seoul and illustrate the usefulness of this method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.319-326
• /
• 1998

In this study, it was tried to experimentally judge the positional accuracy of digital maps, which are being constructed with a vast of investment and national endeavor. Using GPS and Total Station, field surveying to assess the positional accuracy of 1：5,000 digital maps was conducted. According to these results, the digital maps were compared to the real field test. And in order to check the positional accuracy standard of digital maps, theoretical positional accuracy of 1：5,000 digital maps are compared with that from field test data to propose research activities for hereafter positional accuracy standard of digital map.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.390-394
• /
• 2007

시간과 장소에 구애받지 않고 실시간으로 정보를 전달받을 수 있는 유비쿼터스 시대가 도래함에 있어서 실시간으로 움직이는 대상물의 위치를 알아내는 기술은 가장 근본적이며 필수적인 요소라 할 수 있다. 추측항법(Dead Reckoning)은 움직이는 대상물에 외부의 도움 없이 자신의 방향각과 가속도, 시간을 관측할 수 있는 관성항법장치(Inertial Navigation System)를 장착하여 이전의 위치 정보를 바탕으로 현재의 위치를 관측하는 방법이다. 또한 RFID(Radio Frequency IDentification)는 이러한 유비쿼터스 근거리무선통신의 핵심 기술로서 본 논문에서는 RFID에 기반한 위치 결정 시스템에 실시간 변화하는 대상물의 위치를 예측하기 위해 추측항법과 칼만필터(Kalman-filter)의 개념을 적용시켰다. 또한 RMSE(Root Mean Square Error)값을 통해 칼만필터의 적용에 따른 정확도의 향상과 각 디자인 요소들의 변화에 따라 위치의 정확도가 어떠한 변화를 갖는지를 분석하였다. 시뮬레이션 결과 칼만필터를 적용했을 때 이전보다 RMSE값이 현저히 작아지는 결과를 통해 위치의 정확도가 크게 향상되는 것을 확인하였다. 또한 RFID의 탐지 범위는 정확도에 큰 영향을 미칠 수 있는 주된 요소가 아니며, RFID 탐지 범위의 표준편차가 작을수록 위치 정확도는 높아지고, RFID 태그의 탐지 확률이 높을수록 RMSE 값의 변동이 작은 안정된 시스템을 갖으며 위치의 정확도 또한 높아진다는 것을 확인하였다.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.57-64
• /
• 2021

In the study, to minimize the error on guided control of the KV (Kill Vehicle) and to secure the hit-to-kill performance, a position accuracy inspection for the DACS (Divert and Attitude Control System) actuation system was proposed. The accuracy performance of the DACS actuation system is one of the most important factors in the interception of ballistic missiles. In order to validate actuation control accuracy of DACS system, an inspection item was set for position accuracy, and the inspection system was designed for DACS pintle. To measure the absolute position value of the DACS pintle, an external measurement system was developed using laser displacement sensors. The inspection system was designed so that it can be compared with the actuation command in real time. The proposed position accuracy inspection system can be inspected not only in a DACS system but also in missile system level. The position accuracy inspection was performed using the designed inspection system, and analysis of the inspection result.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.4 s.22
• /
• pp.51-60
• /
• 2002

As the use of GIS becomes more widespread, the quality and source of data is becoming more of a concern among users. But accuracy is a component of quality, and the positional accuracy is a component of total accuracy. If only we consider the positional accuracy, simultaneously collecting technology of location and attribute information, whether it be manually, using conventional surveying method, GPS, or remote sensing, is a practical way of insuring that location and attribute information are correctly correlated. This study analyse the positional accuracy from a view-point of user and supplier, which is the considerations that can ensure quality level and continuously maintain the road and underground utility information. The positional accuracy of road and underground utility information are considered as two categories - expected accuracy of data collection procedure, required accuracy of data usage process. And the project manager must consider the cost/benefit view of data generation in order to determine the surveying method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.151-162
• /
• 1991

This study aims to improve the positioning accuracy by analizing the accuracys of three dimensional positioning according to various data types and preprocessing levels of SPOT imagery and the acquisition method for ground control points, and to develop the three dimensional positioning algorithm and program. In this study, the optimum polynomials of exterior orientation parameters according to each preprocessing levels (level 1B; 15 variables, level 1AP, 1A; 12 variables) are determined. As a results, the accuracy of level lAP is the best in the results of analysis about the accuracy of positioning, but level 1A which is digital image data form also shows similar positioning accuracy. Also, in level 1A image which have different acquisition method for ground control points, the accuracy of three dimensional positioning is highly improved. But, in case of low accuracy of ground control points, only introduction of additional parameters does not effect to the improvement of accuracy. Therefore simultaneous adjustment including blunder detection method should be adopted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1083-1094
• /
• 2012

Commercialized location estimation System with high accuracy is widely used for various services. However, if the systems aren't completely installed in an indoor, location estimation accuracy tend to be very poor. In this paper, indoor location estimation algorithm to improve the accuracy of object location, by correcting the location information obtained from a system that does not fully install, is proposed. In this paper, UWB-based Ubisense system that provides high position accuracy in an indoor environment was utilized. In conclusion, this paper was able to improve the positioning accuracy, by correcting that information about the location of the measured object in position estimation system.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.893-906
• /
• 2020

This paper reports on the analysis of the location accuracy of a precision image generation system manufactured for CAS 500. The planned launch date of the CAS 500 is 2021, and since it has not yet been launched, the analysis was performed using KOMPSAT-3A satellite images having similar specifications to the CAS 500. In this paper, we have checked the geolocation accuracy of initial sensor model, the model point geolocation accuracy of the precise sensor model, the geolocation accuracy of the precise sensor model using the check point, and the geolocation accuracy of the precise orthoimage using 30 images of the Korean Peninsula. In this study, the target geolocation accuracy is to have an RMSE within 2 pixels when an accurate ground control point is secured. As a result, it was confirmed that the geolocation accuracy of the precision sensor model using the checkpoint was about 1.85 pixels in South Korea and about 2.04 pixels in North Korea, and the geolocation accuracy of the precise orthoimage was about 1.15 m in South Korea and about 3.23 m in North Korea. Overall, it was confirmed that the accuracy of North Korea was low compared to that of South Korea, and this was confirmed to have affected the measured accuracy because the GCP (Ground Control Point) quality of the North Korea images was poor compared to that of South Korea. In addition, it was confirmed that the accuracy of the precision orthoimage was slightly lower than that of precision sensor medel, especially in North Korea. It was judged that this occurred from the error of the DTM (Digital Terrain Model) used for orthogonal correction. In addition to the causes suggested by this paper, additional studies should be conducted on factors that may affect the position accuracy.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.32-40
• /
• 2019

Indoor location estimation studies are needed in various fields. The method of estimating the indoor position can be divided into a method using hardware and a method using no hardware. The use of hardware is more accurate, but has the disadvantage of hardware installation costs. Conversely, the non-hardware method is not costly, but it is less accurate. To estimate the location for AR game, you need to get the solution of the Perspective-N-Point (PnP). To obtain the PnP problem, we need three-dimensional coordinates of the space in which we want to estimate the position and images taken in that space. The position can be estimated through six pairs of two-dimensional coordinates matching the three-dimensional coordinates. To further increase the accuracy of the solution, we proposed the use of an additional non-coplanarity degree to determine which points would increase accuracy. As the non-coplanarity degree increases, the accuracy of the position estimation becomes higher. The advantage of the proposed method is that it can be applied to all existing location estimation methods and that it has higher accuracy than hardware estimation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.173-178
• /
• 2008

확률도시위치는 주로 도시적 해석을 통한 연최대홍수량 또는 연최대강우량의 초과확률의 추정치 산정에 사용되며 빈도해석을 통해 선정된 적정 확률분포형과 표본자료의 개략적인 적합도를 도시적으로 파악할 수 있도록 해주기 때문에 오래 전부터 널리 이용되어 왔다. 본 연구에서는 Gumbel 분포에 적합한 도시위치공식을 새롭게 추정하기 위해 Gumbel 분포의 order statistic과 확률가중모멘트를 이용하여 다양한 표본크기에 대한 도시위치공식의 기본식을 유도하였고, 최적화 기법 중 하나인 유전자 알고리즘을 이용하여 유도된 도시위치공식의 매개변수를 추정하였다. 또한 본 연구에서 추정된 도시위치공식과 기존에 널리 사용되고 있는 도시 치공식의 정확도를 비교하기 위해 reduced variate 간의 오차를 계산하여 비교 검토하였다. 그 결과, 금회 추정된 도시위치공식은 높은 순위에서는 기존의 도시위치공식에 비해 더 정확도가 높은 것으로 나타났고, 표본크기에 대한 순위를 모두 고려할 경우에는 기존의 도시위치공식에 비해 정확도가 높은 것으로 나타나 Gumbel 분포에 대해서 높은 정확도를 보이는 것으로 나타났다.