• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.165-174
• /
• 2010

In this paper, a two-phase structural health monitoring system using acceleration response signatures are presented to firstly alarm the change in structural condition and to secondly detect the changed location for full-scale concrete girder bridges. Firstly, Mihocheon Bridge which is a two-span continuous concrete girder bridge is selected as the target structure. The dynamic response features of Mihocheon Bridge are extracted by forced vibration test using bowling ball. Secondly, the damage alarming occurrence and the damage localization techniques are selected to design two-phase structural health monitoring system for Mihocheon Bridge. As the damage alarming techniques, auto-regressive model using time-domain signatures, correlation coefficient of frequency response function and frequency response ratio assurance criterion are selected. As the damage localization technique, modal strain energy-based damage index method is selected. Finally, the feasibility of two-phase structural health monitoring systems is evaluated from static loading tests using a dump truck.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.995-1002
• /
• 2022

Global Navigation Satellite System(GNSS) is a convenient system that acquires position and time information of a receiver if only satellite signals can be received anywhere in the world. However navigation signals include errors and a position error occurs according to the reception state of the signal. Also, a position error is affected by the geometric arrangement of the satellites. Therefore a receiver position performance varies by the number and status of visible satellites The condition of satellite signals is not good when the satellite rises or sets and the position change of receiver occurs when the signal is blocked by an obstacle such as a building in the urban area. In this paper, we proposed methods to improve the GNSS performance by using pseudorange correction method estimating the correction amount and the visible satellites selection method. By applying the proposed methods to an environment in which the number of visible satellites changes variously, the performance enhancement was verified.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.137-146
• /
• 2001

Route selection needs the analysis function of GSIS to analyze and manipulate a lot of spatial information efficiently. Therefore, it needs the linkage of system requiring the knowledge and the experience of experts as a method that can estimate each quantitative route for an efficient route selection. In this study, the route selection model through construction and analysis procedure of position information using GSIS were presented, and route selection system linked with expert system was developed. This system is easy to be used and managed for presenting route alignment according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. Using GSIS, the various information required for route selections in database was constructed, the characteristics of subject area by executing three-dimensional terrain analysis was grasped effectively, and the control point through buffering, overlay and location operation was extracted. Three alternative routes between a beginning point and an end point inputted by route selection system were selected. Therefore, the applications of the route selection system are presented by applying this system to the real study area.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.313-315
• /
• 2006

본 연구에서는 실내에서 입력받은 영상의 조명과 크기 변화 등에 강인한 얼굴 검출 기법을 소개한다. 제안된 얼굴 검출 기법은 후보 영역 선정 과정과 얼굴패턴 검출 과정, 얼굴 영역 보정 과정으로 이루어진다. 후보 영역 선정 과정에서는 조명보정과 색상 필터, 움직임 필터를 이용하여 얼굴패턴의 후보 영역을 선정한다. 얼굴패턴 검출 과정에서는 CNN을 이용하여 특징을 추출하고, WFMM 신경망을 이용하여 얼굴 패턴을 검증한다. 얼굴 영역 보정 과정은 형태학적 연산 등의 영상 처리를 이용하여 눈 영역과 입술 영역의 위치를 판별한 후 최종적인 얼굴 영역을 결정한다.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.270-278
• /
• 2008

This study : An analysis of position accuracy of topography according to using LiDAR data, aerial photo and digital map for a study area was conducted. The study area was selected in Hadan area, Sahagu, Busan aerial LiDAR data and aerial photo in the scales of 1:20,000, which are high tech surveying ways were used. The final digital orthoimage according to orientation process for each image and image resampling was producted. Using it, a checkpoint was chosen, information about the checkpoints selected was extracted, a coordinate of Horizontal Position through the screen digitizing was also extracted. Both the coordinates of LiDAR data and aerial photo using digital map in the scales of 1:20,000 announced to the public from NGII(National Geographic Information Institute) were gradually compared and analyzed. Based on the digital map, as a result of being both compared and analyzed, it has shown to us that horizontal position of aerial photo is more accurate than that of aerial LiDAR surveying (RMSE-building x:24cm, y:26cm).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.114-114
• /
• 2022

딥러닝의 학습 및 예측성능을 개선하기 위해서는 딥러닝 기법 내 연산과정의 개선과 함께 학습 및 예측에 사용되는 데이터의 전처리 과정이 중요하다. 본 연구에서는 딥러닝의 성능을 개량하기 위해 제안된 메타휴리스틱 최적화 알고리즘-딥러닝 결합모형과 데이터 전처리 기법을 통해 댐의 수위를 예측하였다. 수위예측을 위해 Multi-Layer Perceptron(MLP), 메타휴리스틱 최적화 알고리즘인 Harmony Search(HS)와 딥러닝을 결합한 MLP using a HS(MLPHS) 및 Exponential Bandwidth Harmony Search with Centralized Global Search(EBHS-CGS)와 딥러닝을 결합한MLP using a EBHS-CGS(MLPEBHS)를 통해 댐의 수위를 예측하였다. 메타휴리스틱 최적화 알고리즘-딥러닝 결합모형의 학습 및 예측성능을 개선하기 위해 학습 및 예측을 위한 자료를 기반으로 데이터 전처리기법을 적용하였다. 적용된 데이터 전처리 기법은 정규화, 수위구간별 사상(Event)분리 및 수위 변동에 대한 자료의 구분이다. 수위예측을 위한 대상유역은 금강유역에 위치한 대청댐으로 선정하였다. 대청댐의 수위예측을 위해 대청댐 상류에 위치하는 수위관측소 3개소를 선정하여 수위자료를 취득하였다. 각 수위관측소에서 취득한 수위자료를 입력자료로 설정하였으며, 대청댐의 수위자료를 출력자료로 설정하여 메타휴리스틱 최적화 알고리즘-딥러닝 모형의 학습을 진행하였다. 각 수위관측소 및 대청댐에서 취득한 수위자료는 2010년부터 2020년까지 총 11년의 일 단위 수위자료이며, 2010년부터 2019년까지의 자료를 학습자료로 사용하였으며, 2020년의 자료를 예측 및 검증자료로 사용하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2001.10a
• /
• pp.173-177
• /
• 2001

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.567-568
• /
• 2011

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1632-1634
• /
• 2010

고성능 재구성형 어레이 아키텍처는 애플리케이션에 내재된 병렬성을 충분히 활용하도록 풍부한 하드웨어 리소스로 구성되어 있다. 이러한 하드웨어 리소스는 소프트웨어 파이프라이닝 기반 코드할당 기법을 통하여 사용된다. 이러한 코드할당 기법은 기존의 소프트웨어 파이프라이닝 기법에 FPGA 에서의 라우팅 & 위치선정기법이 연결된 형식으로 구성된다. 이러한 기존의 연구들은 데이터 흐름 (data flow)을 단순한 형태로 가정하여 개발되었다. 따라서 루프 코드 펼침 (loop unrolling)에 따라서 발생되는 데이터 복사에 의한 흐름 (copy flow)은 코드 매핑할 때 고려하지 않기 때문에 소프트웨어 파이프라이닝 적용시 네트웍 리소스의 중복사용으로 인한 데이터 충돌문제(data congestion)로 Minimum Initiation Interval (MII)증가에 따르는 성능 저하가 발생할 수 있다. 본 연구에서는 다양한 데이터 복사 흐름까지 고려하도록 데이터 의존도 그래프 (Data Dependence Graph, DDG)를 확장하여 스케쥴링 단계에서 데이터 충돌 지연에 의한 MII 증가를 방지하여 최적의 시스템 성능을 얻도록 코드 할당 기법을 개발하였다.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.8-14
• /
• 2008

In this paper, I have presented a new approach which can track moving objects in unknown environments. This scheme is important in providing a computationally feasible alternative to complete enumeration of JPDA which is intractable. I have proved that given an artificial measurement and track's configuration, proposed scheme converges to a proper plot in a finite number of iterations. In this light, even if the performance is enhanced by using the relaxation, I also note that the difficulty in tuning the parameters of the relaxation scheme is critical aspect of this suggestion.