• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.2
• /
• pp.15-25
• /
• 2017

The objective of this study is to investigate the value of rock Korean chessboards as a corroborative evidence that go, the play culture naturalized from the past, was also performed under the pavilion of the mountain stream, and the old tree. This study executes analysis on the location and form of rock Korean chessboards, physical environment such as the position of surrounding space, the origin of the nomination, surrounding landscape, and historical significance through the research analysis of comprehensive present conditions, and highlights the position types, landscape significance, and preservation value of the rock Korean chessboards of Korea from diverse angles. The result is as follows. 1. The styles of Korean chess (將棋), which identically propagated in the representative countries of Eastern culture, Korea, China, and Japan, and modified in accordance with each country's idea and native tendency, were organized, and confirmed the Korean Go as a naturalized native culture. 2. Out of 15 rock Korean chessboards confirmed through this study, 9 (60%) were categorized as rock Korean chessboards, and 6 (40%) were categorized as stone Korean chessboards. Also, the average size of the go boards were $51cm{\times}46.6cm$, which demonstrated not much difference with present day universal go boards. The Pearson correlation coefficient between bed rock and go boards were 0.647, demonstrating a relatively high correlation; the research subject of rock go boards have been constructed in consideration of rationality, convenience, and the value of promotion of public welfare. 3. The results of analysis of location patterns of rock Korean chessboard showed that villages (87%), mooring (73%), plains (60%) and mountains (47%). The most frequent location pattern is mooring and village, and these two factors played the most important role in determining the location of the rock Korean chessboard.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.579-591
• /
• 2013

This study was carried out to investigate the actual vegetation, the structure of plant community, and ecological succession sere of forest ecosystem in temperate northern climate zone, Daegwallyeong Ranch, Gangwon-do (Province) and to offer the basic data for planning of the forest managemant. As a result of analysis of actual vegetation, vegetation types divided into 56types and the area of survey site was $19,397,361m^2$. The ratio of vegetation type dominated by Quercus mongolica forest was 39.1%, primary grassland was 24.7%, Quercus mongolica-Deciduous broad-leaved forest was 11.3%. Twenty eight plots (size is $20m{\times}20m$) were set up and the results analyzed by DCA which in one of the ordination technique showed that the plant communities were divided into six groups which area community I (Pinus densiflora-Quercus mongolica community), community II (Quercus mongolica-Pinus densiflora community), community III (Quercus mongolica community), community IV (Quercus mongolica-Deciduous broad-leaved community), community V (Deciduous broad-leaved community), community VI (Sorbus alnifolia community). The age of community Iwas ranged from 57 to 62 years old, that of community IIwas ranged from 41 to 77 years old, community III was ranged from 47 to 108 years old, community IV was ranged from 47 to 82 years old, community V was 47 years old, community VI was 55 years old, thus we supposed that the age of the study site is about from 41 to 108 years old. The Ecological succession is predicted from Pinus densiflora community to Quercus mongolica community and Deciduous broad-leaved were distributed in the center of the valley in Daegwallyeong Ranch. According to the index of Shannon's diversity (unit: $400m^2$), community IV was ranged from 0.8203 to 1.1439, community III was ranged from 0.8019 to 1.1375, community V was 1.0993, community I was ranged from 0.9475 to 1.0797, community II was ranged from 0.6896 to 1.0324, community VI was 0.9909.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.357-368
• /
• 2002

In this study we have tried to explain the barrel-shaped morphology for young supernova remnants considering the dynamical effects of the ejecta. We consider the magnetic field amplification resulting from the Rayleigh-Taylor instability near the contact discontinuity. We can generate the synthetic radio image assuming the cosmic-ray pressure and calculate the azimuthal intensity ratio (A) to enable a quantitative comparison with observations. The postshock magnetic field are amplified by shearing, stretching, and compressing at the R-T finger boundary. The evolution of the instability strongly depends on the deceleration of the ejecta and the evolutionary stage of the remnant. the strength of the magnetic field increases in the initial phase and decreases after the reverse shock passes the constant density region of the ejecta. However, some memory of the earlier phases of amplification is retained in the interior even when the outer regions turn into a blast wave. The ratio of the averaged magnetic field strength at the equator to the one at the pole in the turbulent region can amount to 7.5 at the peak. The magnetic field amplification can make the large azimuthal intensity ratio (A=15). The magnitude of the amplification is sensitive to numerical resolution. This mens the magnetic field amplification can explain the barrel-shaped morphology of young supernova remnant without the dependence of the efficiency of the cosmic-ray acceleration on the magnetic field configuration. In order for this mechanism to be effective, the surrounding magnetic field must be well-ordered. The small number of barrel-shaped remnants may indicate that this condition rarely occurs.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.187-196
• /
• 1996

Underlying malocclusions and dentofacial deformities are often related to variations in the craniofacial development. Type I and type II collagens are considered the major collagens of bone and cartilage respectively. Monitoring the patterns of those protein expressions during development will Provide a basis for the understanding of normal and abnormal growths. This study was undertaken to investigate the morphogenetic changes and the expression patterns of type I and II collagen proteins involved in the developing mandible of human embryos and fetuses. 50 embryos and fetuses were studied with Hematoxylin and Eosin, Alcian, blue-PAS, Masson Trichrome, md Immunohistochemical stains. The results were as follows : 1. A 13.5 mm embryo showed the stomatodeum with dental lamina, maxillary and mandibular processes. Meckel's cartilage appeared in the mandibular arch of a 20.5 mm embryo. New bone formation was bilaterally initiated at the outer side of middle portion of Meckel's cartilage of 22-38 mm embryos. 2. Meckel'cartilage was resorbed at the 15th week fetus. The endochondral ossification was observed where there was direct replacement of cartilage by bone. Meckel'cartilage disappeared and membraneous ossification were observed at the 25th week. 3. Before the appearance of Meckel's cartilage, the expression of type I collagen was moderate at the odontogenic epithelium of maxillary & mandibular process, but mild for the expression of type II collagen. 4. During the appearance of Meckel's cartilage and new bone formation, the immunoactivity of type II collagen was more expressed than type I collagen at the Meckel's cartilage and new bone. 5. During intrarmembranous bone formation, the expression of type II collagen was rare in the bony trabeculae. There was a switch for the expression of collagens from type II to type I during the appearance of Meckel's cartilage.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.409-420
• /
• 2009

The aim of this study was to investigate clinical assessment, panorama & MRI findings and cephalometric characteristics in 42 patients with condylar resorption, who visited in the Department of Oral Medicine Kyungpook National University Hospital at 2006. The results were as follows; 1. Clinical assessment 1) Female was 34 and male was 8, females were predominant. Distribution of age showed as follows; 10s was 14, 20s was 13, 30s was 7, 40s was 3, 50s was 4 and 60s was 1 patient. 10s and 20s were predominant. 2) Most of the patients had parafunctional habit. 2. Findings of panorama & MRI 1) Most of the patients had degree of Grade II condylar resorption by panorama taking. 2) Most of the patients had disc dislocation and belonged to the degree of stage IV by MRI taking. 3. Cephalometric Characteristics 1) SN, SAr and saddle angle in female patients were significantly smaller and SN in male patients showed only significantly smaller than normal group. 2) SNA showed no difference from the normal group in both patients. SNB was smaller and ANB was lager in female patients than normal group. 3) SN-GoMe and FMA increased in patients. 4) Total posterior facial height & ramus height were significantly smaller. 5) Mandibular body length did not show any significant difference.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.3
• /
• pp.277-288
• /
• 1994

Objectives : Multiple lung cancers and/or precancerous lesions can be developed because many bronchi are exposed to carcinogens simultaneously according to the concept of "Field Cancerization". We had performed a careful bronchoscopic examination and analysed the patients of double bronchial lesions who received the separate pathologic evaluation. Methods : We studied 21 patients of double bronchial lesions among 1855 patients of bronchoscopic examination from April 1990 to December 1993 in Korea Cancer Center Hospital. We classified the patients into three groups(double malignancies of different histology, double malignancies of same histology, and combination of malignant and benign lesions) and analysed the histologic type, location, radiologic findings, and clinical parameters. Results : Among 21 patients, six patients had double malignancies of different histology, eight had double malignancies of same histology, and seven had combination of malignant and benign lesions. Out of 14 double malignant cases, 11 cases are considered as synchronous multiple primary lung cancers. Combination of squamous cell carcinomas was found in 5 cases, combination of small cell carcinoma and squamous cell carcinoma was found in 4 cases. Combination of adenocarcinoma and squamous cell carcinoma and combination of squamous cell carcinoma and poorly differentiated carcinoma were found in 1 case respectively. All patients of synchtonous multiple primary lung cancers were male and had long smoking history(average 40 pack years). Among 21 cases of double bronchial lesions, only one lesion could be detected by prebronchoscopic radiologic examination including chest CT in 15 cases. Conclusions : The presence of double bronchial lesions including multiple primary lung cancers and the limitation of radiologic examination to detect early bronchial lesions encourage us to examine the whole bronchi carefully and to perform pathologic evaluations.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.3
• /
• pp.262-269
• /
• 1994

Background : A clinical study was carried out on 153 new cases with small cell lung cancer registered at Presbyterian Medical Center, Chonju during the 7 years from 1986 to 1992. They were analyzed by sex and age distribution, symptoms and signs, classification of stage and site and its treatments. Especially, an effort was made to compare the overall survival time between limited stage and extensive stage. Methods : Among 806 lung cancer patients diagnosed by biopsy or cytologic evaluation for the 7 years, 153 patients was shown small cell lung cancer. These 153 cases was analyzed retrospectivery through patient's records, letters or telephones. Results : The results of evaluation of small cell lung cancer are as follows. Over 85 percent of the small cell lung cancer patients were over 50 years of age and prominent clinical features were cough(86.3%), sputum(75.8%) and dyspnea(54.9%). One hundred and five patients(68.7%) was staged to have limited stage. Mean survival time of the chemotherapy and chemoradiotherapy in limited stage has significant difference and its survivals are 5.3 months and 15.0 months. Patients whose disease was staged as limited, regardless of whether or not chemotherapy was administered, had a median survival time of 10.9 months, compared with 4.8 months for those with extensive stage. Conclusion : Lung cancer is one of the malignant diseases tend to increase gradually in Korea and proven to be the most common cancer next to the gastric cancer among various cancers in males found at the Presbyterian Medical Center in the past seven years. This report is a retrospective view of the clinical therapeutic results of the small cell lung cancer patients. Especially at the limited stage, the combined therapy revealed higher survival rate than the chemotherapy alone. For a more accurate evaluation. a prospective view, without any bias, of patients selected at random is needed.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.218-223
• /
• 2016

The calculation method of ground heat exchange in greenhouses has different ideas in each design standard, so there is a big difference in each method according to the size of greenhouses, it is necessary to establish a more accurate method that can be applied to the domestic. In order to provide basic data for the formulation of the calculation method of greenhouse heating load, we measured the soil temperature distribution and the soil heat flux in three plastic greenhouses of different size and location during the heating period. And then the calculation methods of ground heat exchange in greenhouses were reviewed. The soil temperature distributions measured in the heating greenhouse were compared with the indoor air temperature, the results showed that soil temperatures were higher than room temperature in the central part of greenhouse, and soil temperatures were lower than room temperature in the side edge of greenhouse. Therefore, it is determined that the ground heat gain in the central part of greenhouse and the perimeter heat loss in the side edge of greenhouse are occurred, there is a difference depending on the size of greenhouse. Introducing the concept of heat loss through the perimeter of building and modified to reflect the size of greenhouse, the calculation method of ground heat exchange in greenhouses is considered appropriate. It was confirmed that the floor heat loss measured by using soil heat flux sensors increased linearly in proportion to the temperature difference between indoor and outdoor. We derived the reference temperature difference which change the direction of ground heat flow and the perimeter heat loss factor from the measured heat flux results. In the heating design of domestic greenhouses, reference temperature differences are proposed to apply $12.5{\sim}15^{\circ}C$ in small greenhouses and around $10^{\circ}C$ in large greenhouses. Perimeter heat loss factors are proposed to apply $2.5{\sim}5.0W{\cdot}m^{-1}{\cdot}K^{-1}$ in small greenhouses and $7.5{\sim}10W{\cdot}m^{-1}{\cdot}K^{-1}$ in large greenhouses as design standard data.