• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1999.12a
• /
• pp.59-65
• /
• 1999

베트남은 1980년대 이후 사회전반에 걸쳐 많은 변화를 겪고 있으며, 특히 경제체제의 변화는 다른 분야에 파급효과를 가져오고 있다. 이와 관련해 토지에 대한 개인의 사용권이 인정되었고 따라서 지가를 효율적으로 산정, 관리하는 시스템이 필요하게 되었다. 본 연구는 이를 위해 다른 나라, 특히 한국의 공시지가 시스템을 연구, 적응하였다. 지가결정요인들은 베트남이 시장경제체제의 도입단계라는 것을 감안하여 선택되었다. 연구결과 지가결정요인 중 몇몇 요소들의 자동추출이 가능하였으며, 지가결정의 위치 요인과 물리적인 요인의 가중치를 GIS 기법을 이용해 결정할 수 있었다. 특히, 주요도로로부터 필지까지의 거리를 직선거리가 아닌 실제 이동거리로 계산하는 방법을 사용하였다. 본 연구는 지가산정을 주요소로 하는 베트남의 부동산정보시스템을 구축할 수 있는 가능성을 제시하였다는 점에서 그 의의가 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.149-152
• /
• 2006

본 논문에서는 가스저장탱크의 안전거리에 관한 지적결정시스템을 개발하였다. 이는 가스 관계법에서 규정한 안전거리를 저장탱크의 크기, 형상 및 설치위치 등의 자료를 지적결정에 의하여 선택할 수 있는 사용자 친화적 지적결정시스템으로 비전문가도 쉽게 안전거리를 파악할 수 있다. 또한 Hopkinson의 삼승근법으로 관심거리를 파악하여 법정안전거리와 과압 피해영향거리를 비교할 수 있는 자료를 생성토록 구현하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.48-58
• /
• 2003

Recently in order to extinguish the large scale of forest fire efficiently and rapidly the forest fire extinguishment equipment such as helicopters and vehicles has been mobilized. In this situation, the most consideration for the effective extinguishment is to understand the forest fire surrounding area and situation very well and arrange and manage the extinguishment equipment timely. In this paper, the client/serve-based forest fire extinguishment helicopter management system was constructed by integrating GPS(global positioning system) and GIS(geographic information system) technologies. This system manages and considers not only extinguishment equipment information such as helicopters and vehicles including manpower arrangement but also extinguishment environment information such as storing reservoir status and road situation and so on. For this, the real time tracking of helicopter location was first acquired through GPS technology then all the information about forest fire surrounding area was offered through the user-friendly interface of GIS concept. The result of constructing this system helps to extinguish a large scale of forest fire rapidly and effectively within shorter time then reduces physical damage and much manpower mobilization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.195-195
• /
• 2004

리니어 모터는 큰 이송속도와 정밀한 위치제어가 가능하여 고정밀도가 요구되는 분야에서 널리 사용되고 있으며, 이에 대한 연구도 활발히 진행되고 있다. 그 중 리니어 모터의 정밀도를 저해하는 요인 및 측정 방법에 대해서도 연구가 점차로 많이 진행되고 있으며, 현재 시스템이 가지고 있는 기하학적 오차에 관한 연구와 열변형에 관한 연구가 보고되었다. 특히 기하학적 오차는 가공물의 정밀도를 결정하는 중요한 지표이며, 가공된 물체를 결정하는 기본요소이기 때문에 가장 많이 연구되었으며, 이에 대한 다양한 해석 방법과 보상에 관한 연구가 이루어졌다.(중략)

• Journal of Astronomy and Space Sciences
• /
• v.21 no.3
• /
• pp.221-232
• /
• 2004

Gauss method for the initial orbit determination was tested using angle-only data obtained by orbit propagation using TLB and SGP4/SDP4 orbit propagation model.. As the analysis of this simulation, a feasible time span between observation time of satellite resulting the minimum error to the true orbit was found. Initial orbit determination is performed using observational data of GPS 26 and Koreasat 2 from 0.6m telescope of KAO(Korea Astronomy Observatory) and precise orbit determination is also performed using simulated data. The result of precise orbit determination shows that the accuracy of resulting orbit is related to the accuracy of the observations and the number of data.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.82-93
• /
• 2000

Purpose: We characterized the signals obtained from the components of a small gamma camera using Nal(Tl)-position sensitive photomultiplier tube (PSPMT) and optimized the parameters employed in the modules of the system. Materials and Methods: The small gamma camera system consists of a Nal(Tl) crystal ($60{\times}60{\times}6mm^3$) coupled with a Hamamatsu R3941 PSPMT, a resister chain circuit, preamplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a personal computer for control and display. The PSPMT was read out using a resistive charge division circuit which multiplexes the 34 cross wire anode channels into 4 signals (X+, X-, Y+, Y -). Those signals were individually amplified by four preamplifiers and then, shaped and amplified by amplifiers. The signals were discriminated and digitized via triggering signal and used to localize the position of an event by applying the Anger logic. The gamma camera control and image display was performed by a program implemented using a graphic software. Results: The characteristics of signal and the parameters employed in each module of the system were presented. The intrinsic sensitivity of the system was approximately $8{\times}10^3$ counts/sec/${\mu}Ci$. The intrinsic energy resolution of the system was 18% FWHM at 140 keV. The spatial resolution obtained using a line-slit mask and $^{99m}Tc$ point source were, respectively, 2.2 and 2.3 mm FWHM in X and Y directions. Breast phantom containing $2{\sim}7mm$ diameter spheres was successfully imaged with a parallel hole collimator. The image displayed accurate size and activity distribution over the imaging field of view Conclusion: We proposed a simple method for development of a small gamma camera and presented the characteristics of the signals from the system and the optimized parameters used in the modules of the small gamma camera.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.198-205
• /
• 2007

In ubiquitous environment a user can be provided with context-aware services based on his or her current location, time, and atmosphere. LBS(Location-Based Services) play an important role for ubiquitous context-aware computing. Because deployment and maintenance of this specialized equipment is costly, many studies have been conducted on positioning using only wireless equipment under a wireless LAN infrastructure. Because a CPS(Cooperative Positioning System) that uses the RSSI (Received Signal Strength Indicator) between mobile equipments is more accurate than beacon based positioning system, it requires great concentration in its applications. This study investigates the relationship between nodes by analyzing a WiPS (Wireless LAN indoor Positioning System), a similar type of CPS, and proposes a improved WiCOPS-d(Wireless Cooperative Positioning System using node density) to increase performance by determining the convergence adjustment factor based on node density.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.4
• /
• pp.530-536
• /
• 2008

Localization is one of the fundamental problems in wireless sensor networks (WSNs) that forms the basis for many location-aware applications. Localization in WSNs is to determine the position of node based on the known positions of several nodes. Most of previous localization method use triangulation or multilateration based on the angle of arrival (AOA) or distance measurements. In this paper, we propose an enhanced centroid localization method based on edge weights of adjacent nodes using fuzzy modeling and genetic algorithm when node connectivities are known. The simulation results shows that our proposed centroid method is more accurate than the simple centroid method using connectivity only.

• Annual Conference on Human and Language Technology
• /
• 1995.10a
• /
• pp.18-22
• /
• 1995

문서 검색 시스템의 도치 색인 파일은 저장 공간과 검색 시간을 줄이기 위해 색인어 사전과 문서번호를 위한 이진 도치 파일 또는 비트벡터로 구성할 수 있다. 비트벡터는 1의 값을 가지는 비트만 저장함으로써 압축이 가능하나, Bit tree 압축 방법은 block의 크기가 어떻게 결정되느냐에 따라 압축률이 달라진다. 본 논문에서는 비트벡터에 나타나는 1의 값을 가지는 비트의 개수에 의해 bit tree 압축에 대한 최적의 block 크기를 결정하는 방법을 했다. 최적의 block의 크기는 (전체 비트벡터의 크기 / 1의 개수)보다 작거나 같은 최대의 2의 승수이다. 또한 block내의 1의 값을 가지는 비트의 위치에 의해 상대 위치값을 계산해서 block의 오른쪽 반에 나타나는 비트를 더 압축할 수 있는 기법을 구현한다. 본 논문에서 구현한 압축 기법은 Run Length를 이용한 방법에 비해서 13.65%, 기존의 Bit Tree 방법에 비해서 1.88%의 압축률을 개선했다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1941-1948
• /
• 2003

This paper is about feasibility study of positioning device using magnetic suspension system which uses only vertical magnetic forces. The proposed system has inherited advantages from contact-free system, simple structure, and high expansibility in operating range different from conventional positioning devices. In this paper, the structure and operating principle are described and the linearized magnetic force and dynamic model are obtained. With the linear control theory, the experiments are executed. finally, the experimental results are shown.