• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.902-913
• /
• 1992

There have been several control schemes for the single input systems with unmeasurable state variables using variable structure control(VSC) theory. In the previous VSC, the systems must be represented in phase canonical form and the complete measurements for each state variable must be assumed. In order to eliminate these restrictions several VSC methods were proposed. And especially for the systems in phase canonical form with unmeasurable state variables, the reduced order switching function algorithm was proposed. But this method has many drawbacks and can not be used in the case of general form (not phase canonical form) dynamic system. Therefore this paper propose new construction method of switching fuction for the systems in phase canonical form, which reduce the restriction of reduced order switching function algorithm. And this algorithm can be realized for any state representation and adopted in the systems where not all states are available for switching function synthesis or control.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.21.1-21.1
• /
• 2011

우리는 분리형 쌍성 11개(원궤도 7개, 타원궤도 4개), 반분리형 쌍성 7개와 접촉형 쌍성 9개(근첩촉형 3개, 접촉형 2개, 초과 접촉형 4개)를 포함하는 27개의 다양한 종류의 표준식쌍성의 분석하여 절대량을 구하였다. 표준 식쌍성은 식쌍성의 광도곡선이 적어도 두 파장 영역 이상에서 그리고 모든 위상에서 골고루 관측되었고, 쌍성의 두 구성원 별에 대하여 시선속도 곡선이 발표된 식쌍성, 즉, 이중분광선 식쌍성 (Double line spectroscopic eclipsing binariy)으로 정의한다. 우리는 표준식쌍성의 370개의 후보에 대하여 문헌을 조사하여 관측 데이터를 확보 하였다. 이중에서 시선속도곡선과 광도곡선 자료가 동시에 존재하는 식쌍성은 80개이다. 이번 연구에서 우리는 표준식쌍성의 관측 질을 고려하여 27개의 식쌍성을 선택하여 절대량을 계산하였고, 이전 연구자들이 발표한 절대량과 비교 하였다. 이 논문에서 제시한 표준식쌍성의 유용성을 확인하기 위해 소마젤란은하에서 발견한 식쌍성의 광도곡선을 분석하여 측광학적인 해를 구하는 작업을 수행하였다. 이를 위하여 표준 식쌍성을 식쌍성의 종류별로 구분하고, 소마젤란은하에서 발견된 식쌍성 20여개를 선정하였다. 선정된 식쌍성을 표준식쌍성의 광도곡선과 형태를 비교하여 초기값을 결정하였고, 반복적인 차등보정법으로 측광학적인 해를 구하였다. 이 논문에서 제시한 표준식쌍성이 소마젤란은하에서 발견된 식쌍성들의 광도곡선의 형태를 대부분 포함하는 다양한 분포로 형성되어 있고, 이에 따른 측광학적인 해가 관측과 잘 일치함을 보여주고 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1745-1752
• /
• 2009

This Paper represents a new method, which uses defected ground structure (DGS) on the ground planes of microstrip lines, to reduce the size of the Schiffman phase shifter. DGS on the microstrip line shows an increased slow-wave effect due to the additional equivalent L and C components. So the electrical length of transmission line with DGS is longer than that of standard transmission line for the same physical length. Then, the length of transmission line with DGS can be shortened in order to maintain the original electrical length to be same. The performances of reduced phase shifter with DGS are quite similar to the ones of original Schiffman phase shifters. We can reduce the size about 15% using the DGS in original Schiffman phase shifter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.67-76
• /
• 1989

Although the standard 2-CR network filter, one of the filters used for measuring surface roughness, is being used widely in the field of industry it possesses a weak point of causing Phase-distortion when the wavelength is passing through. Phase-corrected filter is used for eliminating these phase-distortion and the difference of phase characteristics between these two filters is thought to have considerable amount of effect on the surface roughness value. Moveover, the definition on this is as yet unclear. Therefore, the Rt and Rz value, obtained when the wavelength are passed through the standard and phase-corrected filters from the same random machine-processed surface, and its standard deviation are compared and experimented in this paper. Also, the ratio of relative bearing curve complying to the phase characteristics of these two filters are acquired. As a result, the use of phese-corrected filter is appropriate in experiments where the form of wavelength is important, and the standard deviation on the same experimented values appeared greater with when using the standard filter. The rate of relative bearing curve became greater as .lambda.$_{c}$, the cut-off value of filter, became smaller.r.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.64-66
• /
• 2008

현재 전압변성기는 기존의 철심형 전압변성기에서 전자식전압변성기로 변화하고 있으며, 전자식 전압변성기의 비오차와 위상각 오차를 정확하게 평가하는 것은 전자식 전압변성기의 보급에 중요하다. 표준전압변성기 두 대와 전압변성기 비교기를 이용하여 22 kV급 전자식 전압변성기의 비오차와 위상각 오차를 평가할 수 있는 시스템을 구축하였으며, 시스템의 불확도를 분석하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.7-8
• /
• 2007

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.231-238
• /
• 2006

Nondestructive examination for low pressure turbine disc in standard nuclear power plant using phased array technique was studied. For this purpose, disc mockups were made and notches were machined in the mockups. Detection and length sizing by different methods are compared. Depth of deep notches could be measured by using AATT(absolute arrival time technique) or RATT(relative arrival time technique) but shallow notches that must be detected in early stage couldn't be measured by these two methods. For this case, notch depth was estimated by using signal response angle range and preyed usefulness.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.6
• /
• pp.355-364
• /
• 2010

Considering biological safety, it is very important to measure acoustic power from ultrasonic array probe for diagnostic ultrasound imaging applications. In this paper, to measure acoustic power from each element on array probe for ultrasonic diagnostic equipment, we reconstruct and automate the acoustic power measurement system. The acoustic power from linear, phased and curved array were measured and analyzed. As a result of measurement, the effects caused by directivity of sound beam from curved array were founded. To remove these effects, we developed and applied the correction model. The proposed system is useful to evaluate characteristics of the acoustical output power of array probe.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.371-376
• /
• 2010

This paper presents an efficient demapper architecture based soft-decision using the phase-section for Digital Video Broadcasting via satellite, Second Generation (DVB-S2). To achieve the satisfactory performance under a very low SNR conditions with the efficient hardware resource utilization, we propose a simple soft-decision demapper architecture using comparators to compare the phase of symbols and memories. The proposed architecture can decrease about 81% of the hardware resource, satisfying the BER requirements of DVB-S2. It has been thoroughly verified with an FPGA board and R&S(R)SFU (Rohde&Schwarz SFU-K108) broadcaast test equipment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.489-495
• /
• 2007

An experimental study was carried out in order to measure the pitch dynamic stability derivatives of a standard dynamics model in a low-speed wind tunnel. When a trigger signal is generated, the aircraft model starts oscillation with constant amplitudes and frequencies provided by DC electrical servomotor. The measured data are simultaneously recorded on a data recorder for 25 cycles of the model oscillation. The Phase shift needed to compute the dynamic stability derivatives is determined by calculating differences between the peak values of the input and output signals from the dynamic stability balance. Stabilator effects on the stability derivatives were also investigated with deflection angles. Although the driving apparatus and experimental equipments manufactured creatively for this study are different from other experiments, the variational trend of dynamic stability derivatives with the angle of attack is in a good accordance with the results of TPI, NAE, and FFA.