• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1976-1977
• /
• 2003

3차원 영상저장과 복원에 이용되어왔던 변형 삼각간섭계를 이용하여 비접촉진단에의 응용가능성을 연구한다. 변형 삼각간섭계를 이용하여 측정대상물체의 간섭패턴을 3-5개 구하고 이로부터 위상지도를 얻고 이로부터 변형량을 계산할 수 있다는 것을 이론적으로 제시한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$. Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe.

• Korean Journal of Optics and Photonics
• /
• v.25 no.6
• /
• pp.326-333
• /
• 2014

Phase-measuring deflectometry is a full-field gradient measuring technique that lends itself very well to testing specular optical surfaces. We have measured the deformation of the surface of a lens by transmission deflectometry with liquids. In this study, a method is proposed for measuring the refractive index distribution of a transparent object component. The proposed method combines transmission deflectometry with liquids. The deformed fringe patterns of a sample immersed in different fluids are recorded, and then the three-dimensional phase information of the sample is reconstructed numerically. We have used phase-shifting and temporal phase-unwrapping methods to retrieve the phase from the measured deformed fringe pattern, and we have used a least-squares method to find the height information of the specular surface from the calculated slope. In particular, we have proposed a theoretical model for determining the refractive index of sample and planar convex lens are demonstrated experimentally.

• Journal of KIISE:Software and Applications
• /
• v.27 no.5
• /
• pp.551-562
• /
• 2000

Content-based image retrieval system retrieves an image from a database using visual features. Among approaches to express visual aspects in queries, 'query by sketch' is most convenient and expressive. However, every 'query by sketch' system has the query imperfectness problem. GContent-based image retrieval system retrieves an image from a database using visual features. Among approaches to express visual aspects in queries, 'query by sketch' is most convenient and expressive. However, every 'query by sketch' system has the query imperfectness problem. Generally, the query image produced by a user is different from the intended target image. To overcome this problem, many image retrieval systems use the spatial relationships of the objects, instead of pixel coordinates of the objects. In this paper, a query-converting algorithm for an image retrieval system, which uses the spatial relationship of every two objects as an image feature, is proposed. The proposed algorithm converts the query image into a graph that has the minimum number of edges, by eliminating every transitive edge. Since each edge in the graph represents the spatial relationship of two objects, the elimination of unnecessary edges makes the retrieval process more efficient. Experimental results show that the proposed algorithm leads the smaller number of comparison in searching process as compared with other algorithms that do not guarantee the minimum number of edges.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.3
• /
• pp.117-127
• /
• 1995

In this paper, we suggest a motion analysis method using ART-I1 competitive learning neural network and fuzzy reasoning by matching the same objects through the consecutive image sequence. we use the size and mean intensity of the region obtained from image segmentation for the region matching by the region and use a ART-I1 competitive learning neural network wh~ch has a learning ability to reflect the topology of the input patterns in order to select characteristic points to describe the shape of a region. Motion vectors for each regions are obtained by matching selected characteristic points. However, the two dimensional image, the projection of the the three dimensional real world, produces fuzziness in motion analysis due to its incompleteness by nature and the error from image segmentation used for extracting information about objects. Therefore, the belief degrees for each regions are calculated using fuzzy reasoning to l-nanipulate uncertainty in motion estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1369-1375
• /
• 2016

In this paper, we present a depth extraction method of integral imaging using correlation between elemental images with phase only filter. Integral imaging is a passive three-dimensional (3D) imaging system records ray information of 3D objects through lenslet array by 2D image sensor, and displays 3D images by using the similar lenslet array. 2D images by lenslet array have different perspectives. These images are referred to as elemental images. Since the correlation can be calculated between elemental images, the depth information of 3D objects can be extracted. To obtain high correaltion between elemental images effectively, in this paper, we use phase only filter. Using this high correlation, the corresponding pixels between elemental images can be found so that depth information can be extracted by computational reconstruction technique. In this paper, to prove our method, we carry out optical experiment and calculate Peak Sidelobe Ratio (PSR) as a correlation metric.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1129-1136
• /
• 2010

Damper springs in a drive-line absorb the impulsive torque generated when a lock-up clutch is connected directly, instead of via a fluid coupling. Design optimization and finite element analysis were performed to improve the shock- and vibration-absorption capacity of the lock-up clutch. For this purpose, a multi-body dynamics model was developed by including the main parts of a vehicle, such as an engine with a clutch, a transmission, drive shafts and wheels, and a whole mass of a vehicle. The spring constants were selected so that resonance of a system could be avoided. Damper springs were optimized on the basis of the spring constants, impulsive torques, compressed angles, spring counts, fatigue constraints, etc. Topology optimization was performed for three plates with the damper springs. The compliance was set up as an objective function, and volume fraction was fixed below 0.3. A new shape for the plates was proposed on the basis of the topology result.

• Journal of the Korea Computer Graphics Society
• /
• v.11 no.2
• /
• pp.40-46
• /
• 2005

본 논문에서는 스윕곡면(sweep surface)을 기반으로 복잡한 3차원 물체의 형상을 변형하는 새로운 자유형상 변형(free-form deformation)기법을 제시한다. 본 논문에서 제시한 방법은 기존의 격자점(control lattices)을 조정하는 체적기반의 방법에 비해 스윕기반의 절차적 (procedural) 모델링 기법의 직관성을 활용하여 사용자에게 보다 효율적인 형상변형 기법을 제공한다. 3차원 물체의 정점들은 스윕곡면의 단면(cross-section)에 바인딩(binding) 되어 곡면의 변화에 따라 형상변형을 한다. 본 논문에서 제시한 스윕기반 형상변형 기법은 3차원 물체를 부분적으로 변형하는 기법과 계층구조를 기반으로 전반적인 형상을 변형하는 기법으로 구분된다. 부분적인 형상변형 기법은 스윕곡면을 구성하는 성분의 다단계(multi-level) 표현을 통하여 사용자에게 다중해상도(multi-resolution) 형상변형 기능을 제공한다. 계층구조에 기반한 형상변형 기법은 복잡한 3차원 물체를 위상구조에 따라 여러 계층으로 분할하고, 각 부분의 형상을 근사하는 스윕곡면들을 생성한다. 분할된 각 부분의 정점(vertices)들은 해당 스윕곡면에 바인딩 되어 스윕곡면의 단면의 변화를 따르게 된다. 이러한 상황하에서 스윕곡면들은 3차원 물체의 계층구조에 따라서 서로 상호작용(interaction)을 하게 되고, 결과적으로 3차원 물체의 각부분은 상호반응적 형상변형을 한다. 이러한 계층구조에 기반한 상호반응적 형상변형 기법은 사용자의 의도에 부합하는 보다 사실적이고 기능적인 형상변형을 가능하게 한다. 본 논문에서는 다양한 3차원 물체에 대한 실험을 통해 제시된 방법의 효율성을 입증한다. 결과 막성 사구체병증과 같은 신질환이 발견될 수 있으므로 신조직검사의 적응증에 합당한 경우 적극적인 신조직검사를 시행하여 원인 질환을 찾는 노력이 필요할 것으로 사료된다.. 남아가 75명으로 남녀비는 3.6:1을 보였다. 임상병리학적 분류상 일차성 신증후군이 89명(92.7%), 이차성 신증후군이 7명(7.3%)이었으며 일차성 신증후군에서 minimal change nephrotic syndrome이 71명으로 79.8%, focal segmental glomerulosclerosis 11.2%, mesangial proliferation 4.5%, membranoprolifrative glomeulonephritis 3.4%, membranous nephropathy 1명 1.1%이었으며 2차성 신증후군은 $Henoch-Sch\"{o}nlein$ nephritis가 3례로 가장 많았다. 미세변화 신증후군 71명 중 비재발군이 16명으로 22.5%, 비빈발 재발군 49.3%, 빈발 재발군 18.3%, 스테로이드 의존군 9.9%를 보였다. 결론 : 대전시에서의 신증후군 환아의 발생빈도는 15세이하 소아 10만명당 약 5명으로 추정되었으며 10여 년전과 비교하여 큰 변화를 보이지는 않았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.4
• /
• pp.289-296
• /
• 2018

The offshore subsea platforms are connected to subsea pipelines to transport gas/oil from wells. The pipe is a multilayered structure of polymer and steel for compensating both flexibility and strength. The pipe also requires reinforcement structures to endure the extreme environmental conditions. A vertebrae structure of bend restrictors is one of the reinforcement structures installed to protect the subsea pipe from excessive bending deformations. In this study, structural behaviors of the subsea pipeline with bend restrictors are investigated by the multi-body contact analysis in Abaqus 6.14-2. Contact forces of each bend restrictor extracted from the multi-body contact analysis can be boundary conditions for topology design optimization in Altair Hyperworks 13.0 Hypermesh-Optistruct. Multiple design constraints are considered to obtain a manufacturable design with efficient material usage. Through the multi-body contact analysis with optimized bend restrictors, it is confirmed that the bending performance of the optimized design is enhanced.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.59-63
• /
• 2014

Object of this study is to see whether the arc-groove on a D-shape bluff body effects the drag reduction or not. To this end, the changes of the boundary layer on the surface of the object, the downstream flow field and wake flow were found by experiments. The experiments are conducted by changing number and depth of the groove, angle of the first groove and Reynolds number(Re). Groove did not effect on the surface in the downstream boundary layer of the object and was minimal impact on the time mean velocity recovery of the wake flow. Also the effects of Groove did not have a significant impact on the structure of the wake and the wake frequency. Therefore it is found that the arc-groove of the drag reduction effect on the D-shape bluff body was smaller.