• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.937-950
• /
• 2015

Microstrip reflectarray is an antenna which controls its radiation pattern with a number of reflective elements. Conventionally, the reflectarray has been researched to replace curved reflector antennas. In this paper, design theories of reflectarray is briefly introduced, and research trends of high gain and broadband reflectarrays are reviewed. To improve the gain of the reflectarrays, it is required that the reflection phase errors on the reflectarray surface be minimized. For this purpose, sufficiently wide reflection phase range and low phase sensitivity should be realized with the designed element. For bandwidth improvement, the reflection phase of the element should be linear with the frequency variation. In this paper, various researches to improve the reflection phase characteristics of the element for high gain and broadband reflectarrays, such as multi-layer and single-layer multi-resonant structures, are reviewed. Also, dual-reflectarray configuration for compact antenna design is reviewed. Finally, various applications of reflectarrays such as contoured beam, near-field focusing, and RCS reduction are reviewed.

• Journal of KIISE:Software and Applications
• /
• v.36 no.2
• /
• pp.122-130
• /
• 2009

Conventional approaches for car number plate detection have dealt with those input images having similar sizes and simple background acquired under well organized environment. Thus their performance get reduced when input images include number plates with different sizes and when they are acquired under different lighting conditions. To solve these problem, this paper proposes a new scheme that uses the geometrical features of number plates and their topological information with reference to other features of the car. In the first step, those edges constructing a rectangle are detected and several pixels neighboring those edges are selected as the seed pixels for region growing. For region growing, color and intensity are used as the features, and the result regions are merged to construct the candidate for a number plate if their features are within a certain boundary. Once the candidates for the number plates are generated then their topological relations with other parts of the car such as lights are tested to finally determine the number plate region. The experimental results have shown that the proposed method can be used even for detecting small size number plates where characters are not visible.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.239-245
• /
• 2006

Experimentally measured Lamb wave group velocities in composite materials with anisotropic characteristics are not accorded with the theoretical group velocities as calculated with the Lamb wave dispersion equation. This discrepancy arises from the fact that the angle between the group velocity direction and the phase velocity direction in anisotropic materials exists. Wave propagation in a composite material with anisotropic characteristics should be considered with respect to magnitude in addition to direction. In this study, $S_0$ mode phase velocity dispersion corves are depicted with the variation of degree with respect to the fiber direction using a Lamb wave dispersion relation in the unidirectional, bidirectional, and quasi-isotropic composite plates. Slowness surface is sketched by the reciprocal value of the phase velocity curves. The magnitude and direction of the group velocity are calculated from the slowness surface. The theoretically determined group velocity, which is calculated from the slowness surface, Is compared with experimentally measured group velocities. The proposed method shows good agreements with theoretical and experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.906-913
• /
• 2009

In this paper, the design concept and implementation method of the X-band 4-bit($22.5^{\circ}$, $45^{\circ}$, $90^{\circ}$, $180^{\circ}$ BIT) diode phase shifter in the parallel plate waveguide are introduced. The simulated results of $11.25^{\circ}$, $22.5^{\circ}$ and $45^{\circ}$ dielectric phase shift layers using CST's MWS and Agilent's ADS are presented, and the measured results are compared with the simulated ones. The simulated phase shift errors at the center frequency are $0.6^{\circ}$, $0.7^{\circ}$, and $3.5^{\circ}$, respectively and the measured phase shift errors at the center frequency are $0.6^{\circ}$, $2^{\circ}$, and $5.5^{\circ}$, respectively. Also, the MWS simulated results of $22.5^{\circ}$ BIT and $45^{\circ}$ BIT phase shifter are presented and compared with the ADS simulated ones to verify the validity of the presented design concept and implementation method.

• Product Safety
• /
• s.28
• /
• pp.29-30
• /
• 1994

산업은행은 최근 우리나라 33개 산업분야에 대해 $\ulcorner$세계속의 한국산업 1994$\lrcorner$란 제목의 영문판 보고서를 내놓았다. 이에따르면 우리나라는 지난해 총 3백64억달러를 생산, 세계실적 6천9백40억달러의 5.2$\%$를 점유한 세계6위의 전자산업 위상을 갖춘 것으로 평가했다. 그럼에도 우리나라 전자산업은 기술부족과 가격경쟁력 열세, 선진시장에서 점유율하락등의 문제점

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.937-944
• /
• 1990

본 연구에서는 파이프내에 부분 오리피스판을 장착하여 이 장애벽 전후에서 발생하는 유동현상을 박리 전단층의 유동구조와 재부착 경계층을 중심으로 실험적으로 연구하였다. 측정방법으로 유동의 속도장변화를 구하기 위하여 NMR 위상 영상법을 사용하였고, 과망간산칼륨을 염료로 가시화 실험을 수행하여 그 결과를 비교 검토하였 다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.839-840
• /
• 2010

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.118-119
• /
• 2000

최근에 많이 사용되는 휴대용기기의 표시장치인 액정표시장치를 보면 반사형 액정표시장치가 많이 사용되고 있다. 반사형 액정표시장치는 표시장치의 전력소모의 많은 부분을 차지하는 backlight 를 주변 광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로서 많이 연구되고있다. 최근에 연구되고있는 반사형 표시장치를 살펴보면 반사형 TN (Twisted Nematic) LC 모드가 주류를 이루고 있으나 콘트라스트비가 낮은 단점이 있다$^{[1]}$ . 이를 극복하기 위하여 반사형 VA (Vertical Aligned) LC 모드가 제시되어진다. VA LC 모드는 TN LC 모드와 반대로 음의 유전율 이방성을 가지는 액정물질을 이용하여 유리기판에 수직으로 배향시킨 모드로서, 전압이 인가되지 않은 초기상태에는 액정 cell 이 복굴절을 전혀 나타내지 않는다. TN LC 모드와 정확히 역의 구조를 가진다. 그리하여 초기상태에서 편광판 한 장과 광대역 λ/4 위상지연판을 사용하여 뛰어난 어두운 상태를 구현할 수가 있다. (중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1246-1253
• /
• 2007

The recent issue of optical pickup actuators is to apply optical storage devices to mobile devices such as a cellular phone and PDA. It requires actuators to become smaller than conventional types. As the size becomes smaller, the magnetic force is reduced and the assembly of optical pickup actuators becomes more difficult. In addition, its dynamic characteristics are changed. In this paper, methods to improve magnetic forces and dynamic characteristics are suggested and the optimal result of the plate spring design is obtained. A diamond shape magnet and the fine pattern coil (FPC) are used to improve magnetic forces and damping elements are attached to decrease the peak magnitude of the mode instead of using structural damping, mostly for the purpose of improving the accuracy of the finite element simulation. To get more stable dynamic characteristics than conventional ones, a plate spring is applied to the optical pickup actuator and it is optimized with topology and parameter optimization to obtain the concept and the detail design, respectively.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.347-353
• /
• 1999

We constructed an interferometer for precise measurement of the ball diameter, and measured the diameter of steel ball with a diameter of 78 mm. The interferometer was consisted of etalon to instal ball between two parallel plates and placed on the monolithic flexure to be moved parallel. The ball diameter was calculated from phase difference of one pair of signals interfered between the both sides of ball and two parallel plates, and the signals was observed by photodetectors with scanning the etalon. The results showed that the diameter of steel ball was 78.1893544 mm and measurement uncertainty of 29 nm in confidence level of 95.5%.