• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.23-26
• /
• 2000

In spot welded joint. Electronic Speckle Pattern Interferometry(ESPI) method using the Model 95 Ar laser a video system and an image processor was applied to measure the stress Unlike traditional strain gauges or Moire method, ESPI method has no special surface preparation or attachments and can be measured in-plane displacement with non-contact and real time. In this experiment, specimens are loaded in parallel with a load cell. The specimens are made of the cold rolled steel sheet with 1mm thickness, are attached strain. gauges. This study Provides an example of how ESPI has been used to measure stress and strain inspecimen. The results measured by ESPI are compared with the data which was measured by strain gauge method under tensile testing.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2012

The performance of blind equalization algorithm ISCA was compared with MSCA that is used for the minimization of the inter symbol interference which occurs in the time dispersive communication channel for digital transmission. Because of the non-linearities of a magnitude and phase transfer characteristics of a communication channel, the transmitting signal will be received that band limited and time dispersived. Therefore the distortion was compensated by using the self adaptive equalizer at the receiving side, then passing through the detector for the decision of "1" or "0". At this time the Constellation Dependent Constant is played an important role in the adaptive equalizer used on the receiver. In order to calculation of this constant, the ISCA and MSCA was used the second order statistics. The ISCA and MSCA which are possible to compensation of mensioned transfer function simulataneously, are improved the performance of original SCA algorithm and then was compared the performance by computer simulation. For this, the recovered constellation, residual isi and MSE was used, and a result of performance comparison, the ISCA algorithm has better than the MSCA in every performance index. But on the steady state of equalizer, the variation of performance due to the CME terms in the MSCA equalization algorithm was less than the ISCA, so MSCA has better stability.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2004

Switching phenomenon of a three-waveguide optical coupler was analyzed by using the coupled mode theory, and the coupling-length of the device was calculated by means of the FDM. CPW traveling-wave electrodes were designed by the CMM and SOR simulation techniques so as to satisfy the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on a z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electroplating technique. Insertion loss and switching voltage of the optical modulator were about 4 ㏈ and 15.6V. Network analyzer was used to obtain S parameters and corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted as such Z$_{c}$=39.2 $\Omega$, Neff=2.48, and a0=0.0665/cm((GHz) (1/2)). The measured optical response R(w) was compared with the theoretically estimated and both responses were shown to agree well. The measurement results revealed that the ㏈ bandwidth turned out to be about 13 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2015

In this paper, a gas sensor using a modified $90^{\circ}$ hybrid coupler structure with conducting polymer which operates at 2.4 GHz is represented. Conducting polymers are used to the gas sensing material in proposed sensors. The conducting polymer varies its electrical property, such as work function and conductivity corresponding to the certain gas. To verify this variation of electrical property of conducting polymer at microwave frequencies, the conducting polymer is incorporated with the $90^{\circ}$ hybrid coupler structure, and this proposed sensor operates as reflection type variable attenuator and variable phase shifter. The conducting polymer is employed as impedence-variable transmission lines that cause a impedance mismatching between the general transmission line and conducting polymer. The experiment was conducted with 100 ppm ethanol gas at temperature of $28^{\circ}C$ and relative humidity of 85 %. As a result, the amplitude deviation of $S_{21}$ is 0.13 dB and the frequency satisfying ${\angle}S_{21}=360^{\circ}$ is shifted about 2.875 MHz.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.434-441
• /
• 2014

This study is purposed to measure airborne asbestos concentrations at demolition sites and surrounding areas of asbestos containing buildings in Seoul and examine whether the measurement results correspond with allowable exhaust standard for asbestos of the Asbestos Safety Control Act. The airborne asbestos concentrations for 37 sites were below the detection limit ($7fiber/mm^2$) in 101 (35%) out of 288 samples. The whole average airborne asbestos concentration in 37 sites was $0.003{\pm}0.002f/cc$(max 0.0013 f/cc) and almost the whole airborne asbestos concentrations were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act. So possibility of asbestos exposure is not yet a major concern at current levels for sites demolished of asbestos containing buildings in Seoul. Looking at each sampling point, the average airborne asbestos concentrations in boundary line of site, entrance of sanitation, around the workplace (in), around the workplace (out), negative pressure units, storage area for waste, outlet for waste and residential area of residents were respectively $0.002{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.004{\pm}0.002f/cc$, $0.005{\pm}0.004f/cc$, $0.005{\pm}0.003f/cc$ and $0.003{\pm}0.002f/cc$. As a result, all sampling points of study were satisfied with allowable exhaust standard for asbestos, 0.01 f/cc, of the Asbestos Safety Control Act.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1789-1793
• /
• 2008

전자파표면유속계는 홍수유속측정을 위하여 개발된 기기로 평 갈수기에는 유속측정이 불가하여 프로펠러 유속계를 이용하고 있다. 현재 보급된 전자파표면유속계는 하천의 흐름방향에 나란하게 설치하였을 때에만 유속을 측정할 수 있는 기기의 구조상의 한계성 때문에 교량이 없는 지점에서는 유속측정이 불가하여 유량산정을 할 수가 없다. 또한 편각측정이 불가능하여 기기를 각 측선마다 이동 설치하여야 하기 때문에 유속측정시 효율성 떨어진다. 이에 홍수시 유량측정의 효율성을 증대시키고 전자파표면유속계의 활용도를 높이고자 편각측정이 가능하도록 전자파표면유속계의 성능을 개선하는 것이 본 연구의 주된 목적이다. 전자파표면 유속계에서의 편각 측정은 하천의 유속방향을 기준으로 정면에서 측정하면 수평 편각이 0도가 되며 좌우로 안테나를 회전하여 움직인 각도가 측정 편각으로 결정된다. 현장에서 전자파표면유속계의 사용시 편의성을 높이고 유량측정을 효율적으로 하기 위해서는 가급적 편각을 크게 해서 측정을 해야 하지만, 편각이 증가하면 전자파의 물리적 특성 때문에 반사된 신호의 수신 크기가 감소하여 측정이 불가능하게 된다. 이러한 문제를 해결하기 위해서는 유속 측정시 전자파 출력을 기존의 시스템보다 높게 물표면에 발사하여야 하며 안테나를 포함한 RF 모듈의 수신감도 및 지향성이 개선되어야 한다. 이에 편각측정이 가능하도록 이러한 사항에 주안점을 두어 새로운 시스템을 구성하였다. 수신감도 향상을 위해서는 물표면에 반사되어 돌아오는 신호를 가장 먼저 수신하는 안테나의 특성이 중요하며 그 다음 수신용 증폭기, IF 증폭기 순으로 개선이 필요하다. 본 연구에서는 안테나의 형태를 기존 파라볼릭 안테나에서 위상 배열 평면안테나로 변경하였으며, 이에 따른 이점으로는 송수신부를 분리하여 하나의 평면에 두 개의 안테나를 구성할 수 있다는 사항이다. 즉 외형적으로는 하나의 안테나로 보이지만 두 개의 안테나가 하나로 구성된 것이다. 송수신부를 분리하는 형태는 기존 파라볼릭 안테나에선 불가능한 구조로 변경에 따른 수신감도 향상은 수치적으로 10dB 이상 개선하였다. 송수신부 분리가 수신감도에 영향을 미치는 이유는 물표면으로 발사된 송신 신호의 일부가 수신단으로 유입되는 현상으로 누설되는 송신 신호를 최대한 차단하는 분리도가 수신 신호 검출에 직접적인 양향을 주기 때문에다. 평면 안테나를 적용하면 기존 파라볼릭 안테나에서 사용하던 써큘레이터라는 부품을 삭제할 수 있으며, 안테나의 구조적인 분리를 통해서 수신감도를 개선할 수 있었다. 안테나의 지향성은 발사하는 전자파의 빔폭 성능과 일치하며 각도 단위로 표시한다. 각도 값이 작을수록 전자파의 에너지가 한 곳에 집중된다고 말할 수 있다. 즉 빔폭이 크면 측정시 반사면적이 커져 정확한 지점의 유속을 측정하기 어려운 문제가 발생한다. 본 연구를 통해 빔폭은 기존 안테나 대비2도를 개선하였으며 25%의 개선 효과를 얻었다. 또한 수신감도 및 지향성 개선과 더불어 전자파의 출력을 기존 장비 대비하여 1.6배를 증가하여 편각측정을 위한 전자파표면 유속계의 성능을 개선하였다.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.2
• /
• pp.64-69
• /
• 2008

As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. There has been an argument that it may be a non-issue in practice because the probability of islanding is extremely low. However, there are three counter-arguments: First, the low probability of islanding is based on the assumption of 100% power matching between the PVPCS and the islanded local loads. In fact, an islanding can be easily formed even without 100% power matching (the power mismatch could be up to 30% if only traditional protections are used, e.g. under/over voltage/frequency). The 30% power-mismatch condition will drastically increase the islanding probability. Second, even with a larger power mismatch, the time for voltage or frequency to deviate sufficiently to cause a trip, plus the time required to execute a trip (particularly if conventional switchgear is required to operate), can easily be greater than the typical re-close time on the distribution circuit. Third, the low-probability argument is based on the study of PVPCS. Especially, if the output power of PVPCS equals to power consumption of local loads, it is very difficult for the PVPCS to sustain the voltage and frequency in an islanding. Unintentional islanding of PVPCS may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards. Therefore the verification of anti-islanding performance is strongly needed. In this paper, improved RPV method is proposed through considering power quality and anti-islanding capacity of grid-connected single-phase PVPCS in IEEE Std 1547 ("Standard for Interconnecting Distributed Resources to Electric Power Systems"). And the simulation results are verified.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2009

In this paper, a photovoltaic system is designed with a step up chopper and single phase PWM(Pulse Width Modulation) voltage source inverter. Where proposed Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical voltage and current dropping character. The single phase PWM voltage source the inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power. from 10 to 20[%]. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In order to enhance the efficiency of photovoltaic cells, photovoltaic positioning system using sensor and microprocessor was design so that the fixed type of photovoltaic cells and photovoltaic positioning system were compared. In result, photovoltaic positioning system can improved 5% than fixed type of photovoltaic cells. In addition, I connected extra power to the system through operating the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and the phase of single-phase inverter of PWM voltage type can be synchronized. And, It controlled in order to provide stable pier to the load and the system through maintaining high lurer factor and low output power of harmonics.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.141-145
• /
• 2014

To assess the health risk for benzo(a)pyrene by the intake of edible oils, 288 cases of edible oils collected from food markets were analysed using the high performance liquid chromatography with fluorescence detector. The levels of benzo(a)pyrene were from non-detection to $4.78{\mu}g/kg$, and the average was $0.11{\mu}g/kg$. The chronic daily exposures of benzo(a)pyrene for total population group and consumer-only group were estimated using the food consumption data in the fifth Korea National Health and Nutrition Examination Survey in 2011. The estimated daily intake of benzo(a)pyrene was $4.26{\times}10^{-3}ng/kg$ b.w./day for total population group and $7.64{\times}10^{-3}ng/kg$ b.w./day for consumer-only group. The MOE (margin of exposure) of benzo(a)pyrene for total population group and consumer-only group was $7.28{\times}10^7{\sim}1.74{\times}10^8$ and $3.95{\times}10^7{\sim}9.42{\times}10^7$, respectively. Accordingly, the health risk from benzo(a)pyrene caused by the intake of edible oils was considered as a very low level.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.137-147
• /
• 2014

Purpose : The purpose of this study is to verify the accuracy of dose delivery according to the patient's breathing cycle in Gated Volumetric Modulated Arc Therapy Materials and Methods : TrueBeam STxTM(Varian Medical System, Palo Alto, CA) was used in this experiment. The Computed tomography(CT) images that were acquired with RANDO Phantom(Alderson Research Laboratories Inc. Stamford. CT, USA), using Computerized treatment planning system(Eclipse 10.0, Varian, USA), were used to create VMAT plans using 10MV FFF with 1500 cGy/fx (case 1, 2, 3) and 220 cGy/fx(case 4, 5, 6) of doserate of 1200 MU/min. The regular respiratory period of 1.5, 2.5, 3.5 and 4.5 sec and the patients respiratory period of 2.2 and 3.5 sec were reproduced with the $QUASAR^{TM}$ Respiratory Motion Phantom(Modus Medical Devices Inc), and it was set up to deliver radiation at the phase mode between the ranges of 30 to 70%. The results were measured at respective respiratory conditions by a 2-Dimensional ion chamber array detector(I'mRT Matrixx, IBA Dosimetry, Germany) and a MultiCube Phantom(IBA Dosimetry, Germany), and the Gamma pass rate(3 mm, 3%) were compared by the IMRT analysis program(OmniPro I'mRT system software Version 1.7b, IBA Dosimetry, Germany) Results : The gamma pass rates of Case 1, 2, 3, 4, 5 and 6 were the results of 100.0, 97.6, 98.1, 96.3, 93.0, 94.8% at a regular respiratory period of 1.5 sec and 98.8, 99.5, 97.5, 99.5, 98.3, 99.6% at 2.5 sec, 99.6, 96.6, 97.5, 99.2, 97.8, 99.1% at 3.5 sec and 99.4, 96.3, 97.2, 99.0, 98.0, 99.3% at 4.5 sec, respectively. When a patient's respiration was reproduced, 97.7, 95.4, 96.2, 98.9, 96.2, 98.4% at average respiratory period of 2.2 sec, and 97.3, 97.5, 96.8, 100.0, 99.3, 99.8% at 3.5 sec, respectively. Conclusion : The experiment showed clinically reliable results of a Gamma pass rate of 95% or more when 2.5 sec or more of a regular breathing period and the patient's breathing were reproduced. While it showed the results of 93.0% and 94.8% at a regular breathing period of 1.5 sec of Case 5 and 6, it could be confirmed that the accurate dose delivery could be possible on the most respiratory conditions because based on the results of 100 patients's respiratory period analysis as no one sustained a respiration of 1.5 sec. But, pretreatment dose verification should be precede because we can't exclude the possibility of error occurrence due to extremely short respiratory period, also a training at the simulation and careful monitoring are necessary for a patient to maintain stable breathing. Consequently, more reliable and accurate treatments can be administered.