• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.669-674
• /
• 2002

Ni-Zn ferrite was sintered by microwave hybrid sintering method using microwave energy of 2.45 GHz, 700 W in the temperature range of 900$^{\circ}C$ ∼ 1070$^{\circ}C$. A high density (98%TD) Ni-Zn ferrite, added Bi$_2$O$_3$ and CuO, with a single phase was obtained by microwave sintering at 970$^{\circ}C$ for 15 min. All the sintered samples showed sintered density over 90% of TD. These results indicate that the processing time and energy consumption can be reduced significantly by microwave hybrid sintering method.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.325-338
• /
• 2012

Currently, there are the technologically urgent needs of fabricating the hyper coal (HC) based on the approach to extracting mainly effective organics from low rank coals (LRCs), because some industrial countries pursue global sustainability dealing with hot issues such as local energy supply security as well as global warming. In this study, as of the fabrication of clean HCs via LRCs upgrading, we comprehensively review the R&D status of two solvent extraction technologies, namely, Ohm heating (OH) and microwave irradiation (MI) extraction processes on the basis of the performance indicator such as a HC extraction yield.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.370-376
• /
• 2016

Corrosion on the surface of a structure can generate cracks or cause walls to thin. This can lead to fracturing, which can eventually lead to fatalities and property loss. In an effort to prevent this, laser imaging technology has been used over the last ten years to detect thin-plate structure, or relatively thin piping. The most common laser imaging was used to develop a new technology for inspecting and imaging a desired area in order to scan various structures for thin-plate structure and thin piping. However, this method builds images by measuring waves reflected from defects, and subsequently has a considerable time delay of a few milliseconds at each scanning point. In addition, the complexity of the system is high, due to additional required components, such as laser-focusing parts. This paper proposes a laser imaging method with an increased scanning speed, based on excitation and the measurement of standing waves in structures. The wavenumber of standing waves changes at sections with a geometrical discontinuity, such as thickness. Therefore, it is possible to detect defects in a structure by generating standing waves with a single frequency and scanning the waves at each point by with the laser scanning system. The proposed technique is demonstrated on a wall-thinned plate with a linear thickness variation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.273-273
• /
• 2012

컷오프 진단법은 두 개의 탐침 형태로 제작된 마이크로 웨이브 진단법으로, 간단한 수식을 통해 전자밀도, 전자온도 등을 측정할 수 있다. 컷오프 탐침은 방사 안테나, 측정 안테나와 네트워크 분석기로 구성되어 있다. 네트워크 분석기는 두 안테나 사이의 플라즈마 투과 스펙트럼을 만드는데 쓰이며, 스펙트럼 분석을 통해 플라즈마 변수들을 측정할 수 있다. 이 진단법은 장치나 분석방법이 매우 간단한 장점을 지니며, 약 1 mW 정도의 적은 파워를 사용하여 플라즈마 상태를 거의 변화시키지 않는 측정이 가능하다. 또한 CF4와 같은 공정 가스를 이용한 플라즈마에서도 사용이 가능하다. 그러나 컷오프 진단법을 사용한 측정은 다른 종류의 진단법과 마찬가지로, 약 1초 정도의 긴 시간을 필요로 하는 단점이 있어, 펄스 플라즈마나 토카막과 같이 빠르게 변하는 플라즈마를 측정하기에는 무리가 있다. 최근에 개발된 푸리에 컷오프 탐침(Fourier Cutoff Probe, FCP)는 기존의 컷오프 탐침의 느린 시간분해능을 개선하기 위해 개발되었다. [1] 펄스 형태의 단일신호를 플라즈마를 투과하기 전후로 비교하면 투과 스펙트럼 및 플라즈마 변수들을 얻을 수 있으며, 기존 연구에서 구한 시간 분해능은 약 15 나노초였다. 이 값은 펄스 발생장치의 스펙에 따라 변하게 된다. 펄스폭이 짧을수록 시간분해능이 좋아지지만, 무한정 좋아질 수는 없다. 이 논문에서는 FCP 측정의 시간 분해능을 이론적으로 구하고, 시간 분해능의 이론적 한계를 구했다.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.840-846
• /
• 2008

Microwave-assisted extraction (MAE) of grape seeds was performed under the different conditions based on a central composite design for independent variables of microwave power ($0{\sim}120\;W$), ethanol concentration ($0{\sim}100%$) and extraction time ($1{\sim}5\;min$). Response surface methodology (RSM) was used to predict the optimum extraction conditions for three dependent variables in grape seed extracts: total yield, total catechin and electron donating ability. Determination coefficients ($R^2$) of regression equations for the three dependent variables were higher than 0.9 (p < 0.01). The optimal MAE conditions to yield the maximum value of total catechin (434.16 mg%) were 122.76 W microwave power, 42.88% ethanol and 4.67 min extraction time. The superimposed contour maps for maximizing the three dependent variables indicated that the MAE condition ranges were 75150 W, 4060% ethanol and 3.55.0 min. The predicted values at the optimized conditions (6.72% total yield, 408.65 mg% total catechin, and 83.33% electron donation ability) were similar to the experimental values. The optimized MAE (112.5 W, 50% EtOH, 4.2 min) was more efficient than the conventional solvent extraction using 80% EtOH, $60^{\circ}C$ for 3h and 150 rpm.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.299-303
• /
• 2014

This study was to comparative analysis that different methods of extraction about total sugar content which the major functional components of edible and medicinal mushrooms. Through the phenol-sulfuric acid method was measured that Hot water extraction, acid extraction, and alkaline extraction. Drawing the standard curve to obtain the concentration of the glucose solution and the sample by applying the measured absorbance on the standard curve. Total sugar contents was measured after extraction with different solvents.(Hot water, 70% EtOH, 80% MeOH). The level of total sugar in Cordyceps militaris is highest in the hot water extraction with 658.4(${\mu}g/g$) and Coriolus versicolor in 649.7(${\mu}g/g$) and 679.0(${\mu}g/g$) was found as the highest in the acid extraction and the alkaline extraction. C. militaris and ASI 7025 showed the highest level in the hot water extraction. Finally, C. versicolor, Sparassis crispa showed that higher than the other mushrooms at the 1hr, 2hr microwave extraction. It was varied total sugar content according to the different extraction solvent and the extraction method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.3
• /
• pp.348-354
• /
• 2007

Extraction characteristics of ginger (Zingiber officinale) and the functional properties of the corresponding extracts were monitored by the response surface methodology (RSM). The maximum extraction yield of 38.83% was obtained under the specific extraction conditions, such as microwave power of 126.68 W, ethanol concentration of 53.39% and extraction time of 8.15 min. The maximum electron donating ability (EDA) was found as 77.92% at the conditions of 58.25 W microwave power, 91.87% ethanol concentration and 5.54 min extraction time. The maximum inhibitory effect on tyrosinase was 79.39% at 106.08 W, 2.06% and 5.61 min. The maximum polyphenol content was 105.59% under the extraction conditions of 81.82 W, 99.52% and 4.06 min. Based on superimposition of four dimensional RSM with respect to extraction yield and electron donating ability and polyphenol content obtained under the various extraction conditions, the optimum ranges of extraction conditions were found to be microwave power of $0{\sim}80\;W$, ethanol concentration of $0{\sim}40%$ and extraction time of $3{\sim}7$ min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.105-110
• /
• 2007

Extraction characteristics of onion (Allium cepa) and the functional properties of corresponding extracts were monitored by the response surface methodology (RSM). The maximum extraction yield of 44.02% was obtained under the specific extraction conditions, such as microwave power of 143.13 W, ethanol concentration of 61.77% and extraction time of 3.39 min. The maximum electron donating ability (EDA) was found as 45.85% at the conditions of 143.55 W microwave power, 27.52% ethanol concentration and 4.86 min extraction time. The maximum inhibitory effect on tyrosinase was 65.40% at 132.29 W, 36.47% and 7.62 min. The maximum superoxide dismutase (SOD)-like activity was 69.84% under the extraction conditions of 99.41 W, 8.47% and 7.13 min. Based on superimposition of four dimensional RSM with respect to extraction yield, electron donating ability and SOD-like activity obtained under the various extraction conditions, the optimum ranges of extraction conditions were found to be microwave power of 0$\sim$120 W, ethanol concentration of 70$\sim$80% and extraction time of 2$\sim$10 min.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.192-198
• /
• 2023

In this study, the components of microwave-assisted extracts obtained from Thuja orientalis leaves were analyzed, and the cytotoxicity, antibacterial and antiviral activities were evaluated. The predominant components from microwave-assisted extraction were catechin, leucopelargonidin, arecatannin, quinolone, and kaempferol derivatives, which are classified in the flavonoid and tannin groups. We observed that the 0.11 mg/mL of extract concentration did not show cytotoxicity in HaCaT cells. The antibacterial activities were tested according to the guidelines of methods for determining the bactericidal activity of antimicrobial agents. The extracts showed 99.9% antibacterial efficiency against gram-positive S. aureus, while the antibacterial effect on gram-negative E. coli was insignificant. When the extract concentration and contact time with bacteria were increased, 99.9% antibacterial efficiency was observed for E. coli as well as S. aureus. Following the standard to assess the activity of microbicides against viruses in suspension (ASTM-E1052-20), the antiviral efficiency was more than 99.99% for influenza A (H1N1) and SARS-CoV-2. These results suggest its potential use in antiviral disinfectants, surface coatings, personal protective equipment, and textiles.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.128-135
• /
• 2007

Micro-channels for a wave micropump have been fabricated using the Stereolithography and UV Photolithography. The micro-channel with a channel height of $500\;{\mu}m$ was fabricated with stereolithography. UV photolithography was used for producing micro-channels with a channel length less than $100\;{\mu}m$. The fabrication process data including spinning rpm, pre-bake and post-bake time, and develop time for single layer and multiple layer 3D micro-structures using SU-8 photo resist are experimentally found. A film mask printed with a 40,000 dpi laser printer was used for UV lithography and micro-structures in the order of tens of micrometers in dimension were successfully fabricated.