• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1474-1482
• /
• 1994

In order to study the influence of a circular inclusion on a stress field neat a crack tip, mutual interference of a crack and the circular inclusion is analyzed by using the two dimensional boundary element method program made for the analysis of a bimaterial inclusion. The stress intensity factor of an inclusion which has small stiffness is a little greater than that of large stiffness in the near-by crack tip, and similar values tends to appear for distant crack tips. A line crack shows the repetition phenomena which caused by stress mutual interference depending on the radius and stiffness of an inclusion, and the repetition phenomena becoms weak in the inclusion which has large stiffness. Stress mutual interference shows repetition phenomena after extension of a line crack by the length of the radius of the inclusion which has small stiffness.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.120-129
• /
• 1994

생쥐의 배우자간 인식과 수란관과 난자의 상호작용을 연구하기 위하여 수정 전후의 난자와 배아에 형광으로 표지된 5가지 렉틴(UEA-1. LCA, PNA RCA-1, GSL-1)을 처리하여 투명대, 위낭강 원형질 막에서 렉틴의 결합양상을 관찰하였다. 미수정난자 및 수정란의 투명 대에는 UIA-1을 제외한 4가지 렉틴이 결합하였다. PNA RCA-1, GSL-1은 투명대의 의총보다 내층에 강하게 결합되었고 UEA-1과 LCA는 투명대의 전층에서 미약하지만 고르게 결합하였다 배란된 난자의 위난강은 LCA와 PNA에 의해 결합되었으며 UEA-1은 수정 이후부터 GSL-1은 2-세포기 이후부터 위난강에 결합하였다. 난구세포를 제거하고 체외성숙을 일으킨 난자의 위난강에는 5가지 렉틴 모두 결합하지 않았다. 난자와 배아의 원형질막은 PNA. RCA-1, GSL-1에 의해 결합되었고, LCA 및 UEA기은 수정 이후부터 원형질막에 결합하였다. 이상의 결과에서 glucosamine, N-acetylgalactoamine 관기를 함유한 물질이 난구세포에서 생성되어 위난강에 축적되며 배란 후부터 난자의 위난강내 탄수화물관기는 수란관내액의 영향을 받는 것으로 사료된다. 난자 투명대의 탄수화물관기는 내층에 밀집되어 분포하는데 이는 정자의 투명대 관입 조절과 관련된 것으로 사료된다. 수정 후 난자의 원형질막 표면에 fucose와 mannose 등의 탄수화물 잔기가 새로이 노출되며 초기배아 발생동안 위난강에 존재하는 구조물의 렉틴 결합 특성이 유지되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.501-503
• /
• 2007

오호츠크해 사할린 북동 해저사면지역은 세계적인 가스수화물 산출지역으로 알려져있다. 이미 2005년 탐사에서 50 cm 두께의 순수 가스수화물 시료를 해저면에서 채취한 지역이다. 2006년 탐사에서는 다양한 주파수대역의 고해상도 지구불리장비를 사용하여 탐사를 실시하였다. Side-scan Sonal와 3.5 kHz SBP 탐사, 수중음향 탐사를 통해 대규모 하도구조가 가스수화물지역의 북쪽 경계를 형성하고 있음을 밝혔다. 가스수화물의 BSR은 수심에 얕아짐에 따라 계속해서 심도가 감소하여 수심 약 300 m에서 해저면에 다다름. 이는 연구지역에서의 가스수화물 안정대의 상부경계가 약 300 m임을 시사한다 가스수화물 분출구조들은 약 1000m 수심을 경계로 천부에 분포하고, 해저면에는 원형의 가스분출구조들이 특징적으로 나타난다. 반면에 1000 m 수심보다 깊은 지역에서는 mud-dirpir의 상승구조로 판단되는 상승구조들이 해저면에 굴곡지형을 형성하고 있다. 해수중으로 분출하는 가스기둥들은 수심 111.2 m에서 1226.4 m 지점까지 다양한 수심에서 분포하며, 상승높이는 최대 750 m에 이르며, 약 150 m 수심까지 도달한다. 이는 해저에서 분출되는 메탄가스가 해수에 흡수되지 않고 해수면까지 이동하여 대기중으로 발출될 수 있음을 시사한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.137-145
• /
• 1997

A two-dimensional program for the analysis of bimaterial inclusion has been developed using the bound- ary element method. In order to study the effects of circular inclusion on the stress field of the crack tip, numerical analysis was performed for the straight crack of finite length around the symmetric circular inclusion whose modulus of elasticity was different from that of the matrix material. In the case of inclusion whose stiffness was smaller than that of the matrix material, the stress intensity factor was found to increase as the crack enamated. The stress intensity factor was uninfluenced from the radial change in inclusion and remained constant for the stiffness equivalent to the matrix materials, where as it decreased for the inclusion with larger stiffness. For the vareation in the distance of the inclusion, a small increase in the stress intensity factor was observed for the case with small or equal stiffness compared with the matrix materials. The inclusion with larger stiffness showed a gradual decrease in the strss intensity factor as the crack emanated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.56-66
• /
• 2017

In this study, seismic strengthening performance of RC circular columns reinforced with high ductile PET and hybridized fibers(HF, PET + aramid) strand was experimentally compared and investigated. As a result, the maximum flexural strength and ductility capacity of all reinforced columns were improved than control column and fiber rupture did not occur at the ultimate stage. In addition, the resistive strength and displacement of the PET sheet 25 layers reinforcing column and the HF strand 1 layer reinforcing column were almost similar, so that 1 layer of HF strand showed the same lateral confinement effect as the PET sheet 25 layers. As a result of this experimental study, PET is considered to be suitable as seismic reinforcement material for RC structures in terms of flexural strength and ductility. However, in order to increase the possibility of application in the field, it is necessary to use a prefabricated PET sheet such as HF used in this study. The durability of PET needs investigation in the future.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2000

이 연구에서는 대동층군 탄질 점판암내에 산출하는 탄질물의 미세구조를 고분해능 투과전자현미경(HRTEM)을 이용하여 조사하였다. 관찰된 탄질물은 구조가 부분적으로 흑연화된 흑연화과정의 초기단계 물질로서$ 100\AA$ 이하의 매우 얇은 크기로 일라이트 결정들의 경계면 사이나 일라이트 결정내에 협재되어 나타난다. 탄질물의 층상구조는 휘어있거나 불연속적이며, 부분적으로 원형조직을 보이는 "지문" 조직을 이루고 있다. 이러한 특징은 많은 결함구조를 가지고 구조적으로 충분히 흑연화되지 않은 물질에서 볼 수 있는 전형적인 구조다. 미세한 규모로 협재된 조직을 보이는 탄질물은 퇴적물의 속성작용과 저변성작용시 일라이트가 성장하는 동안에 포획되었거나, 또는 일라이트 이전의 점토광물내에 흡착되었던 물질들로부터 유래된 것으로 보인다. 이처럼 탄질물과 일라이트가 미세한 규모로 협재되어 산출하는 특징은 저변성암에서 일어나는 흑연화작용시 복잡한 미세구조의 변화가 수반되었음을 지시한다. 다양한 미세구조를 보여주는 흑연질 물질의 산출은 탄질물이 고온에서 균질한 흑연으로 생성되기까지 불연속적인 단계를 거쳐 반응할 가능성을 지시한다. 끝으로, 이 연구는 이온 빔을 이용하여 제작한 시료를 관찰함으로써 암석내에 함유된 탄질물들의 조직을 훼손하지 않고 관찰할 수 있음을 보여준다.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.86-101
• /
• 2012

The constituting rocks of Multi-storied Round shape stone Pagoda of Unjusa Temple are lithic tuff and rhyolite tuff breaccia which show green or grey and also rock fragment with poor roundness are present in the structure. lithic tuff is composed of feldspar and quartz which are glassy texture and cryptocrystalline and also micro crystalline are scattered. phenocryst quartz and feldspar in the substrate composed of feldspar and opaque minerals are found in rhyolite tuff breaccia. dust, exfoliation, cavity, fracture and crack are observed in all the stone of the pagoda and the result of Infrared Thermography shows partial inter cavities have developed severely which may cause further exfoliation. In addition, a great deal of various grey, green, and yellow brown lichen as well as bryophyte are present at the upper part of eastern and western roof stone located above the third floor. Discolors remarkably shown at stereobate and roof stone are identified as inorganic pollutants such as manganese oxide, iron oxide and iron hydroxide. The stone of the pagoda of the Chemical Index of Alteration (CIA) and the Weathering Potential Index (WPI) are 55.69 and 1.12 respectively and this corresponds to a highly weathered stage. The measured values, average ultrasonic velocity 2,892m/s, coefficient of weathering 0.4k and compressive strength $1,096kg/cm^3$, suggest that the rock strength and durability are weakened.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.374-378
• /
• 2007

Water-soluble terpolymer of acrylamide, diacetone acrylamide, and acrylic acid was prepared by redox initiators in aqueous medium. One component photoresist was synthesized by reaction of terpolymer with 4-azidoaniline. By blending the aqueous acrylamide/diacetone acrylamide copolymer solution with bisazide, 4,4'-diazidostilbene -2,2'-disulfuric acid sodium salt, two component photoresist was prepared. The photosensitivity per azido group unit mole of one component photoresist was 4 times higher than that of two component photoresist. The dot-type pattern was successfully achieved with one component photoresist at low exposure energy, which is prospective to be used as black matrix negative photoresist.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.303-310
• /
• 2000

Ultrastructures on the integumentary epidermis of the marbled sole, Limanda yokahamae, were examined by means of the light and transmission electron microscope. Epidermal layer consists of supporting cells, unicellular glands and accessory cells. The supporting cells were classified into superficial cell, intermediated cell and basal cell. The cytoplasm of supporting cells is divided into cortex and medullar part. In the cortex and medullar part, microfilaments and cell organelles are well developed, respectively. Gland cells are present in the superficial and middle epidermis. The cytoplasm of mucous cell reacted to blue in AB-PAS (pH 2.5). Club cell has a roundish central vacuole and well-developed microfilaments in the cytoplasm. Granular cells are occurs in the middle and basal epidermis , and the cytoplasm is occupied with membrane-bounded granules of electron dense. Chloride cells are present in the superficial epidermis , and the cytoplasm is occupied with tubular mitochondria. Three types of pigment cells can be distinguished by electron density of cytoplasmic inclusions.