• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1125-1146
• /
• 2018

Segment lining applied to the TBM tunnel is mainly made of concrete, and it requires sufficient structural capacity to resist loads received during the construction and also after the completion. When segment lining is design to the Limit State Design, both Ultimate Limit State (ULS) and Service Limit State (SLS) should be met for the possible load cases that covers both permanent and temporary load cases - such as load applied by TBM. When design segment lining, it is important to check structural capacity at the joints as both temporary and permanent loads are always transferred through the segment joints, and sometimes the load applied to the joint is high enough to damage the segment - so called bursting failure. According to the various design guides from UK (PAS 8810, 2016), compression stress at the joint surface can generate bursting failure of the segment. This is normally from the TBM's jacking force applied at the circumferential joint, and the lining's hoop thrust generated from the permanent loads applied at the radial joint. Therefore, precast concrete segment lining's joints shall be designed to have sufficient structural capacity to resist bursting stresses generated by the TBM's jacking force and by the hoop thrust. In this study, bursting stress at the segment joints are calculated, and the joint's structural capacity was assessed using Leonhardt (1964) and FEM analysis for three different design cases. For those three analysis cases, hoop thrust at the radial joint was calculated with the application of the most widely used limit state design codes Eurocode and AASHTO LRFD (2017). For the circumferential joints bursting design, an assumed TBM jack force was used with considering of the construction tolerance of the segments and the eccentricity of the jack's position. The analysis results show reinforcement is needed as joint bursting stresses exceeds the allowable tensile strength of concrete. This highlights that joint bursting check shall be considered as a mandatory design item in the limit state design of the segment lining.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.97-106
• /
• 2018

This study aimed at examining the suitability of $Tenax^{(R)}$ for the migration testing of food packaging materials, which is currently approved in the EU as a dry food simulant. The results are used as a basis to examine the feasibility of introducing $Tenax^{(R)}$ to Korean regulation. The OMVs of test specimen into various solvents (diethyl ether, ethanol, pentane, and acetone) after exposure to $100^{\circ}C$ for 1 hr were compared. Diethyl ether showed the highest OMV ($1.33mg/dm^2$) among the solvents tested. When the tests were conducted with different amounts of $Tenax^{(R)}$ of 2, 4, or 8 g per specimen, the OMVs were 0.75, 1.33 and $1.40mg/dm^2$, respectively. The OMV obtained with a closed system after wrapping with aluminum foil showed a significantly higher OMV ($1.61mg/dm^2$) than that without aluminum wrapping ($1.318mg/dm^2w$) and an open system without lid ($1.06mg/dm^2$). The specific migration rates of surrogates spiked in the polyethylene test film and paper samples into $Tenax^{(R)}$ were compared with those into liquid food simulants including 95% ethanol and n-heptane, and actual foods such as starch, skim milk, and sugar. In general, the specific migration levels of surrogates into $Tenax^{(R)}$ were similar compared with n-heptane, however those were significantly higher than into actual foods. These results suggest that $Tenax^{(R)}$ may be used as a food simulant for the long-term preservation of dried foods and paper products. However, more studies need to be conducted to investigate the factors influencing the migration into $Tenax^{(R)}$, such as the types of foods and packaging materials tested, migration conditions, and surrogates properties etc.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.1-10
• /
• 2022

Irrigation water supplied to the paddy field is consumed in the amount of evapotranspiration, underground infiltration, and natural and artificial drainage from the paddy field. Irrigation return flow is defined as the excess of irrigation water that is not consumed by evapotranspiration and crop, and which returns to an aquifer by infiltration or drainage. The research on estimating the return flow play an important part in water circulation management of agricultural watershed. However, the return flow rate calculations are needs because the result of calculating return flow is different depending on irrigation channel water loss, analysis methods, and local characteristics. In this study, the irrigation return flow rate of agricultural watershed was estimated using the monitoring and SWMM (Storm Water Management Model) modeling from 2017 to 2020 for the Heungeop reservoir located in Wonju, Gangwon-do. SWMM modeling was performed by weather data and observation data, water of supply and drainage were estimated as the result of SWMM model analysis. The applicability of the SWMM model was verified using RMSE and R-square values. The result of analysis from 2017 to 2020, the average annual quick return flow rate was 53.1%. Based on these results, the analysis of water circulation characteristics can perform, it can be provided as basic data for integrated water management.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.232-239
• /
• 2023

This study was to evaluate the values of Korean native sweet sorghum as a new feed crop for ruminants. Sweet sorghum was the Muan native species (Bioenergy Crop Research Center, National Institute of Crop Science), and cultivated from May to October 2021 at Sangji University (Wonju-si, Gangwon-do, Korea). There were a non-treated group (Con), a recommended amount treatment (RD) and a treatment with double the recommended amount (Double RD) by an oil cake fertilizer. Plant height was measured at weekly intervals for 12 weeks after planting sweet sorghum seedlings, and was a significant difference in the order of Double RD, followed by RD and Con in 7 weeks (p<0.05). Feed values and sugar contents were measured in 7, 9, and 11 weeks. Crude protein of Double RD was higher than that of the other treatments in 7 and 9 weeks (p<0.05). Crude fat was higher at Double RD than the other one in 9 weeks (p<0.05). ADF and NDF of Double RD were higher than the other one (p<0.05). When it was compared to corn and sudangrass hybrids grown on farms, Crude protein was lower in sweet sorghum than other crops (p<0.05), and crude fat was higher in sweet sorghum than corn (p<0.05). Crude fiber, ADF and NDF were higher in sweet sorghum compared to corn and sudangrass (p<0.05). The sugar contents of sweet sorghum were 4.07 ± 0.12~7.63 ± 0.21 brix, and showed higher than corn and sudangrass hybrid (p<0.05). The rumen in situ digestibility of sweet sorghum was 30.73~38.13% at the 9th and 11th weeks, and showed higher than that of corn and sudangrass hybrids (p<0.05). Therefore, it is considered that Korean native sweet sorghum has sufficient value as a new forage crop for ruminants, and good value as yield, nutrients and digestibility, when the grass height is 273.33~332.50 cm.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.165-174
• /
• 2009

Background: With the advances of cardiac surgery, the demand for an artificial prosthesis has increased, and this has led to the development and utilization of diverse alternative materials. We conducted this research to improve an artificial prosthesis by examining the changes of the physical qualities, the pressure related tensile strength, the change in elasticity and the thermostability of a xenograft valve (porcine) and pericardium (bovine, porcine) based on the type of fixation liquid we used. Material and Method: The xenograft valves and pericardium were assigned into three groups: the untreated group, the fixed with glutaraldehyde (GA) group and the glutaraldehyde with GA+solvent such as ethanol etc. group. The surgeons carried out each group's physical activities. Each group's uniaxial tension and elasticity was measured and compared. Thermostability testing was conducted and compared between the bovine and porcine pericardium fixed with GA group and the GA+solvent group. Result: On the physical activity test in the surgeon's hand, no significant difference between the groups was sensed on palpation. For suture and tension, the GA+solvent group was slightly firmer than the low GA concentration group. In general, the circumferential uniaxial tension and elasticity of the porcine aortic and pulmonary valves were better in the fixed groups than that in the untreated group. There was no significant difference between the GA and GA+solvent groups (p>0.05). Bovine and porcine pericardium also showed no significant difference between the GA group and the GA+solvent group (p>0.05). When comparing between the groups for each experiment, the elasticity tended to be stronger in most of the higher GA concentration group (porcine pulmonary valve, porcine pericardium). On the thermostability testing of the bovine and porcine pericardium, the GA group and the G+solvent group both had a sudden shrinking point at $80^{\circ}C$ that showed no difference (bovine pericardium: p=0.057, porcine pericardium: p=0.227). Conclusion: When fixing xenograft prosthetic devices with GA, adding a solvent did not cause a loss in pressure-tension, tension-elasticity and thermostability. In addition, more functional solvents or cleansers should be developed for developing better xenografts.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.698-708
• /
• 2018

The purpose of this study was to investigate differences in the breeding call characteristics of cicada species found in urban and forest areas in the central region of Korea by examining the interspecific effects and environmental factors affecting the breeding calls and breeding call patterns. The selected research sites were Gyungnam Apartment in Bangbae-dong, Seoul for the urban area and Chiak Mountain National Park in Wonju for the forest area. The research method for both sites was to record cicada breeding calls for 24 hours with a recorder installed at the site and analyze the results. Data from the Korea Meteorological Administration were used for environmental factors. The research period was from June 19, 2017 to September 30, 2017. As a result of the study, there were differences in the emergence of species between the two research sites: while Platypleura kaempferi, Hyalessa fuscata, Meimuna opalifera, Graptopsaltria nigrofuscata, and Suisha coreana were observed at both sites, Cryptotympana atrata was observed in the urban area and Leptosemia takanonis in the forest area only. The emergence periods of cicadas at the two sites were also different. The activities of P. kaempferi and L. takanonis were noticeable in the forest area. In the urban area, however, L. takanonis was not observed and the duration of activity of P. kaempferi was short. In the urban area, C. atrata appeared and sang for a long period; H. fuscata, M. opalifera, and G. nigrofuscata appeared earlier than in the forest area. S. coreana appeared earlier in the forest area than in the urban area. According to the daily call cycle analysis, even cospecific cicada showed a wide variation in their daily cycle depending on the region and the interspecific effects between different cicadas, and the environmental differences between the urban and forest areas affected the calls of cicadas. The results of correlation analysis between each cicada breeding calls and environmental factors of each site showed positive correlation with average temperature of most cicadas except P. kaempferi and C. atrata. The same species of each site showed positive correlations with more diverse weather factors such as solar irradiance. Logistic regression analysis showed that cicadas with overlapping calling times had significant effects on each other's breeding calls. C. atrata, which appeared only in the urban area, had a positive effect on the calling frequency of H. fuscata, M. opalifera, and G. nigrofuscata, which called in the same period. Additionally, L. takanonis, which appeared only in the forest area, and P. kaempferi had a positive effect on each other, and M. opalifera had a positive effect on the calling frequency of H. fuscata and G. nigrofuscata in the forest area. For the environmental factors, the calling frequency of cicadas was affected by the average temperatures of the urban and forest areas, and cicadas that appeared in the forest area were also affected by the amount of solar radiation. According to the results of statistical analysis, urban cicadas with similar activity periods are influenced by species, especially with respect to urban dominant species, C. atrata. Forest cicadas were influenced by species, mainly M. opalifera, which is a forest dominant species. The results of the meteorological impact analysis were similar to those of the correlation analysis, and were influenced mainly by the temperature, and the influence of the insolation was more increased in the forests.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.10-19
• /
• 2015

Purpose: The aim of the present study was to evaluate the long-term survival of implants retrospectively and determine the risk factors associated with implant failure. Materials and Methods: Of all implants that were placed at the Department of Periodontology of the Dental Hospital of Gangneung-Wonju National University from January 1998 to December 2012, 2265 implants that were followed up until June 2013 were included in this study. Data were collected from clinical and radiographic examinations from previous visits. The information gathered included gender, age, smoking status, implant diameter, implant length, surface of implant, location of implant within the dental arch, surgical techniques and existence of complications. Results: The survival rate before loading was 98.9%. The cumulative survival rate after 5 years of loading was 97.2%, and after 15 years of loading was 95.2%. In a simple logistic regression analysis, gender (P = 0.016), smoking status (P = 0.001), location of implant (P = 0.020) and existence of complications (P = 0.002) were statistically associated with implant failure and included in the multiple regression analysis. As a result of multiple logistic regression analysis, the variables statistically associated with implant failure (P < 0.05) were smoking status (P = 0.049) and existence of complications (P < 0.001). Conclusion: The cumulative survival rate of dental implants after 15 years of loading was 95.2% and that the variables statistically associated with implant failure were smoking status and existence of complications.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.231-238
• /
• 1995

Tc-99m-MIBI (Sestamibi) myocardial SPECT along with TI-201 tomographic Imaging has demonstrated wide application and high image quality sufficient for the diagnosis of myocardial perfusion defect, which consequently reflects regional myocardial blood flow. The qualitative values of myocardial SPECT with Tc-99m-MIBI as well ds the quantitative cases depend in some degree on the reconstruction techniques of multiple projections. Filtered backprojection (FBP) Is the common standard method for reconstruction rather than the complicated and time-consuming arithmetic methods. In FBP it is known that the distribution of radioactivity in reconstructed transverse slices varies with the selected litter parameters such as cutoff frequencies and order (Butterworth case) The cutoff frequencies used in clinicAl practice partially remove and decrease the true radioactive distribution and alter the pixel counts, which lead to underestimation of true counts in specific myocardial regions. In this study, we have investigated the effect of cutoff frequencies of reconstruction filter on the artifactually induced perfusion defects, which are often demonstrated near inferior and/or inferoseptal cardiac walls due to the intense hepatic uptake of Tc-99m-MIBI. A computerized method for Identifying the relative degree of artifactual perfusion defect and for comparing those degrees along with the relative amount of hepatic uptake to myocardium was developed and patient images were studied to observe the quantitative degree of underestimation of myocardial perfusion, and to propose some reasonable threshold of cutoff frequency in the diagnosis of perfusion defect quantitatively. We concluded that from the quantitative viewpoint cutoff frequencies may be used as high as possible with the sacrifice of homogeneity of image quality, and those frequencies lower than the common 0.3 Wyquist frequency would reveal severe degradation of radioactive distribution near inferior and/or inferoseptal myocardium when applying Butterworth or low pass filter.

• Journal of Korean Society of Forest Science
• /
• v.78 no.1
• /
• pp.55-60
• /
• 1989

To find the nutritive values of the edible bamboo shoot (Playllostachys edulis) produced in Korea, the component analysis was conducted using the fresh and canned bamboo shoot. As the principal component ; water, protein, lipid, sucrose, ash, cellulose and calorie content were measured in fresh bamboo shoot and canned bamboo shoot. Also the content of minerals ; K, P, Ca, Fe and Vitamins were analysed and compared between fresh and canned bamboo shoot. The contents of component were devided into upper, middle and bottom bamboo parts. The contents of protein, lipid, ash, cellulose and calories of raw bamboo shoot were higher than those of canned shoot. Generally, the components of bamboo shoot produced in Korea were not significantly different to those of Ueda's results in Japan. But the contents of lipid, calcium and potassium were higher in Korean bamboo shoot.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.1
• /
• pp.37-42
• /
• 1985

Recently the method using fixing biological contactor in treatment of sewage and wastewater has been propelling on the ground that it has advantages of reducing both motive and man power and applied treatment plants of this method are increasing gradually in Korea. After analysing the results from which real structure pilot plant had operated in the field with RBC sewage wastewater system-one of the fixing biological contact methods-for five months, this study was performed to investigate how to apply the standard of establishment that provided in article of sewage disposal facilities notified (act 8 of art 84) by the office of environment on May 16, 1984, to real treatment plant. The rotating velocity and the staying time of rotating disc have interrelation on removal efficiency of BOD. When circumferential velocity of rotating disc was ranged from 18 to 20 m per minute, economical price was the best. When the staying time was even about 120 minutes for that of home RBC facilities showed 90% or above of BOD removal efficiency of high concentration sewage also showed excellent efficiency ranged from about 85% to 90%.