• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.678-685
• /
• 2007

We implemented the network synchronization equipment for the optical transmission platform or next generation Packet/TDM(Time Division Multiplexing) data converged switching system and then, presented an impact of wander generation on the NG-SDH optical transmission network.

• Digital Contents
• /
• no.10 s.149
• /
• pp.24-25
• /
• 2005

남중수 KT 사장은 지난달 7일 서울 프레스센터에서 취임 후 첫 기자간담회에서 민영 2기 KT의경영기조로내세운‘ 원더(Wonder) 경영’을전면에내세우며특유의경영론을밝혔 다. 남사장은실제로이날‘ PCS 재판매시장점유율6.2% 동결’, ‘ 국내1위영화사인싸 이더스지분출자를통한디지털콘텐츠시장진출’등획기적인경영목표들을발표했다.

• 월간 기계설비
• /
• no.5 s.202
• /
• pp.101-104
• /
• 2007

인간의 성공과 행복은 스스로 어떻게 하느냐에 달려있다. 끈기와 집념, 성실과 근면, 정직과 선의, 박애와 상조, 시간관리와 끊임없는 자기계발 등…. 다시 말해 스스로 행복해지고 성공할 수 있다는 신념이 인간의 행복과 성공을 만든다. 어느 시대를 막론하고 사람들 중 일부는 국가나 제도의 힘을 빌려 행복과 성공을 보장 받으려 할 뿐 스스로 성취하려 하지 않는 경향이 있다. 이번 달부터 이런 낡은 정신에서 벗어나 보다 고양된 자세를 통해 삶을 깊이 있게 다듬어 나간 사람들의 이야기를 싣는다.

• Tribology and Lubricants
• /
• v.38 no.4
• /
• pp.170-178
• /
• 2022

Mechanical surface treatment is an excellent approach widely used to modulate and improve the performance and service life of bearings, gears, and frictional joints. The main purpose of this study is to investigate and compare the effect of ultrasonic nanocrystal surface modification (UNSM) and wonder process craft (WPC) on the surface and tribological properties of SUJ2 bearing steel. The surface roughness and hardness of the untreated and treated (UNSM- and WPC-treated) specimens were measured and compared. Their tribological properties were evaluated using a micro-tribometer under grease-lubricated and dry conditions against itself. Surface hardness measurement results revealed that both the UNSM- and WPC-treated specimens had a higher hardness than that of the untreated specimen. The surface roughness of the untreated specimen was reduced after UNSM and WPC treatments. Abrasive wear mode was observed on the surface of the specimens worn under grease-lubricated conditions, while adhesive wear mode was found on the surface of the specimens worn in dry conditions. According to the tribological test results, the friction coefficient and wear rate of the untreated specimens were reduced by the application of both the UNSM and WPC treatments under grease-lubricated and dry conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.89-94
• /
• 2006

Premature failures in pavements are frequently reported due to rapid increasement in traffic volume, heavy vehicles, and high temperature in the summer. Based on this concept in mind, Korea Highway Corporation established the Test Road Operation Center to estimate the pavement performance. To evaluate the pavement performance effectively using the field data, wandering is an important topic in pavement analysis. In this study, portable wandering system was developed and analyzed to investigate the pavement responses due to the dynamic truck passes, and analyzed the wandering to dynamic load test. The test results revealed that the advantages of laser devices were noticeable compare to the other measuring ones. To understand the behavioral characteristics of pavements using the wandering measurement devices, dynamic truck tests were conducted in the field. Test results showed that the effects of wandering on asphalt pavement were significant. The data analysis using this wandering effect is considered as an important tool in performance analysis of asphalt concrete pavement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.305-315
• /
• 2007

In this paper, We generated a wander generation model from really measured clock noise data on the transmission node and DOTS in NG-SDH network. and then, We presented the performance of Synch. clock and maximum node level capable network configuration through the clock characteristics simulation on network having the steady-state clock.

• The KIPS Transactions:PartC
• /
• v.8C no.3
• /
• pp.299-310
• /
• 2001

동기망과 동기식 전송망을 설계할 때에는 동기클럭의 단기안정 클럭특성과 이에 따른 망구성 노드수가 중요하게 고려되어야 할 사항이다. 또한 동기망과 전송망을 동시에 고려하여야 한다. 만일 전송망 만을 고려한다면 동기망에서의 발생할 수 있는 클럭성능 저하를 반영시킬 수 없기 때문이다. 지금까지의 연구는 주로 동기식 전송망만을 적용하여 연구되었다. 본 논문에서는 동기망과 동기식 전송망을 통합 고려하고, 최악의 원더생성을 적용하였을 때의 세가지 클럭상태에 따른 망동기클럭의 MTIE와 TDEV 특성을 얻었다. 또한 현 ITU-T 규격을 적용하여 세 가지 클럭상태에 따른 최대 망 구성 노드수를 구하였다.

• Journal of Engineering Education Research
• /
• v.20 no.5
• /
• pp.23-33
• /
• 2017

It is examined that how flipped learning and mind-wandering affect an idea generation task. For the purpose, the participants in the idea generation task are divided into two groups to learn SIT(Systematic Inventive Thinking) and BCC(Business Creativity Codes) as idea generating tools in advance. One group learned the tools in a classroom, and the other group through an online education program. The creativity level of an idea is evaluated in the dimensions of originality, practicality, and realizability. The creativity levels of the ideas from the two groups are not statistically different in all the three creativity dimensions. To examine the effect of mind-wandering, another group generated ideas two hours a day in four days instead of eight hours in one day. The creativity levels of the ideas from the third group are higher in the dimensions of originality and practicality. This shows that the effectiveness of flipped learning is not so different from the face-to-face learning in a classroom, and mind-wandering has a positive effect in the learning.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.123-134
• /
• 2004

The synchronized clock performance in the synchronization network and SDH transmission network design is an important element in aspect of guaranteeing network stability and data transmission. Consequently the simulator which can applicable various parameters and several input levels from the best state to the worst state for performance analysis of the synchronized clock is required in case of network design. Therefore, in this paper, 1 developed the SNCA and TNCA for analysis of the synchronized clock in the synchronization network and transmission network. And utilizing these simulators with various wander generation, node number and clock state, 1 obtained the synchronized clock characteristics and maximum network nodes In NE1, NE2 and NE3 transmission network and DOTS1, DOTS2 synchronization network.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.169-175
• /
• 2014

NG-SDH system is connected with networks throughout optical fibers. Network synchronization controller is a necessary for the data synchronization in each optical transmission system. In this paper, we have design and implementation the network synchronization controller using SOPC(system on a programmable chip) design technic. For this network synchronization controller we use FPGA in Altera. FPGA includes 32bit CPU, DPRAM(dual port ram), digital input/output port, transmitter and receiver framer, phase difference detector. We also confirm that designed network synchronization controller satisfies the ITU-T G.813 timing requirements.