• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.941-944
• /
• 2003

This paper implement Telemetry System which is used Bluetooth. This System propose system which can detect a total amount of gas, electricity or water without a motorman, at home. BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self - error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the snail size is present. And, Motorman who use mobility of embedded system can detect detect a total amount of gas, electricity or water outdoor. Embedded system use ARM processor that is low power processor. So it ran use long time efficiently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.67-71
• /
• 2007

Recently, a health care need according to the increase of an advanced age population is increasing. The requirement about a health care monitoring is increasing rapidly from general people as well as patient. The requisition about a medical treatment technique and a medical treatment information service is the trend to be expanding. That can be possible minimizing the inconvenience of the patient to take a medical service and continuously monitoring the status of the patient to take a health care service. This paper discusses an implementation of wireless physiological signal monitoring system for health care. The system are composed of the sensor node and monitoring program. The sensor node has the physiological signal measurement part and the wireless communication part. The remote monitoring system has a monitoring program that are communicating the sensor node using bluetooth. The sensor node measured the ECG, pulse wave, blood pressure, Sp02, and heart rate.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.63-69
• /
• 2005

Interferometric Synthetic Aperture Radar(InSAR) is a rapidly evolving technique. Spectacular results obtained in various fields such as the monitoring of earthquakes, volcanoes, land subsidence and glacier dynamics, as well as in the construction of Digital Elevation Models(DEMs) of the Earth's surface and the classification of different land types have demonstrated its strength. As InSAR is a remote sensing technique, it has various sources of errors due to the satellite positions and attitude, atmosphere, and others. Therefore, it is important to validate its accuracy, especially for the DEM derived from Satellite SAR images. In this study, Real Time Kinematic(RTK) GPS and Kinematic GPS positioning were chosen as tools for the validation of InSAR derived DEM. The results showed that Kinematic GPS positioning had greater coverage of test area in terms of the number of measurements than RTK GPS. But tracking the satellites near and/or under trees md transmitting data between reference and rover receivers are still pending tasks in GPS techniques.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.229-232
• /
• 2005

현재 디지털방송 서비스가 확대되고 있는 시점에서 방송콘텐츠 보호에 대한 중요성이 날로 부각되고 있다. 이에 MPEG-2 IPMP는 디지털방송 서비스를 제공받아 소비하는 방송 단말로부터 방송콘텐츠를 불법적으로 사용할 수 없도록 보호할 수 있게 정의하고 있는 대표적인 국제 표준 규격이다. IPMP 규격을 기반으로 한 방송 단말을 구현함에 있어 보호된 방송콘텐츠를 IPMP 툴로 처리하여 소비하게 되는데 만약 방송 단말에 IPMP 툴이 없다면 방송되고 있는 MPEG-2 전송스트림이나 원격지에서 필요한 IPMP 툴을 다운로드 받아 방송 단말에 업데이트를 시켜야 한다. 이때 방송 단말에서 위와 같은 기능이 구현되기 위해서는 구체적인 소프트웨어 설계 방식을 통해 다양한 플랫폼에 대해 구현된 기능에 대한 재사용성이나 호환성을 확보하는 것이 효율적이다. 하지만 점차적으로 복잡해지고 다양해지는 멀티미디어 기기들의 기능들을 위해 탑재되는 소프트웨어 역시 복잡해지고 있어 그 재사용성이나 호환성이 떨어지고 있는 실정이다. 본 논문에서는 이러한 소프트웨어의 재사용성이나 호환성을 최대한 보장할 수 있도록 현재 MPEG(ISO/IEC JTC1/SC29/WG11)에서 표준화가 진행 중인 MPEG Multimedia Middleware(M3W) 규격을 기반으로 한 소프트웨어 설계 방식을 살펴보고, 디지털방송 단말에서 IPMP 툴 업데이트 기능이 효율적으로 설계되고 구현될 수 있는 소프트웨어 구조를 제안하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2006

In this paper, we present a centralized monitoring system for infant incubator using Bluetooth. Conventional monitoring systems for incubators require large space and wire connection, which causes the spatial restrictions. To overcome this disadvantage, centralized monitoring system is proposed for infant incubators using Bluetooth. The implemented system consists mainly of transmission systems and receiver systems. There are temperature sensors, humidity sensors, ECG measurement units and Bluetooth modules in the transmission systems. For temperature, humidity and ECG data, the transmission systems acquire them from the measuring modules in the incubator and transmits the signals using Bluetooth. In the receiver system, users can see the status of the infant by accessing the central monitoring host computer. That is, one can monitor the information on the temperature and the humidity in the incubator and Infant's ECG without dependence to a conventional bulky system. Also, the system manager in the receiver system can maintain centralized monitoring of the situations in all incubators and infant. The developed system will be useful in remote diagnosis of infant incubator In various environments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.53-61
• /
• 2014

For monitoring the flight trajectory and the status of a launch vehicle, the mission control system in NARO space center process data acquired from the ground tracking system, which consists of two tracking radars, four telemetry stations, and one electro-optical tracking system. Each tracking unit exhibits its own tracking error mainly due to multi-path, clutter and radio refraction, and by utilizing only one among transmitted informations, it is not possible to determine the actual vehicle trajectory. This paper presents a way of generating flight trajectory via post-processing the data received from the ground tracking system. The post-processing algorithm is divided into two parts: compensation for atmosphere radio refraction and multi-sensor fusion, for which a decentralized Kalman filter was adopted and implemented based on constant acceleration model. Applications of the present scheme to real data resulted in the flight trajectory where the tracking errors were minimized than done by any one sensor.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.79-85
• /
• 2020

Recently, the RPAS(Remote Piloted Aircraft System), by remote control and autonomous navigation, has been increasing in interest and utilization in various industries and public organizations along with delivery drones, fire drones, ambulances, agricultural drones, and others. The problems of the stability of unmanned drones, which can be self-controlled, are also the biggest challenge to be solved along the development of the drone industry. drones should be able to fly in the specified path the autonomous flight control system sets, and perform automatically an accurate landing at the destination. This study proposes a technique to check arrival by landing point images and control landing at the correct point, compensating for errors in location data of the drone sensors and GPS. Receiving from the Google Map API and learning from the destination video, taking images of the landing point with a drone equipped with a NAVIO2 and Raspberry Pi, camera, sending them to the server, adjusting the location of the drone in line with threshold, Drones can automatically land at the landing point.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.992-995
• /
• 2015

In this paper, we developed the computer room environments and infrastructure management systems to operate various networking devices and the infrastructure in the room, stably. The developed systems are composed of the computer room environment management system and the computing infrastructure management system. The computer room environment management system performs the role which the temperature and humidity detection node periodically detects the temperature and humidity and transmits the information to the remote intelligent server. The computing infrastructure management system enables the computer room's manager to check the information and maintenance history of the computing devices with a smart device supporting NFC(Near Field Communication).

• Journal of Convergence Society for SMB
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2015

Recently the disease by eating of the modern prevention, management, and trends in the u-healthcare service that provides healthcare services including health promotion is changing rapidly. However, u-healthcare service is a healthcare information that provides users of the disease can not be analyzed even if the service is stored or not stored in the management server status is giving the inconvenience caused to users of the health services. In this paper, we propose a management method of health care services and a big data formation information that provides users of the disease to facilitate the users of health care services through the use magazine big data information regardless of time and place. The proposed method has the user's bio-information and the measured health information and transmits data through a wired or wireless communication to the medical institution and the user's health information data formation by the big user of the analysis of the health information and the disease of the user feedback to the user.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2011

Recently, due to people's incontinent use all over the world, fossil fuels such as coal, oil, and natural gas were nearly to be exhausted and also causes serious environment pollutions. Therefore, there is a strong need to develop solar, wind, hydro, biomass, geothermal to replace fossil fuels to prevent suffering from above problems. Wish advances in sensor technology, such data is collected as a kind of stream data which arrives in an online manner so that it is characterized as high- speed, real-time and unbounded and it requires fast data processing to get the up-to-date results. Therefore, the traditional data processing techniques are not fit to deal with stream data. In this paper, we propose a kalman filter-based algorithm to process renewable stream data.