• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.73-80
• /
• 2011

In this paper, we design and implementation of effective remote management system for VoIP(Voice over IP) terminal. Ordinary VoIP terminal is connected inside of NAT(Network Address Translation) assigned private IP address. NAT provides address mapping between outside public IP address and inside private IP address, for outside system telephone call is connected to inside VoIP terminal. In this paper, we also design and implementation of UDP hole punching function that the outside calls pass through the NAT, for outside management system call is connected to internal VoIP terminal, and gathered to management information of the VoIP terminal. Also, we evaluated and analysed of developed system in the test environment. As a result of test, It showed that it was well performed without any data error and data loss in the connectivity, and It showed that it was well gathered management information of the VoIP terminal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.579-580
• /
• 2017

Recently, as safety accidents by reagents increase in laboratories, systems are being developed to safely manage reagents. The existing system monitoring and manages the reagent through the web page, but the internal environment change of the reagent cabinet is considered or the remote monitoring and control function is insufficient. In order to solve this problem, this paper predicts the deterioration of the reagent loaded in the reagent cabinet. And we propose a system that can monitoring and control remotely. It predicts the deterioration of the reagent through the temperature attached to the inside of the reagent cabinet, the value measured by the humidity sensor and the validity period of the reagent, and sends a alert message to the manager. The manager monitoring and controls the reagent cabinet through the application. By predicting the deterioration of the reagents and remotely managing the reagents cabinet it is thought that safety accidents can be reduced.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.3
• /
• pp.208-214
• /
• 2001

본 논문은 시변 입력 지연을 포함한 Takagi-Sugeno (TS) 퍼지 시스템으로 표현 가능한 비선형 시스템을 위한 체계적인 제어기의 설계 기법을 제안한다. 입력 지연은 화학 공정 시스템, 인터넷 기반 가상 실험실, 자율 이동 로봇의 원격 제어등, 실제의 산업 현장에서 매우 빈번히 발생하는 현상이며 제어 시스템의 성능을 감소시키며, 안정성을 저해하는 요소로 알려져 있다. 따라서 본 논문에서 다루고자 하는 문제는 매우 실제적인 문제이며 반드시 해결하여야 할 문제이다. 본 논문은 Lyapunov-Razumikhin 안정 이론에 기반하여 TS 퍼지 모델 기반 제어기의 설계 조건을 제시한다. 최종적인 제어기의 설계 조건은 선형 행렬 부등식의 형태로 주어진다. TS 퍼지모델 기반 제어기가 안정화시킬 수 있는 입력지연의 상한 값을 최대화하기 위하여 이중 최적화 기법을 도입한다. 제안된 제어기 설계 기법의 우수성과 타당성을 입증하기 위하여 모의 실험을 수행하였다. 컴퓨터 시뮬레이션 결과, 본 논문에서 제안한 타당성을 입증할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2603-2605
• /
• 2001

In this paper, we introduce the concept and construction of a web-based bidirectional remote laboratory system. In this configuration, students build and test circuits using internet at home, and the circuit components and experimental equipments at the school are interconnected following student's design. This means that it is possible to choose components, build circuits, connect experiment equipments, control the equipment. and receive measurement results at home in real-time. Labview and Java are used to control this system efficiently and to provide user-friendly environments. Computer-based function generator, DMM, and oscilloscope are used and switch module is used to change interconnections. It was found that a system adopting computer-based instruments, which include PXI/CompactPCI modules and PC plug-in board, provide better performance than that adopting stand-alone instruments connected with GPIB. It is believed that, if this system is installed, the real experiments, not the virtual experiments based on simulation, can be done at home effectively, resulting in revolutional change in engineering education.

• Journal of Engineering Education Research
• /
• v.3 no.1
• /
• pp.27-41
• /
• 2000

Recently there have been many Internet-based studies to provide personal users an efficient educational tool making use of multimedia data. The typical examples are remote education and virtual university where many educational trials on theory-based contents have been performed more frequently than those on experiment-based contents for engineering area. This paper describes about a base system implemented as an example of Internet-based experiment-oriented educations to establish cyber engineering laboratories for mechanics, electronics and chemistry. For the first time as a model of cyber engineering laboratories we herein Introduce in detail a server-and-client-based simulative method in which the result may be displayed on computer monitor of client PC while a simulator program is executed on the server. Secondly we introduce an interactive method in which the user of client PC may not only communicate directly with experiment server after initial connection with management server but also he can confirm the status of experiment being performed by way of video as well as experimental result.

• Korean Journal of Optics and Photonics
• /
• v.21 no.3
• /
• pp.103-110
• /
• 2010

A fiber-phase-noise compensating system was constructed for a 1.4 GHz reference frequency transferred through a 13-km-long fiber spool. The transfer instability was dependent on the temperature variation of the compensating system. With the room temperature variation stabilized within $0.3^{\circ}C$, the transfer instability was $4.6{\times}10^{-14}$ at 0.8 s of average time and $2.5{\times}10^{-16}$ at 1000 s of average time with the fiber phase noise compensated. However, with the room temperature changed by $3.5^{\circ}C$, the transfer instability was $6.8{\times}10^{-14}$ at 1.2 s of average time and $3.0{\times}10^{-15}$ at 1000 s of average time. From this result, the temperature stability condition for the experimental setup could be determined to obtain a transfer instability of $10^{-16}$ at 1000 s of average time.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.7-16
• /
• 2006

A new remote access system for a 1.3 MV high voltage electron microscope has been developed. Almost all essential functions for HVEM operation, huck as stage control, specimen tilting, TV camera selection and image recording, are successfully embedded into this prototype of the remote system. Particularly, this system permits perfect and precise operation of the goniometer and also controls the high resolution digital camera via simple Web browsers. Transmission of control signals and communication with the microscope is accomplished via the global ring network for advanced applications development (GLORIAD). This fact makes it possible to realize virtual laboratory to carry out practical national and international HVEM collaboration by using the present system

• Journal of Korea Water Resources Association
• /
• v.55 no.4
• /
• pp.301-308
• /
• 2022

Algae is an indispensable primary producer in the ecosystem by supplying energy to consumers in the aquatic ecosystem, and is largely divided into green algae, blue-green algae, and diatoms. In the case of blue-green algae, the water temperature rises, which occurs in the summer and overgrows, which is the main cause of the algae bloom. Recently, the change in the occurrence time and frequency of the algae bloom is increasing due to climate change. Existing algae survey methods are performed by collecting water and measuring through sensors, and time, cost and manpower are limited. In order to overcome the limitations of these existing monitoring methods, research has been conducted to perform remote monitoring using spectroscopic devices such as multispectral and hyperspectral using satellite image, UAV, etc. In this study, we tried to confirm the possibility of species classification of remote monitoring through laboratory-scale experiments through algal culture and river water collection. In order to acquire hyperspectral images, a hyperspectral sensor capable of analyzing at 400-1000 nm was used. In order to extract the spectral characteristics of the collected river water for classification of algae species, filtration was performed using a GF/C filter to prepare a sample and images were collected. Radiation correction and base removal of the collected images were performed, and spectral information for each sample was extracted and analyzed through the process of extracting spectral information of algae to identify and compare and analyze the spectral characteristics of algae, and remote sensing based on hyperspectral images in rivers and lakes. We tried to review the applicability of monitoring.

• Archives of design research
• /
• v.17 no.2
• /
• pp.221-230
• /
• 2004

Existing usability testing method, particularly lab-based usability testing, has been widely implemented for development of user interface. However, the method has critical disadvantages such as high cost, time and effort, unnatural testing environment, and lack of user's direct participation in information architecture. With these backgrounds, this paper aims to develop the web-based participatory tool with particular focus on card sorting. Our tool was developed for allowing user to participate in card sorting with his own computer through web. All the data generated while user is participating in the test are automatically sent to the server, which makes it very easy to collect card sorting data. Users can drag cards of interface elements directly and build the interface structure in their own from their computer-screen so that they can represent their mental models on interface structure of testing website. These functions of our tool can help designers to implement card sorting without tedious and time consuming procedures and improve the method of usability testing by reinforcing user's active participation in building an information architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.351-356
• /
• 2011

In this paper, we design a pet location tracking and remote monitoring system that uses ultrasonic, temperature, humidity and illumination sensors to study behavioral patterns and habits. Using ultrasonic waves to calculate distances, a WSN(Wireless Sensor Network) was constructed to transmit data at pet's location, such as temperature, humidity and illumination, to a sink mote. Data received by the system are stored in the database in real time to trace pet's location. Interference among transmitting motes was eliminated by sequentially transmitting RF beacons using sink mote's beacon as the reference signal. Experiments were performed with the laboratory prototype of a pet animal monitoring system implemented for this study. The system analyzes locations of a pet and displays movement patterns, areas of movement, temperature, humidity and illumination using a GUI (graphical user interface).