• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1130-1131
• /
• 2006

본 논문은 고속선에 사용 중인 UM71-C 궤도회로에 대한 전기적인 특성에 관한 시뮬레이션 실행결과를 나타낸다. 고속선 운행선상의 샘플개소를 선정하여 환경에 따른 선로정수를 구하고 전송라인의 특성임피던스와 전파정수를 반영시켜 레일전압과 전류에 대한 시뮬레이션을 수행하였으며, 차상검측시스템에서 측정되어진 검측데이터 파형과 비교하였다. 이러한 모델링 작업은 궤도회로 구성요소의 기능저하를 사전 예측하여 열차의 안전운행을 확보하기 위한 기초자료로 사용되어 질 수 있으며, 또한 차상검측시스템에서 얻어진 검측데이터와의 비교를 통해 유지보수에 활용 가능한 활용지침 및 분석기준을 작성하기 위해 필요하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2534-2540
• /
• 2010

In this paper we propose contents and results on installation and commissioning test for ATP on-board unit, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. In KRRI, we have developed tilting trains for the speed-up of existing lines and for the passenger service improvement where the KTX is not available. And we also make progress the operation trial test at the speed of 10km with the use of ATS units, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. In MLTM, they have decided to accelerate the speed at more than 200km/h for the 7 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should install an ATP on-board unit in tilting trains and verify the operational suitability. Therefore, we have installed and tested the same ATP on-board unit on tilting trains that used in the ATP construction project on Gyeongbu-line and Honam-line.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.386-391
• /
• 2004

일반적으로 철도수요를 추정할 때에는 매표실적에 근거한 직접수요모형(Direct Demand Model)을 많이 사용하여왔다. 고속철도가 2004년 4월 개통됨으로써 실행된 수요가 나옴에 따라 이를 이용하여 KTX와 일반철도를 고려한 직접수요모형의 작성이 가능하게 되었다. 따라서 본 논문에서는 고속철도 운행 전${\cdot}$후의 실제수요를 이용하여 고속철도 개통 전${\cdot}$후의 직접수요모형을 추정하여보았다. 모형에 사용되는 변수로는 철도서비스, 사회경제지표 등을 사용하였다. 그 중 철도서비스, 즉 운행시간, 운행빈도, 운임 등을 집중적으로 사용하여 모형을 작성하였다. 이렇게 작성된 모형은 KTX와 일반철도, 일반철도 등급간에서 철도서비스 변수의 기여를 명시적으로 제시해준다. 개발된 모형을 이용하여 KTX 및 일반철도의 운행방향에 대하여 검토하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3610-3616
• /
• 2011

Electrical Railroads provide electric power, which can operate vehicles, via feeder wires. And the supplied current returns to the transformer substation through lines and ground net. The used load current depending on the operation of rail vehicles in the electric railway sections returns to the substation through a track which is a return circuit. The load current contains harmonics because of the power conversion equipment used in rolling stocks and such harmonic currents should not affect train control system. In this paper we present the test result in order to verify that the harmonics produced by the operation of rail vehicles in the newly built electric railway sections can affect interlocking systems. The test in question was performed in a linking section that trackside equipment under railway operating conditions and interlocking are linked in order to identify whether or not the interlocking fitted in a signal machine room can be affected by harmonics according to railway operation.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.374-390
• /
• 2015

This research shows the relationship between the number of trains and the probability of trains with arrival delay and suggests way to estimate the benefits of improved punctuality in a bottleneck section of the Gyeongbu Line. The arrival delays of high-speed and conventional trains were estimated using the train operation data of KORAIL. Linear regression models for the probability of trains with arrival delay by train type are presented in this paper. The probabilities of trains with arrival delay were more affected by the number of conventional trains than by the number of high-speed rail trains. For the empirical analysis, a project for increasing the capacity in the Seoul~Geumcheongu office section was tested. The benefits of the improved punctuality were estimated to be 4.2~4.5 billion Korean won every year. This research has some limitations but it can help evaluate more precisely the feasibility of the project of increasing the capacity in bottleneck sections.

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.663-669
• /
• 2007

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.631-637
• /
• 2012

New Opening of Suseo-Pyeongteak High Speed Railway (HSR) will be a new leap in the Korean railway history. However if this section of HSR line around Seoul Metropolitan Area opens, the confluence of new HSR and existing HSR line in Pyeongteak-Osong section will cause a bottle neck problem. In other words, the opening of Suseo-Pyeongteak HSR line will make the capacity of track reach the limit and the section of railroad between Pyeongteak and Osong will be saturated. This will also make such troubles as restricting the number of train which stops at Cheonan-Asan station. In this study, based on the train assignment theory of TVM430 signal system, the methods of calculating headway and number of train are reviewed and the plan for application of optimal operation pattern during peak hour between Pyeongteak-Osong section is also suggested. To remove the bottle neck problem in this HSR section, 3 alternatives are suggested and the expected effects and problems of each alternative are also analyzed. The results show that the troubles caused by excess of track capacity can be removed without any additional cost if the minimum headway in operating system for HSR is adopted in this section. In the future, if these alternatives are considered to the long-term plan for operating train and signal systems, this will improve the efficiency of train operation, which can remove the bottle neck in the HSR line.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.95-106
• /
• 2012

The railway service in the Seoul metropolitan area is facing variety of l changes such as extension of service coverage, new construction, and introduction of express service which in turn causes changes on demands. The demand affects train operation characteristics (frequency of service, train formation) as well as on the congestion rate which is one of the major evaluation index in metropolitan area user service. For the efficient operation of the train, the relationship among the minimization of fleet number, operating cost, and service level has been analyzed. Using the Powersim, which is a system dynamics (System Dynamics) simulation program for realizing optimized simulation for train-formation, this paper identified that some stations of Gyeong-bu line exceeded limit congestion rate(150%) of a fleet already that means it is best to maintain current condition of the line; however, the Gyeong-in line and the Gwa-chon line showed no excess of the limit congestion rate so that it is possible to reduce 2-4 fleets of train for efficient operation. In addition, in case of Jang-hang line between Cheon-an and Sin-chang, a train consisting of 10 fleets provides services which is same formation of train for Gyeong-bu line. This study proved that the congestion rate will not rise greatly with only 4 fleets of a train for the service in Jang-hang line, and it is considered that a study for shuttle service between Cheon-an and Sin-chang is necessary.

• 전기의세계
• /
• v.38 no.6
• /
• pp.58-64
• /
• 1989

본고에서는 고속철도중 전기철도에 촛점을 맞춰 고속전철의 일반적 제어방식에 대해 논하고 또한 세계의 고속전철중 대표적 예인 프랑스의 TGV, 일본의 신간선, 서독의 ICE의 주회로에 대해 소개하기로 하고 특히 실제로 영업운행중인 TGV와 신간선의 가감속특성과 집전방식에 대하여 비교하고자 한다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1656-1664
• /
• 2007

This paper introduces a study of improvement for a defect diagnosis of the UM71C track circuit using on HSL. The track circuit on HSL has long operation section. Therefore, when the worker maintain, many times and efforts are spent. So, periodically, we have operated a inspection car. However, we don't know exactly the state changed of the inspection data when track circuit has defect. Actually, We fixed a sample area within operation section on HSL and performed the simulations for short circuit current that is reflected characteristic impedance and propagation factor. We compared the measuring data with the result of the simulation. Using verified simulation program, we estimated inspection data as the malfunction number and the change of capacity of compensation capacitor. These study need to secure of the safety as the train operation. Also, It needs to make a criteria of analysis for the maintenance through comparison simulation data and inspection data.