• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.870-873
• /
• 2018

This paper presents the high frequency resonant inverter using ZVS(Zero Voltage Switching) known as the soft switching technology, which can reduce the turn-on and turn-off switching losses. Also, the analysis of the proposed resonant inverter is described by adopting normalized parameters, and its operating characteristics are evaluated according to the switching frequency and parameters. An example of 1.3[kW] IH-Jar design technique is presented based on the characteristic values obtained from the theoretical analysis. To prove the validity of the theoretical analysis, the experimental results using IGBT as the switching devices are additionally presented. In the future, it can be practically used in various power systems such as induction heating cooking, IH-Jar etc.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.533-540
• /
• 2013

Prime movers in engine rooms inherently are much affected by the adjustment of their governors for the steady state and transient properties, consequently requiring that marine engineers shall be well familiar with the way to manage governor dials for normal operation. The hydro-mechanical governors basically have different control characteristics and adjustment parameters of stability from digital governors. The former include compensation mechanism using dash pot while the control algorithm of the latter is usually based on the PID action. This study is for configuring a simulation module to let trainees practice how to adjust dials for stability on hydraulic governors in the view that the practice by real governors and engines is time consuming and high cost for operation. The governor module includes the adjusting points such as speed set, speed droop, needle valve and compensation pointer with engine module of $2^{nd}$ order coupled. The results of simulation showed satisfactory responses as a training tool for the adjustment of control parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2625-2632
• /
• 2009

Recently, a speed control method of induction motor by vector control theory is applied to highly efficient industrial field. The speed sensors attached to motor are used for detection of rotating speed. In the case using speed sensor, the installation of cable for minimization of electric noise, weaken maintenance, increase of price are demerit. Therefore the study of speed sensorless vector control theory performed activity. The design of sensorless vector controller for induction motor using tabu search is studied. The proposed sensorless vector control for Induction Motor is composed of two parts. The first part is for optimizing the speed estimation with initial PI parameters. The second part is for optimizing the speed control with initial PI parameters using tabu search. Proposed tabu search is improved by neighbor solution creation using Triangular random distribution. In order to show the usefulness of the proposed method, we apply the proposed controller to the sensorless speed control of an actual AC induction Motor System. The performance of this approach is verified through simulation and the experiment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.349-358
• /
• 2019

This paper aimed at collecting sensor signals to extract characteristic parameter of the rotor. A vibration test rig has been developed to perform model tests. Signal characteristics were analyzed when driving normally. Envelope FFT Analysis is used to extract vibration components caused by periodic impacts from other vibration factors. Signal analysis was performed when load changes were given to speed sensors and vibration test rigs that show low frequency characteristics of the rotor and signal analysis according to rotational speed. The acceleration signal measured in the bearing housing has a small amplitude and produces only the rotational frequency component and harmonic component of the motor. As the number of rotations increases, the amplitude of acceleration can be seen. As the rotational speed increases, it can be seen that there is a difference in the shape of the original data and compared with the acceleration FFT graph, it can be seen that the noise is strong at low frequencies and the corresponding rotational frequency components are clearly represented. It can be seen that changing the load does not increase the main rotational frequency component.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3133-3141
• /
• 2011

The next generation domestic high speed railway system is a power distributed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor drive system due to their advantages in efficiency, noise reduction and maintenance. The next-generation high speed train is composed of 2 converter units, 4 inverter units, and 4 Traction Motor units. Each motor is connected to the inverter directly. In this paper, the effect of IPMSM parameter variations to the system operation characteristics of the multi inverter drive high speed train system are investigated. The parallel connected inverter input-output characteristics are analyzed to the parameter mismatches of IPMSM using the 1C1M control simulator based on Matlab/Simulink.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.35-36
• /
• 2013

본 논문은 EV(Electric Vehicle)에 사용되는 배터리의 충/방전 전류에 따른 SOC(State of Charge) 및 전압특성을 Matlab Simulink로 구현하였으며, 검증을 위해 양방향 DC-DC 컨버터를 설계하여 실험을 하였다. 배터리 모델에 사용된 파라미터는 Randles등가회로를 기반으로 펄스방전을 통해 추출하였고, 단자전압 계산부에 3D Look-up 테이블을 이용해 적용하였다. SOC계산부는 전류에 따른 용량변화를 보상하기 위해 Peukert Effect를 적용하였으며, FTP-75 전류패턴으로 온도($0^{\circ}C$, $25^{\circ}C$, $40^{\circ}C$)에 따라 실험한 결과 시뮬레이션의 오차율은 5%로 높은 정확도를 갖는 것을 확인을 통해 검증 하였다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.13-15
• /
• 2008

본 논문은 대형(MW 급) LNG 전기추진선박 시스템의 동적 정적 특성에 대해 다룬다. 특히, 선박 항해시와 LNG Unloading시에 대해 전력조류해석(정특성 해석)으로 시스템 모델링의 타당성을 검증하였다. 아울러, LNG Unloading에 대한 Cargo Pump 기동시 시스템의 전압변동률 및 발전기의 주파수(속도)변화를 관찰하였으며, PID제어기로 구성된 발전기 Governor의 파라미터를 설계하기 위해 실제 항해시 발생할 수 있는 몇 가지 상황(발전기 및 추진전동기 Trip)의 과도안정도해석을 수행하였다. 따라서 전동기 기동해석 및 과도안정도해석(동특성 해석)으로 발전기 및 추진전동기의 전압안정성을 관찰하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.880-881
• /
• 2011

본 논문은 전기자동차 구동용 유도전동기의 고속영역에서 의 특성에 관해 연구한 논문으로 전동기의 회전자 슬롯의 형상 변화를 통하여 전기장하와 자기장하에 변화를 주었을 때 변화된 파라미터가 고속영역에서 어떠한 영향을 주는지 2차원 유한요소 해석을 통해 특성을 분석하고자 한다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.57-63
• /
• 1993

In this paper, we study the effects that the variations of machine parameters and frequency of which affect the instability occured in induction motors when operated at low speed or light load, by obtaining the locus of dominant root for the characteristic equation.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.138-141
• /
• 1999

전류의 손실 없이 MRI 마그네트의 연구전류 운전을 위한 영구전류스위치(Persistent Current Switch;PCS)를 설계 및 제작하여 그 특성을 측정하였다. 한국전기연구소의 Whole body MRI 마그네트로의 적용을 위해 설계되었으며, 또한 PCS 보빈을 기존의 FRP에 비해 열전도 특성과 기계적 강도가 우수한 알루미늄으로 제작하였다. Main 코일 1개와 Shim 코일 9개의 PCS에 대한 필요한 파라미터를 계산하여 제작하였다. PCS의 기본요구조건인 step 형태의 스위칭 특성과 각 PCS가 실온저항의 50%∼55%의 상전도 저항 특성을 보임을 확인하였다.