• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.56-61
• /
• 2011

Performance test of a full-scale turbopump assembly for a 75 ton class liquid rocket engine was carried out at full speed. Model fluid was used as a working medium: liquid nitrogen for the oxidizer pump, water for the fuel pump, and hot air for the turbine. The turbopump was operated stably, satisfying the performance requirements. Head coefficient and flow coefficient of the pumps remained constant at the speed-increasing period. In terms of performance characteristics of pumps and turbine, the results from the turbopump assembly test showed a good agreement with those from the turbopump component tests.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.137-141
• /
• 1995

회전기계에서 발생하는 진동 원인 중 약 60% 이상이 불평형(unbalance)에 의한 진동이다. 불평형은 기계의 과도한 진동을 유발시킬 뿐 아니라 베어링의 수명 단축 및 소음을 발생시킨다. 따라서, 기게의 수명을 연장시키고, 기계의 성능을 향상시키며 부드럽고 진동이 없는 운전을 위하여 평형잡이(balancing)는 절대적으로 중요하다. 불평형은 축 중심선에 대하여 회전체의 질량 분포가 비대칭이기 때문에 발생하는데 그 원인으로는 부품 자체가 비대칭에서 오는 설계 또는 제도 오차, 주물의 기포 및 용접의 불균일 등에 의한 재질상의 결함, 그리고 부품조립시 형상누적공차 등에 의한 가공.조립오차 등이 있다. ISO의 정의에 따르면 평형잡이는 회전체의 질량 분포를 조사하고 필요하다면 저널의 진동과 베어링의 작용력들이 운전속도에 대응하는 주파수에서 특정한 한계내에 있도록 보증하게 하기 위한 조정을 하는 과정이다. 불평형 상태에 대한 조사도 평형잡이로 표현된다. 그러나 수정이 필요하다고 간주된다면 수행된다. 모든 회전체는 초기 불평형(initial unbalance)이라 불리는 임의의 불평형을 가지고 출발한다. 완벽하게 평형이 잡힌 회전체를 달성하는 것이 평형잡이 작업의 목적은 아니다. 임의의 잔류 불평형(residual unbalance)은 항상 허용된다. 경제적인 이유에서 회전체는 일반적으로 요구되는 적절한 허용치보다 더 이상 평형잡이를 하지 않는다. 현장에서 현장 평형잡이를 수행하게 될 경우, 가끔 계산된 수정질량이 매우 클 경우가 있다. 이때 기게의 조건상 큰 수정질량을 부착하기가 곤란한 경우가 자주 발생한다. 작은 수정질량으로 평형잡이를 할 수 있다면 기계의 안정성 면에서 매우 유리하다. 따라서 본 연구에서는 영향계수법(Influence Coefficient Method : ICM)의 기본 개념과 유전 알고리즘(Genetic Algorithm : GA)을 이용하여 회전기계의 안정성을 보장할 수 있는 허용진동 내에서의 최적 수정질량 계산법을 제시한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.27-32
• /
• 2010

Performance test of a full-scale turbopump assembly for a 75 ton class liquid rocket engine was carried out at full speed. Model fluid was used as a working medium: liquid nitrogen for the oxidizer pump, water for the fuel pump, and hot air for the turbine. The turbopump was operated stably, satisfying the performance requirements. Head coefficient and flow coefficient of the pumps remained constant at the speed-increasing period. In terms of performance characteristics of pumps and turbine, the results from the turbopump assembly test showed a good agreement with those from the turbopump component tests.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.62-73
• /
• 2014

This research was focused to apply response surface methodology for optimization of bio-methane production by biogas upgrading process. Methane concentration(Y1) and methane efficiency(Y2) on biogas upgrading process were mathematically described as being modeled by the use of the Box-Behnken design on response surface methodology. The results of ANOVA(analysis of variance) about models, the probability value of the methane concentration and methane recovery response surface model are 0.0001 and 0.0001, respectively and coefficient of determination($R^2$) are 0.9788 and 0.9710, respectively. The response surface model is proved of high reliability and suitability. The operation pressure had the greatest influence to methane concentration than other operation parameters and the PSA rotary valve velocity had the greatest influence to methane recovery than other operation parameters. Optimal condition of biogas upgrading process for production of $100Nm^3/hr$ bio-methane were operation pressure 8.0bar and outlet flow rate 31.55RPM, respectively. At that operation condition the methane concentration of bio-methane was 97.13% and methane recovery in biogas upgrading process was 75.89%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.870-875
• /
• 2015

Diesel engines are widely used due to superior power and fuel consumption, however there are many challenges in exhaust gas management. Exhaust gas recirculation (EGR) is the most effective technique for reducing mono-nitrogen oxide (NOx) emissions in a diesel engine, in comparison with other catalytic technologies. In addition, the technology has a number of advantages in terms of economic efficiency and implementation. In this study, the effects on the power and exhaust characteristics of diesel engines equipped with EGR systems were investigated. It was found that as the EGR rate increased, horsepower expressed as IHP and BHP decreased. The net effect of the application of EGR was measured at various engine speeds. EGR technology caused decreases in BHP of around 9% during low engine speed and 3.5% during high engine speed. Additionally, NOx emissions reduced as the EGR rate increased, and increased as engine speed increased. However, smoke emissions increased as the EGR rate increased, and decreased as engine speed increased. The optimum operating conditions and ERG rate to simultaneously achieve minimum NOx and smoke emissions were investigate. It was found that as the EGR rate increased, optimal operating speed for minimal NOx and smoke also increased. Keywords: Diesel engine, Exhaust gas recirculation, Power perfomance, Emission characteristics, NOx, Smoke

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.558-560
• /
• 1997

실제 디젤 자동차를 운행할 때 헌팅이나 서지현상이 발생하여 운전상 좋지 못한 현상이 발생한다. 자동차의 디젤기관은 회전수의 안정화를 도모하기 위해서 연료 분사펌퍼의 분사량 조정봉(Rack)을 가바나의 조속기에 의해 위치 제어할 필요가 있다. 본 연구에서는 헌팅을 억제할 목적으로 종래에 사용한 기계식 가바나 대신에 최근에 등장하고 비교적 자유로운 제어규칙을 갖도록 할 수 있는 전자식 가바나를 사용할 때 헌칭이 발생하는 조건이 시뮬레이션을 통하여 조사검토 할 수 있음을 나타내었다. 이 결과에 기초하여 헌칭의 억제는 운전상태에 따라 행할 수 있는 헌팅 억제 규칙을 얻었다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.115-120
• /
• 2021

In this paper, an operating algorithm for single-phase permanent magnet synchronous motor based on PR current controller is proposed. In general, an asymmetric gap may occur depending on the shape of the rotor of single-phase PMSM, and this causes noise and vibration during high-speed operation. Therefore, in this paper, an operating algorithm for a single-phase PMSM usihng a proportional resonant current conrtoller with excellent control stability was proposed. Proportional resonant current controller has on steady state error is relatevly robust against distortion. Also, steady state error of AC input can be eleminated without complicated calculation process. The validity and availability of the proposed algorithm are verified through the experiment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.194-197
• /
• 2001

본 연구에서는 유류 오염토양 복원을 위한 효율적인 이동형 연속식 토양세척 장비를 개발하여 현장 적용 가능성을 검토하였다. 진세척조는 내부에 스크류를 설치함으로써 주입되는 오염토양과 세척용액의 기계적 교반에 의한 원활한 접촉과 토양간의 마찰 등으로 인하여 토양으로부터 오염물질의 탈착이 효과적으로 이루어지도록 하였다. 전세척조 외부에 위치한 주세척조는 전세척조에서 탈착된 오염물질과 미세입자를 원 토양으로부터 효율적으로 분리하기 위한 헹굼작용과 배출부에서 미세입자를 포함하는 세척 유출수가 효율적으로 분리 배출이 될 수 있도록 설계.제작하였다. 현장 적용 실험결과, 설계 목표치인 토양 주입 속도 15m$^3$/day, 계면활성제 POE$_{5}$POE$_{14}$의 비 1:1 (농도 0.1%), 세척수/토양 비 (부피/중량비) 1, 전세척조 회전속도 18rpm. 주세척조 회전속도 5rpm의 운전조건에서 90% 이상의 높은 세척효율을 나타내었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.21-26
• /
• 2002

The behavior of the biological water treatment process on start-up operation was evaluated in the integrated recirculating aquaculture system consisting of a double drain type rearing tank ($2.5 m^3$), a sedimentation tank, a floating bead filter, a foam separator and a rotating biological contactor. A system was stocked with nile tilapia (Oreochromis niloticus) at an initial rearing density of $2\%$ for 2 weeks for acclimated rotating biological contactor. The total ammonia nitrogen (TAN) level increased to $13.6 g/m^3$ on day 4 after adding feed and was decreased to $0.3 g/m^3$ on day 7. The total suspended solid was completely removed during overall experimental period.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.87-97
• /
• 2018

Bus, a major transportation mode, doesn't have a systematical evaluation system for dangerous driving behavior yet. This paper analyzes the characteristics and pattern of bus driving behavior using Digital Tacho Graph(DTG) data on express bus. 8 types of dangerous driving behavior were considered according to timeslot, the day of week and weather condition. As results, rapid acceleration, rapid left right turn and rapid deceleratio accounted for more than 97% and relatively high percentages were shown in dawn, on Friday and on the clear day, respectively. From the statistical analysis, correlation between the dangerous driving types and difference according the timeslot were found, and 3 groups considering the level of the dangerous driving were suggested. This study contributes to setting an efficient and reliable eduction system for using driving simulators.