• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.125-130
• /
• 1992

A digital 6-dof motion measuring system is developed using 7 accelerometers following Miles'[1] method. A snoic wave height gauge is also developed to measure the relative wave height at the foremost end of the ship. By combining the time series of both 6-dof motions and relative wave height, we can estimate the time series of real sea wave. Results of model tests shows the validity of the developed system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.183-185
• /
• 2012

선박의 다양화와 부두의 제한성으로 인하여 수심이 얕은 수역이나 협소한 부두에 접안 시 소형계류시설 및 부유체를 이용하여 해상 공간을 활용하고 있다. 이를 통하여 다양한 장소에서 접안이 가능하며 나아가 상당한 비용절감 효과를 가질 수 있다. 그러나 소형계류 및 부유체를 활용한 선박의 접안 시 파랑에 의해 부유체와 선박간 충격이 발생할 수 있고 이러한 충격이 대형사고로 발생할 수 있는 위험이 상존함에 따라 계류재 및 부유체의 파랑에 의한 움직임 예측과 분석이 필요하다. 본 연구에서는 계류재 및 부유체 운동해석을 위한 3차원 운동 정보와 가속도를 측정함으 써 거동 특성에 대한 기초 자료를 제공하는 계측시스템을 개발하였고, 이 시스템의 구성 및 원리 등에 대하여 소개하고자 한다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.2
• /
• pp.32-40
• /
• 1989

Dynamic ship positioning(DP) system is used to keep the position and heading of a ship, or a floating platform, above a pre-selected site on the seabed by using thrusters. This paper presents a control system based on filtering technique and optimal control theory. The planar motions of a vessel are assumed to consist of low frequency(LF) component and high frequency(HF) one. The former is mainly due to thrusters, current, wind and second order wave forces, while the latter is mainly due to first order oscillatory component of the wave force. Furthermore position measurement signals include the noise. By means of self-tuning filter and Kalman filter techniques, LF motion estimates and HF ones are seperately achieved from the position measurements of the vessel. The estimated LF motions are used as input to the feedback loops. The total thruster power is minimized using the Linear Quadratic Gaussian control theory. The performance of the vessel with the DP system is investigated by computer simulation.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2008

A ship in a sea cruises with rolling, pitching, heaving etc because of environmental causes such as wind and wave. Those motions make crews or passengers feel inconvenience and they feel acceleration changes. Therefore, if lateral and vertical accelerations can be measured at a specific position in a ship, it can be known how discomfortable crews or passengers are. The motion monitoring system developed in this paper consists of measuring and communicating part including five accelerometers and gyro and a main computer which acquires measuring data and calculates motion indices. MSI(Motion Sickness Incidence) and MII(Motion Induced Interrupt) are calculated in real time using measured acceleration and angular rate. The validity of the developed system was confirmed through the real ship test of Hannara which is the school ship of Korea Maritime University.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.847-852
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three-dimensional accelerator, two-dimensional tilt sensor, azimuth sensor and two displacement sensors. Using this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.69-74
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method sum as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kind of sensors sum as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using this measuring system(MMS), it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing sum as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.98-101
• /
• 2011

건강에 대한 관심이 높아지면서 헬스케어와 IT와의 결합으로 많은 IT관련 헬스 케어 시스템이 개발되고 있으며, 이러한 시스템의 수요 또한 증가하는 추세에 있다. 본 논문에서는 이와 같은 건강에 대한 관심을 반영하여 자신에 맞는 운동을 선택 및 수행하고 그에 따른 피드백을 받을 수 있는 시스템을 소개한다. 본 시스템은 헬스케어의 건강 관리 시스템을 피트니스 관점에 비중을 두어 이용자의 초기 운동 정보를 기반으로 몸에 맞는 운동을 처방하여 운동을 수행 시키고 그 결과를 저장한다. 운동 정보는 생체 신호 계측을 위한 물리량 센서 및 모듈에 의하여 측정된다. 저장된 운동 결과는 다음 운동 처방에 반영되어 피드백 방식으로 이용자의 운동에 적용된다. 운동 처방은 주단위로 수행되면서 지속적인 관리를 받을 수 있도록 설계되었다. 본 시스템은 운동 중 발생하는 무구속, 무자각적 생체 신호 계측을 위한 물리량 센서 및 모듈을 이용하여 다차원 생체 정보를 수집하고 생체 신호 표준화 및 생체 역학적 해석을 통해 데이터베이스를 구축하였다. 이렇게 구축한 데이터들을 통하여 지능형 바이오피드백 기반의 사용자 맞춤형 운동 관리 시스템을 개발하여 사용자의 건강 및 운동능력을 향상시키는데 그 목적이 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.165-166
• /
• 2013

When Coming alongside the shallow water or narrow pier, they apply sea area with small mooring facilities and Floating matter because of the diversity of ships and limitation and effective in cutting expenses. However, when ships, applying Small mooring facilities and Floating matter, come alongside, there can be some impulse by waves between the Floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this Study, it introduces the composition and principles of the developed system provides the base of the movement traits through measuring 3-D exercise data and acceleration of the Mooring and Floating matters.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.252-254
• /
• 2013

When Coming alongside the shallow water or narrow pier, they apply sea area with small mooring facilities and Floating matter because of the diversity of ships and limitation and effective in cutting expenses. However, when ships, applying Small mooring facilities and Floating matter, come alongside, there can be some impulse by waves between the Floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this Study, it introduces the composition and principles of the developed system provides the base of the movement traits through measuring 3-D exercise data and acceleration of the Mooring and Floating matters.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.11-13
• /
• 2007

본 연구에서 개발한 운항환경 모니터링 시스템은 5개의 가속도계와 자이로, 데이터 취득장치를 포함한 계측 및 통신부, 중앙에서 데이터를 관리하고, 운항지수를 계산하는 전산기로 구성된다. 계측된 가속도와 각속도를 이용하여 운항환경을 나타내는 정량적 지수인 뱃멀미 지수(Motion Sickness Incidence, MSI), 분당 작업방해회수(Motion Induced Interrupt, MII)를 실시간으로 계산한다. 개발된 시스템은 한국해양대학교 실습선인 한나라호의 부산 목포 연안항해시 실선시험을 통하여 유효성을 확인하였다.