• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.441-448
• /
• 2015

This study aims to suggest a reasonable signal operation method for right-turn traffic management. It was found that the right-turn vehicle supplementary signal is currently operated without clear regulations or criteria. It was also analyzed that right-turn supplementary signals are used without consistency, there is a risk of traffic accidents due to the discordance between supplementary signals and traffic signals of forward vehicles, there is a lack of basis for prohibition of a right turn when right-turn vehicle's supplementary signal is red and the flashing red signal is used in a different sense from the law. In order to see the effect of the installed right-turn vehicle supplementary signals on traffic signal violation, a field investigation was conducted. As the result, there was a high proportion of signal violation on the approach lane with right-turn supplementary signals and this means that right-turn supplementary signals hardly influenced the reduction in proportion of signal violation during a right turn. Additionally, a survey was carried out to see if there were differences in driver's interpretation of traffic signals depending on the installation of right-turn supplementary signals. As the result of the survey, there were no differences in interpretation of traffic signals depending on the installation of right-turn supplementary signals or the types of right-turn supplementary signals. A right turn when the signal was red did not lead to serious traffic accidents, so it is thought that there should be a careful consideration of a total ban on a right turn when the signal is red, in order to prevent driver's confusion due to the change of the signal system. Unless there is a disturbance to cars and pedestrians after a temporary stop when the signal is red, there is a need to specify that vehicles must stop temporarily in the Road Traffic Act to facilitate a right turn. What this study finally suggested is to use tri-colored arrow signals for right-turn car supplementary signals to convey a signal to a driver clearly.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.79-89
• /
• 2017

The purpose of this study is to analyze the current right-turn operation at signalized intersections and suggest appropriate right-turn operation strategy. From field investigation, right-turn signals have not only operated various type and shape, lacking of consistency, but also there was no clear regulations or standards. It could increase drivers' confusion and cause vehicle-to-pedestrian accidents. In order to improve pedestrian safety, there is urgent need to study the regulations and standards regarding to right-turn traffic control. This study suggests appropriate right-turn signal operation strategy. In case of permissive right-turn operation, it should be stated on regulations that red light means right-turn vehicles must stop temporarily at the stop line and then turn right. Necessary conditions for installing right-turn signal for protected operation are that there should have one or more exclusive right-turn lanes and right-turn signal face should contain the lenses with three-color arrow indication. In addition, we assort right-turn operation types as permissive, protected and protected/permissive right-turn and suggest specific signal operation strategy by the types.

• 한국도로학회:학술대회논문집
• /
• 2006.10a
• /
• pp.293-300
• /
• 2006

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.57-70
• /
• 2009

According to the change of the traffic conditions, the requirement of controlling the separated left(or right) turn, the median bus lane and bicycle signal is increasing. However, the traffic signal controller standard based on the four-set lights restricts to control the three-set lights which control the separated direction and kind of traffics. This study suggests the method to control the three-set lights signal by improving the hardware and software for the traffic signal controller which is operated currently in the traffic scene. The 6 output ports of Load Signal Unit(LSU) which is consisted of Pedestrian Red, Pedestrian Green, Red, Yellow, Arrow and Green signal reconstitute 2 rows of the Red, Yellow, Green for three-set lights while the Signal Map data's code values which control the signal step of an individual Ring and LSU are established to adjust the LSU's output ports(R1 Y1 G1 R2 Y2 G2) of the three-set lights. The effect of using the separated through/left turn and the median lane bus signal of three-set lights is analyzed from a Mangwoo intersection in Seoul. The results of analysis show that the delay time of the east-west direction where the median bus lane is operated is especially improved with over 70 sec/veh.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2015

It has been subject to question whether a conventional traffic signal controller can support efficient operation at grade intersections in which vehicles and tram lines cross concurrently. This study proposes a list of functional requirements for a traffic signal controller to support effective operation of trams at such an intersection. The considered details includes the combinations of geometric conditions at which vehicle, bus, and tram lines are aligned, the types of exclusive tram signals, and the combinations of various signal phases, including exclusive tram phases, which are currently undefined in the nation. The results suggest that the controller should be capable of dealing with the NEMA standard overlap relays and a quadruple-ring phase representation scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.85-93
• /
• 2015

Previous studies have estimated crash prediction models with the fixed effect model which assumes the fixed value of coefficients without considering characteristics of each intersections. However the fixed effect model would estimate under estimation of the standard error resulted in over estimation of t-value. In order to overcome these shortcomings, the random effect model can be used with considering heterogeneity of AADT, geometric information and unobserved factors. In this study, data collections from 89 intersections in Daejeon and estimates of crash prediction models were conducted using the random and fixed effect negative binomial regression model for comparison and analysis of two models. As a result of model estimates, AADT, speed limits, number of lanes, exclusive right turn pockets and front traffic signal were found to be significant. For comparing statistical significance of two models, the random effect model could be better statistical significance with -1537.802 of log-likelihood at convergence comparing with -1691.327 for the fixed effect model. Also likelihood ration value was computed as 0.279 for the random effect model and 0.207 for the fixed effect model. This mean that the random effect model can be improved for statistical significance of models comparing with the fixed effect model.