• Korean Journal of Environmental Agriculture
• /
• v.8 no.2
• /
• pp.142-147
• /
• 1989

In this report, we set up a simple device which enabled us to obtain data useful to estimate the relative capacity of thermal energy retention of greenhouse built with various plastic coverings. A box($20cm{\times}20cm{\times}30cm$) framed with flexiglass at the edges and covered with thin plastic films was made, in which were placed a thermostat-controlled nichrom wire heater and a thermal probe made of thermister to monitor temperature changes. A wheaston-bridge type transducer and a chart recorder were used to record the changes of temperature inside the box The data obtained by using the device showed that the relative rate of heat toss through plastic films with identical thickness decreased in the order of PE film>EVA film>PVC film and that IR additives such as fine silica gel improved the insulating power of plastic films. This observations are in well accord with general information, demostrating the feasibility of the device in usefulness for the purpose of screening of various commercial plastic coverings.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.98-98
• /
• 2012

최근 국내외에서 첨단 기능성 섬유에 대한 소비자들의 관심이 높아지면서 다양한 분야에서 기능성 소재들이 개발되고 있다. 특히 기능성 스포츠웨어 시장에서는 계절의 경계를 넘어 야외 활동 중에 사용할 수 있는 제품에 대한 요구가 증가되고 있는데, 날씨가 매우 덥고 햇살이 뜨거운 것에서부터, 얼음처럼 차갑고 추운 것까지 가지각색 인 경우가 있을 수 있다. 이러한 변화무쌍한 날씨에 쾌적한 활동을 하기 위해서는 외부 온도변화에 대응하여 몸을 보호하고 자연환경에 맞설 수 있는 의복의 필요성이 부각되고 있다. 본 연구에서 개발하고자 하는 지능형 체온조절 섬유는 정적상태에서는 보온성과 적외선을 방출을 통한 자가 발열기능을 부여하고, 동적상태에서는 태양열 증폭기능과 운동량에 따른 흡습발열의 기능을 통하여 자연환경과 의복환경의 변화에 대응할 수 있는 스포츠웨어 제품이다. 따라서 보온성이 우수한 PP, acrylate 원사 등을 이용하여 복합 방적사 설계 및 생산을 최적화였다. 또한 흡습발열 성능이 향상된 섬유구조체를 설계하여 개발 원사 구성에 따라 보온 발열 기능성 부여 방법을 달리하여 최적의 성능을 이끌어내는 제품을 개발하고자 하였다.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.419-429
• /
• 2024

Purpose: To enhance the non-combustibility of fire protection piping insulation and improve the heat resistance of smoke extraction duct insulation, I plan to verify the suitability of AES insulation materials for these applications through performance testing. Method: The non-combustibility, heat resistance, and thermal insulation performance of AES insulation materials will be verified through various tests. Result: According to the 'Standards for Flame Retardancy and Fire Spread Prevention of Building Finishing Materials,' the results of non-combustibility and gas toxicity tests confirmed the non-combustible properties. The standard fire resistance tests verified the fire resistance performance. Additionally, the thermal insulation performance was confirmed through building insulation tests. Conclusion: As the performance tests on AES inorganic insulation materials have proven their noncombustibility, fire resistance, and thermal insulation performance, these materials are considered a viable alternative for improving fire spread prevention in buildings.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.1-8
• /
• 2019

Reaction-to-fire performance of pipe insulation materials should be approved in accordance with KS standards prior to installing water-based suppression systems because several fire accidents are initiated from insulation materials around ceilings or concealed space. A small room test to evaluate the reaction-to-fire performance of the polyethylene foam and elastomeric pipe insulation materials was conducted according to ISO 20632. Different fire growth rate and heat release rate are observed depending on the materials and construction methods. In order to improve a fire safety, the reaction-to-fire performance of pipe insulation material needs to be subdivided with regard to the heat release rate and smoke generation. Furthermore, the characteristics of the applying space are also required to be considered. Subsidiary materials for installation process such as tape and adhesive are found to provide an adverse effect to maintain a fire safety.

• Product Safety
• /
• s.26
• /
• pp.9-12
• /
• 1994

전기냉$\cdot$온수기는 종래 사무실등에서만 주로 사용되었으나, 최근 생수공급의 증가와 함께 가정용으로 수요가 급증하고있는 추세에 있어 품질수준을 알아보기 위하여 국내 7개업체의 제품을 대상으로 냉각속도, 보온성능등 22개 항목에 대하여 비교평가를 실시한 결과 대체적으로 양호한 수준인 것으로 나타났으며, 항목별로 분석해 본 결과 유원산업(주)(BIO-201)제품이 타사에 비하여 우수한 항목이 많아 제일 좋은 것으로 나타났고 (주)동

• Journal of Korea Foundry Society
• /
• v.9 no.6
• /
• pp.446-453
• /
• 1989

무철심 유도로를 이용한 주철 및 주강의 용해보온에 요구되는 야금학적인 조건에 관하여 광범한 연구 조사가 있었다. 가장 중요한 법칙을 요약 설명하고자 한다. 이들 법칙은 주물공장에서 활용할 수 있으며 주물의 모서리 근처, 가혹한 조건하에서 발생 할 수 있는 여러 가지 결함을 방지하는데 도움이 될 것이다. 이러한 점에서 작업공정 절차를 관찰하는 것이 중요하며 현장에서 사용하도록 판정도표를 작성하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.109-110
• /
• 2008

본 연구에서는 신축성이 우수한 친수형 무공 PET필름을 사용해서, 소취성, 보온성 및 투습방수성이 우수한 신발용 소재를 개발하였다. 이상의 목적을 달성하기 위해서 최적 소재의 선정, PET필름의 특성평가, 최적 라미네이팅 공정조건 확립, 첨가제 선정 및 가공조건 확립 등에 대해서 실험고찰을 하였으며, 얻어진 주요 결과는 다음과 같다. (1) 신발의 갑피용 및 안창용 최적소재로서 경편직물을 선정하였으며, PET필름의 최적 요구특성은 내수성 9460mmH2O, 투습성 10,000g/m2/24hrs, 인장강도42kgf/cm2, 신도249% 였다. (2) Hot-melt 라미네이팅 공정에서의 투습방수성을 좌우하는 Dot roll No, Coating gap의 최적조건은 CP75(Engraved dot roll no), -0.2mm(Coating Unit gap) 였다. (3) EVA base polymer 및 기타 조제의 최적 배합비를 확립하고 이를 바탕으로 compound를 제조하여 Press로 molding하여 안창용 Sponge를 얻었다. (4) 안창 sponge 위에 점착된 knit 소재의 소취효과는 우수하였으며, 갑피용 투습방수 경편직물의 보온성도$15{\sim}20%$로 우수하였다.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.91-97
• /
• 1984

This study was performed to suggest the basic information for the development of covering method for increasing the effect of heat conservation in the unheated vinyl houses. Double and single covered vinyl houses were constructed and the inside temperature variation of the double covered vinyl house was compared to the single covered vinyl house. The results obtained for the vinyl houses were summarized as follows ; 1. With the outside temperature of $-1.0^{\circ}C{\sim}7.5^{\circ}C$ and the solar radiation of maximum $1.02MJ/m^2$, the double covered vinyl house was shown $1.2^{\circ}C$ higher than the single covered vinyl house in the daily mean of inside temperature. 2. The inside temperature of the double covered vinyl house was $2.3^{\circ}C$ higher in the daytime and $1.2^{\circ}C$ higher in the nighttime than that of the single covered vinyl house. 3. The inside temperature of the vinyl house were expressed by the formular (1)-(6) with the outside temperature and by the formular (7)-(10) with the solar radiation. 4. In the effect of heat conservation based on the outside temperature, the double covered vinyl house was 1.2 times in the daytime and 1.76 times in the nighttime in comparison with the single covered vinyl house.

• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.47-52
• /
• 2010

This study was carried out to investigate the availability of covering material used for raising seedlings in the rice nursery bed. The pre-germinated seeds of a rice cultivar 'Chilbo' were sown into seedling tray ($60{\times}30{\times}2.5cm$) on 20th April and 3rd May 2010. Polypropylene spunbonded fabric (PSF) and lagging were used for covering materials in rice nursery bed. The growth characteristics of seedlings were evaluated at 8, 15 and 25 days after sowing (DAS) in the nursery beds covered with PSF and lagging, respectively. The plant height of 8-day old seedlings grown in lagging nursery bed was longer by 2cm than those in PSF nursery bed when the seeds were sown on 20th April, but seedling quality grown in lagging nursery bed was poor compared with that in PSF nursery bed. The growth characteristics of 15-day old seedlings were similar to that of 8-day old seedlings. The plant height of 8, 15 and 25-day old seedlings grown in lagging nursery was longer than those in PSF nursery when the seeds were sown on 3rd May. The seedling quality grown in PSF nursery was better than that in lagging nursery. The seedlings grown in PSF nursery have more leaves and better seedling quality compared with that of lagging nursery. The seedling quality was remarkably decreased with the increase of nursery period in lagging bed but seedlings quality were recovered at 5 days after hardening treatment by removing the lagging.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.261-272
• /
• 2021

The purpose of the present study was to evaluate the thermal insulation of air-filled winter jackets according to the amount of air-filler using a thermal manikin. The insulation of these jackets' was compared to a down padded jacket with an identical design and size. The amounts of air-filler were 100% (26,219 cm³), 70% (18,645 cm³), 50% (13,110 cm³), and 0% (0 cm³). The results showed that a clothing insulation (Icl) of 0%, 50%, 70%, and 100% air, and 100% down jackets was 0.208, 0.243, 0.207, 0.176, and 0.315 clo, respectively. In addition, the down jacket with waisttaped had a clothing insulation of 0.369 clo. However, the highest value of clothing insulation per clothing weight was the 50% air-filled jacket in all conditions. In terms of regional power consumption of the thermal manikin, the down jacket consumed less power for the shoulder and chest than the air-filled jackets. In conclusion, in order to maximize the thermal insulation of air-filled jackets, an optimal amount of air-filler, that is, an amount which does not compromise (break) the layer of inner air between the surface of manikin and the lining of the jacket, should be explored. Further studies on lining materials, end-closed design, and changes in thermal insulation under the conditions of strong wind or heavy snow are recommended.