• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.81-88
• /
• 2019

In this study, the effects of graphene oxide (GO) addition on electromigration (EM) lifetime of Sn-3.0Ag-0.5Cu Pb-free solder joint between a ball grid array (BGA) package and printed circuit board (PCB) were investigated. After as-bonded, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) was formed at the interface of package side finished with electroplated Ni/Au, while $Cu_6Sn_5$ IMC was formed at the interface of OSP-treated PCB side. Mean time to failure of solder joint without GO solder joint under $130^{\circ}C$ with a current density of $1.0{\times}10^3A/cm^2$ was 189.9 hrs and that with GO was 367.1 hrs. EM open failure was occurred at the interface of PCB side with smaller pad diameter than that of package side due to Cu consumption by electrons flow. Meanwhile, we observed that the added GO was distributed at the interface between $Cu_6Sn_5$ IMC and solder. Therefore, we assumed that EM reliability of solder joint with GO was superior to that of without GO by suppressing the Cu diffusion at current crowding regions.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.367-371
• /
• 2019

In this study, we proposed the sacrificial anode cathodic protection method as a countermeasure to reduce the corrosion of railway rails under oceanic climatic conditions and proved the anticorrosive effect experimentally. In addition, the proposed sacrificial anode cathodic protection method were tested on site to examine long-term rail corrosion monitoring and field applicability for more than 26 months and to prove the effectiveness of rail corrosion. As a result of monitoring the corrosion state using the cellophane tape method, the appearance of the applied sections with sacrificial anode cathodic protection method was good at the present time about 26 months after the field test laying, and no abnormalities and other abnormalities of the rail welded section and the rail web were found. Hence, in places where no sacrificial anodes were installed, rust progressed rapidly. In addition, the proper spacing of sacrificial anodes was found to form the most stable corrosion coating at 1.0 ~ 1.5m. After about 26 months of monitoring, the installation of sacrificial anodes could help stabilize the overall rail corrosion level, even if the spacing was somewhat wider.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.115-131
• /
• 2018

Extension plate attached PHC piles and bolts spliced PHC piles were installed in field test site. Pile integrities were checked during installation with dynamic pile test and the actual pile conditions after installation were compared with integrity index (${\beta}$ index) by PDA test. Theoretically the break in near pile end or pile end (especially extension plate itself) was very difficult to access by integrity index (${\beta}$ index) and also require a high level of knowledge and field experience on PDA test. First actual wave equation of bolts spliced PHC piles due to bolts spliced equipment can be different with welding spliced. Second wave length of the stress wave from installing can be longer than the height of bolts spliced equipment (about 100 mm). Third Beta processing in PDA analysis function is very difficult to access without a high level of knowledge and field experience on wave equation. Above-mentioned three reasons can make conclusion that traditional PDA test in domestic site can not access the integrity of bolts spliced equipment in bolts spliced PHC piles.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.665-672
• /
• 2013

With the development of advanced processing technology, laser processing systems, which require high-quality precision processing, have attracted considerable attention. Although laser equipment is expensive, it enables quick processing and less deformation of materials. This technology is often applied to secondary batteries, which has thus farinvolved the use of argon tungsten inert gas (TIG) welding. However, the welding characteristics of argon TIG welding are not yet good, and a laser is used for welding to address this problem. In this study, lap-joint welding was conducted, and the desired welding characteristics were obtained when the laser power was 1800W and the laser beam travel speed was 1.8 m/min. Lap-joint welding was conducted on Ni-coated SS41. Two cases were compared. No pores were observed in the Ni-coated SS41 lap-joint welding part, and cracks appeared from the lap-joints. Moreover, the pole rod and tap were welded together in a T-joint form to improve the output of the secondary battery. T-joint laser welding showed better welding characteristics than TIG welding.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.46-55
• /
• 2003

TiO$_2$-WO$_3$(8.2wt%) coatings were prepared by the APS (Atmospheric Plasma Spraying) process to clarify the relationship between the process parameters(H$_2$ gas flow rate of plasma 2nd gas and spraying distance) of the APS coating and photo-decomposition efficiency kinetics of the MB(methylene blue) aqueous solution decomposition and to understand the effect of addition of WO$_3$ on photocatalytic properties of TiO$_2$ sprayed coating. Further, the temperature and velocity of flying particles were measured by DPV-2000 to investigate the relationship between microstructure of coatings and process parameters. Properties of coatins were investigated by XRD, SEM, XPS, RAMAN, UV/VIS spectrometer. In case of the TiO$_2$-WO$_3$(8.2wt%) coating, it had a lower anatase fraction than that of pure-TiO$_2$ coatings because of flying in the higher temperature plasma plume by the heavy weight of TiO$_2$, WO$_3$. And, when WO$_3$ added powders were spayed, the doping effects of W ions substituted into the Ti ion sites was not occured during melting and solidification cycles of spraying. It was found that the addition of WO$_3$ was ineffective effective on increasing photo-decomposition efficiency of TiO$_2$ sprayed coating.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1901-1907
• /
• 2010

A hydraulic cylinder is a primary component of an excavator and is used for activating attachments such as boom, arm, and bucket. Generally, the cylinder is prone to structural problems such as buckling and fatigue failure caused by cyclic high pressure. Therefore, the safety margin for fatigue, yield, and buckling during the design lifetime should be evaluated at the durability-design stage. The durability design includes basic and detailed stages. In the basic design, the principal dimensions of the rod and tube are determined by considering the working force, speed, and range with respect to yield and buckling. In the detailed design, the dimensions of the rod notch, welds, tube end, gland, orifice, and cushion ring are determined by considering the fatigue safety. We present and discuss the overall procedure for durability design and the related analysis techniques.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.184-184
• /
• 2011

선로의 레일은 재료적인 특성과 현장의 많은 주변 요소에 의한 불확실성이 매우 높은 시스템으로 결함의 위험이 상존한다. 결함 발생과 조치에 따라 영업손실로 이어지므로 레일 결함 발생과 동시에 적절한 조치가 요구된다. 따라서 레일결함 발생 시 레일교환시기를 파악하는 것이 선로관리비용을 줄일 수 있으며 레일교환에 대한 신속한 판단을 위함 관리기준을 정립하는 것이 요구된다. 현재 국내에서 고속선의 경우 관리 기준이 있으나, 일반철도는 없는 실정이다. 본 연구는 차후 일반철도 180km/h 속도상승을 계획하고 있는 현 시점에 국외 관리기준을 분석하여 결함관리기준을 정립에 기여하고자 한다. 국내의 경우, 2004. 4. 1 프랑스 기술을 전수받아 개통한 고속선은 프랑스 레일관리기준을 적용한 "레일손상 등급별 관리기준"을 제정하여 레일관리를 시행하고 있다. 국외의 경우, INNOTRACK프로젝트 안에서 관련된 다른 IM(Infrastructure Managers, 사회기반시설 관리자들)에게 최근의 활동과 변화의 이해를 제공하기 위해서, 선택된 결함들의 최소조치들의 조사가 Network Rail, OBB, Prorail, Banverket 그리고 DB에서 수행되고 있으며 UIC 지침에도 포함되고 있다. 모든 최소조치 원칙은 초음파나 육안에 의해 발견된 길이나 초음파 또는 와류탐상기(eddy current system)를 이용한 깊이에 대한 제한(limits)을 준다. 또한 침목과 이음매 또는 용접부에 관한 위치에 관한 결함의 제한이 있다. 명시된 기간은 즉각적일 수도 있으며, 보통 속도 제한이나 비상 죔쇠(Clamps)같은 경감시키는 수단에 적용될 수 있으며, 또는 더 긴 기간이 될 수도 있다. 더 긴 기간들은 수리나 레일 교체를 통하여 선로로부터 결함이 제거되어야 하는 최대의 시간이다. 본 연구에서는 Transverse Breaks, Squats, Head Checks 3가지 결함 유형에 대해 각 국에서 사용하는 최소 조치를 비교하여 분석하였다. 분석결과, 유럽에서는 레일결함에 대하여 깊이 있는 연구를 통하여 관리기준을 정하여 관리하고 있으며 이에 따라 상세하고 구체적인 레일 관리가 가능하므로 효율적이며 안전성이 제고되는 것으로 판단된다. 차후 일반철도의 180km/h 속도상승을 계획하고 있는 현 시점에서 국내철도 일반선 여건에 적합한 레일결함관리기준을 정립하기 위한 추가적인 연구가 필요할 것으로 판단된다.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.111-118
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality, Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FLC(fuzzy logic control), The parameters of input membership functions and those of consequence functions in FLC were tuned through the method of learning by backpropagation algorithm, Bead geometry could he reasoned from welding current, arc voltage, travel speed on FLC using the results learned by neural networks. On the developed inference system of bead geometry using neuo-fuzzy algorithm, the inference error percent of bead width was within ${\pm}4%$, that of bead height was within ${\pm}3%$, and that of penetration was within ${\pm}8%$, Neural networks came into effect to find the parameters of input membership functions and those of consequence in FLC. Therefore the inference system of welding quality expects to be developed through proposed algorithm.