• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.49-56
• /
• 2010

In the pyroprocessing of spent nuclear fuels, LiCl-KCl waste salt containing radioactive rare earth chlorides are generated. The radioactive rare earth oxides are recovered by co-oxidative precipitation of rare earth elements. The powder phase of rare eath oxide waste must be immobilized to produce a monolithic wasteform suitable for storage and ultimate disposal. The immobilization of these waste developed in this study involves a solid state sintering of the waste with host borosilicate glass and zinc titanate based ceramic matrix(ZIT). And the rare-earth monazite which synthesised by reaction of ammonium di-hydrogen phosphate with the rare earth oxides waste, were immobilzed with the borosilicate glass. It is shown that the developed ZIT ceramic wasteform is highly resistant the leaching process, high density and thermal conductivity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.171-177
• /
• 2007

This study suggested a new method to stabilize molten salt wastes generated from the pyre-process for the spent fuel treatment. Using conventional sol-gel process, $SiO_2-Al_2O_3-P_2O_5$ (SAP) inorganic material that is reactive to metal chlorides were prepared. In this paper, the reactivity of SAP with the metal chlorides at $650{\sim}850$, the thermal stability of reaction products and their leach-resistance under the PCT-A test method were investigated. Alkali metal chlorides were converted into metal aluminosilicate($LixAlxSi1-_xO_{2-x}$) and metal phosphate($Li_3PO_4\;and\;Cs_2AlP_3O_{10}$) While alkali earth and rare earth chlorides were changed into only metal phosphates ($Sr_5(PO_4)_3Cl\;and\;CePO_4$). The conversion rate was about $96{\sim}99%$ at a salt waste/SAP weight ratio of 0.5 and a weight loss up to $1100^{\circ}C$ measured by thermogravimetric analysis were below 1wt%. The leach rates of Cs and Sr under the PCT-A test condition were about $10^{-2}g/m^2\;day\;and\;10^{-4}g/m^2\;day$. From these results, it could be concluded that SAP can be considered as an effective stabilizer for metal chlorides and the method using SAP will give a chance to reduce the volume of salt wasteform for the final disposal through further researches.

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.351-356
• /
• 1996

The quartemary system ceramics 0.5[xPb(Zn$_{1}$3/Nb$_{2}$3/)O$_{3}$-(1-x)Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_{3}$]-0.5[yPbTiO$_{3}$-(1-y) PbZrO$_{3}$ for piezoelectric actuators were prepared bv the were added to the raw materials up to 5 mole. Sintering temperature was varied form 1000.deg. C to 1200.deg. C. Sintering characteristrics, dielectric and piezoelectric properties were then investigated. Piezoelectric properties of sample prepared by the molten salt method were improved compared to those prepared by the conventional method. Addition of PZN shifted morphotropic phase boundary to more Zr-rich composition and decreased the piezoelectric properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.378-383
• /
• 1998

Microstructure and additive effect of Lead Zirconate-Titanate(PZT) ceramics prepared by molten salt synthesis method with additives $Nb_2O_5, Fe_2O_3$ and MnO were investigated.The grain PZT ceramics ws decreased with the increase $Nb^{5+} or Fe^{3+}$ while increased with the increase $Mn^{2+}$ addition. The relative resistivity of PZT ceramics was increased with the increase $Mn^{5+}$ addition, while decreased with the increase $Mn^{2+}$ addition. And the dielectric and the piezoelectric constant of PZT ceramics showed 2,100 and 342pC/N at $Mn^{5+}$ addition of 0.75 mol%, respectively.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.23-33
• /
• 1999

용융탄산염 연료전지의 대형화에 관한 기본 기술을 확립하기 위하여 전극의 유효면적이 625 $\textrm{cm}^2$인 단위전지를 20단 적층한 내부 분배형 용융탄산염 연료전지 스택을 제작하고 그 성능을 살펴보았다. 연료로 72% H2/18% CO2/10% H2O를 , 산화제로는 70% air/30% CO2의 혼합 기체를 사용하여 운전한 결과 전류밀도가 150 mA/$\textrm{cm}^2$이고 연료 및 산화제의 이용율이 0.4일 때, 스택 전압이 16.62 V로 1.56 kW의 높은 초기출력을 나타내었다. 스택 내 분리판에서의 온도 분포는 가스 흐름 방향으로 온도가 증가하였으며 스택출력이 높아질수록 가스 배출 부분의 온도가 상승하였다. 스택 내 각 단위전지간의 성능 분포는 균일하지 않았으며, 가스이용율에 따라 그 편차가 증가하였다. 연속 운전 300시간 후부터 스택의 성능이 감소하였으며, 그 원인을 분석한 겨로가 탄소 석출과 부식 생성물에 의한 전기 단락 때문으로 밝혀졌다. 본 연구를 통하여 anode 출구에서의 가스 조성을 분석함으로써 전기 단락에 의한 전압 손실량을 계산하는 기법을 확립하였다. 또한 본 연구에서 얻은 결과를 통하여 향후 스택의 대형화와 장수명화에 대한 대책을 제시하였다.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.203-210
• /
• 2010

NiO is commonly used as the cathode for the molten carbonate fuel cell due to its stability and high electrical conductivity in molten carbonates and oxygen atmosphere. However, long-term operation of MCFC has a serious problem which is the degradation of cathode material, the so-called Ni dissolution. In the present study, we have attempted to synthesize a new alternative cathode material as Co/Nb-coated NiO cathode. The results obtained in this study suggest that the Co/Nb-coated NiO cathode can be utilized as having lower dissolution and higher cell performance than those of the pure NiO cathode.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.38-38
• /
• 1999

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.336-337
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.301-302
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.243-244
• /
• 2010