• Journal of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.413-420
• /
• 1980

Die Geschwindigkeitskonstanten der Solvolyse-Reaktionen von 9-Chlormethylanthracen wurden bei verschiedenen Temperaturen in unterschiedlichen binadren Losungsmittelgemischen (Wasser/Aceton, Wasser/Acetonitril, Wasser/Methanol, Wasser/Athanol) mit Hilfe der Leitfahigkeitsmeßungen bestimmt. Die Aktivierungsparameter $E_a$, ${\Delta}H^{\neq}$ und ${\Delta}S^{\neq}$ wurden berechnet. Die Meßergebnisse deuten darauf hin, daß die Solvolyse von 9-Chlormethylanthracen in protonischen Losungsmitteln schneller ablauft als in aprotonischen Losungsmitteln; in den Meßreihen mit protonsichen bzw. mit aprotonischen Losungsmitteln steigt die Reaktionsgeschwindigkeit mit der Zunahme der Dielektrizitatskonstanten des Losungsmittels an, und die Aktivierungsparameter nehmen mit steigendem Wassergehalt zu. Es wurde festgestellt, daß die Reaktion nach einem $S_N1$-Mechanismus ablauft. Die experimentellen Daten deuten darauf hin, daß Wasser einerseits als Nucleophil und andererseits als allgemeine Base am Reaktionsmechanismus beteiligt ist.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.239-246
• /
• 1999

Side wall samples from a used automotive tire were subjected to subcritical and supercritical decomposition and extraction with three solvents, water, 28% ammonia solution and ammonia. For 6mm cube samples the rate of supercritical extraction with water followed a first-order kinetics with an activation energy of 140 kJ/mol. Solvent power of 28% ammonia so lotion at supercritical condition was found to be higher than supercritical water at initial extraction as pressure decreased. These phenomena were considered to be an effect of ammonia involved in water.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.288-294
• /
• 1980

Methanolysis rate constants were determined for $CH_3O(CO)Cl,\;CH_3S(CO)Cl\;and\;CH_3S(CS)Cl\;in\;CH_3OH-CH_3CN$ mixtures. Results show that the rates are not predominantly influenced by the bulk solvent properties but are partly influenced by specific electrophilic solvation.Polarity of the solvent is not a dominant factor but it nevertheless plays a role in charge stabilization of the $S_N1$ like transition state. The methanolysis proceeds through $S_N1$ mechanism for $CH_3S(CS)Cl$ for which both specific solvation of leaving group by methanol and charge stabilization by a high dielectric medium are important, while for $CH_3O(CO)Cl\;methanolysis occurs\;via\;S_N2$ mechanism in which both of the solvent effects are unimportant.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.177-181
• /
• 1982

This experiment was carried out to investigate the stability of Dicofol solutions which were prepared with various organic solvents such as xylene, toluene, methylisobutyl ketone (M.I.B.K.), cyclohexanone, N.N.-dimetyl formamide (N.N.-D.M.F.) and isophorone under different temperature and storage period. The decomposition rate of Dicofol was increased in the order of cyclohexanone> N.N.-D.M.F.>W.P.>toluene, xylene, M.I.B.K. and isophorone. However, it was shown that precipitation was found in Dicofol solutions such as xylene, toluene and M.I..B.K. except isophorone. Therefore, isophorone was recognized as the best of organic solvents tested for Dicofol in the case of emulsifiable concentrate formulation with it.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.325-334
• /
• 2009

Many bacteria that are capable to tolerate and degrade organic solvents have been isolated from seawater. However, their roles in the biodegradation of organic solvents in the marine environment have remained unknown. Aeromonas hydrophila IB$B_{ct4}$, isolated from Constanta seawater, was able to tolerate and degrade different organic solvents. Toluene, styrene, xylene isomers, ethylbenzene, with the logarithm of the partition coefficient in octanol-water mixture (log $P_{ow}$) between 2.64 and 3.17, were more toxic for bacterial cells, compared with propylbenzene, n-hexane, n-heptane, with log $P_{ow}$ between 3.69 and 4.39. There were revealed cellular and molecular modifications induced by organic solvents to Aeromonas hydrophila IB$B_{ct4}$. The study of cellular and molecular modifications induced by different organic solvents showed a complex response of bacterial cells to the presence of organic solvents in the culture media.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.228-236
• /
• 2016

The purpose of this study was to determine the optimum conditions of solvent extraction type and solvent concentration (60, 70, 80%, v/v), extraction time (30, 80, 130 mins) and extraction temperature (10, 15, $20^{\circ}C$) in order to increase the antioxidant activity of the chia seed. The total polyphenol content and DPPH radical scavenging activity was measured by using response surface methodology (RSM) to establish the optimal conditions. Using ethanol and methanol extractions at extraction concentrations of 60%, and time and temperature of 130 mins and $20^{\circ}C$, the maximum total polyphenol content was 871.00 mg% ($R^2=0.9507$) and 557.70 mg% ($R^2=0.9784$) for ethanol and methanol extraction respectively. Using the same extraction conditions, the maximum level of DPPH radical scavenging activity was 72.14% ($R^2=0.9675$) and 52.79% ($R^2=0.9524$) for ethanol and methanol extraction respectively. The results indicate that ethanol extracts showed a higher antioxidant activity than methanol extracts. The ethanol extraction conditions of response surface analysis (RSA) were affected more by ethanol concentration than by extraction time or temperature. In contrast, the methanol extraction conditions of response surface analysis (RSA) were affected more by extraction time. Based on the RSM, the optimum ethanol extraction conditions were the following: extraction concentration, 63%: time, 100 mins: and temperature, $18^{\circ}C$. The optimum methanol extraction conditions were the following: extraction concentration, 65%; time, 120 mins; and temperature, $16^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.695-701
• /
• 1993

Rate constants of solvolysis of 2-thiophenesulfonyl chloride were determined in aqueous binary mixtures with methanol, ethanol, acetone in water and in methanol. These data are interpreted using the equation of Grunwald-Winstein and Kivinen relationship. Also, kinetic solvent isotope effects in water and in methanol and product selectivities in alcohol-water mixtures were determined. Kinetic solvent isotope effect for hydrolysis of 2-thiopenesulfonyl chloride was 2.24 and 1.47 for methanol and water, respectively. Selectivity values for formation of ester relative to acid in ethanol-water mixtures show maximum S value. From kinetic solvent isotope effect in methanol and water, selectivity data in aqueous alcoholic solvents and solvent effects, it is proposed that the reaction channel favoured in low polarity solvents is general-base catalysis and/or is possibly addition elimination (S$_A$N) reaction pathway and in high polarity solvents iS S$_N$2 reaction mechanism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.293-299
• /
• 2020

This study was undertaken to optimize combining the processes of enzymatic hydrolysis and extraction for lycopene production from autumn olive berry. The autumn olive berry was pulverized and suspended in water, followed by treatment with various hydrolytic enzymes including Ceremix, Celluclast, AMG, Viscozyme, Pectinex, Promozyme, Ultraflo and Tunicase. Reaction solutions were subjected to extraction by applying different organic solvents including acetone, ethyl acetate, hexane and chloroform. Highest yields of lycopene extraction were obtained with the Ceremix (hydrolysis enzyme) and chloroform (extraction solvent) combination. Subsequently, using this ideal combination, enzymatic hydrolysis conditions, including enzyme concentration, pH and temperature, were statistically optimized to 0.58%, 5.5 and 54.4℃, respectively, by applying the response surface method. The lycopene extraction yield increased 2.3-fold (22.6 mg/100g) by using the selected combined process. We propose that these results could be used for the future development of bioactive materials required for bio-health care products.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.761-762
• /
• 2000

Waste newspaper is many part of Municipal Solid Waste(MSW). Newspaper consist of cellulose, hemicellulose and lignin which biomass components. We could get various compound usable as fuel when pyrolysis of lignin. Therefore, we should get similar phenomena with pyrolysis of newspaper. Highest conversion rate when acetone was used as pyrolysis solvent was $350 {\sim}400^{\circ}C$, $40{\sim}50$minutes.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.333-339
• /
• 1976

The rates of solvolysis for 2-thenoyl chloride have been measured in aqueous acetone and aqueous ethanol at various temperatures ranging from 20 to $40^{circ}C$. The activation parameters and the Grundwald-Winstein's slope are determined by the analysis of solvolysis rates. The results indicated that the reaction rates of solvolysis are considerably slower than those of the reaction for benzoyl chloride due to the electron donating effect of thiophene nucleus. The results also showed that the reaction proceeds with the $S_N1$ mechanism in water-rich solvents whereas the $S_N2$ character increases with the decrease of water content, and overall reaction is subject to entropy control.