• Clean Technology
• /
• 제28권3호
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Analytical Science and Technology
• /
• 제17권4호
• /
• pp.322-336
• /
• 2004

The improved derivatization technique of tamoxifen metabolite in human urine is described for the acylation method that they are substituted by derivatization reagent like acyl anhydride for use of gas chromatography/mass spectrometry. The hydroxyl group of tamoxifen metabolite was derivatized by trifluoroacetic anhydride (TFAA), pentafluoroacetic anhydride (PFPA) and heptaflorobutylic anhydride (HFBA). It was investigated to the gas chromatography/mass spectrometry (GC/MS) technique use negative ion chemical ionization (NCI), positive ion chemical ionization (PCI) and electron impact (EI). In acylation of the metabolites of tamoxifen, the effective reaction temperature and time were shown to be at $50^{\circ}C$ for 30 min. The 4-hydroxytamoxifen, which is known to major metabolite of tamoxifen, was not detected in human urine, whileas the hydroxymethoxytamoxifen was detected. We thought that this result was from the single dose of tamoxifen.

• Clean Technology
• /
• 제27권2호
• /
• pp.190-197
• /
• 2021

Kraft lignin is a by-product of the pulp and paper industry, obtained as a black liquor after the extraction of cellulose from wood through the Kraft pulping process. Right now, kraft lignin is utilized as a low-grade boiler fuel to provide heat and power but can be converted into high-calorific biofuels or high-value chemicals once the efficient catalytic depolymerization process is developed. In this work, the multi-functional catalyst of Ru-Mg-Al-oxide, which contains hydrogenation metals, acid, and base sites for the effective depolymerization of kraft lignin are prepared, and its lignin depolymerization efficiency is evaluated. In order to understand the role of different active sites in the lignin depolymerization, the three different catalysts of MgO, Mg-Al-oxide, and Ru-Mg-Al-oxide were synthesized, and their lignin depolymerization activity was compared in terms of the yield and the average molecular weight of bio-oil, as well as the yield of phenolic monomers contained in the bio-oil. Among the catalysts tested, the Ru-Mg-Al-oxide catalyst exhibited the highest yield of bio-oil and phenolic monomers due to the synergy between active sites. Furthermore, in order to maximize the extent of lignin depolymerization over the Ru-Mg-Al-oxide, the effects of reaction conditions (i.e., temperature, time, and catalyst loading amount) on the lignin depolymerization were investigated. Overall, the highest bio-oil yield of 72% and the 3.5 times higher yield of phenolic monomers than that without a catalyst were successfully achieved at 350 ℃ and 10% catalyst loading after 4 h reaction time.

• Applied Chemistry for Engineering
• /
• 제17권2호
• /
• pp.132-137
• /
• 2006

Polyurethane acrylate hybrid emulsions were prepared by seeded polymerization techniques. In the synthesis, seeded polyurethane dispersion containing a carboxylic group was used to endow hydrophilicity to the hybrid emulsion and various acrylates such as methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) and acrylic acid (AAc) were used to endow hydrophobicity. The particle size and distribution of various emulsion particles such as polyurethane acrylate hybrid emulsion, polyurethane dispersion homopolymer, acrylate emulsion, and physical blending emulsion were measured by a particle size analyzer. The average particle size of hybrid emulsion was greater than physical blending emulsion. And tensile strength, 100% modulus, elongation, and swelling properties of the polyurethane acrylate hybrid emulsion were studied and compared with those of polyurethane homopolymer, acrylate emulsion, and physically blended compositor, respectively. To improve chemical and physical resistance, this paper review a melamine hardener and compares it for effects on the physical properties of cured coating.

• Analytical Science and Technology
• /
• 제18권5호
• /
• pp.403-409
• /
• 2005

Polycyclic Aromatic Hydrocarbons(PAHs) contamination arises from several sources including processing of food(smoking, direct drying, cooking) and environmental contamination of air, water, or soil, the later being considered as the most important. In this study, to establish the analytical method for some PAHs[benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in fish, alkali digestion time, extraction solvents, elution volume of florisil cartridge for clean-up have been optimized. The methodology involved saponification and extraction with n-hexane, clean-up on Sep-Pak florisil cartridges and determination by HPLC/FLD(High Performance Liquid Chromatography/Fluorescence Detector). Overall method recoveries for 8 PAHs spiked into these products ranged from 90 to 106%.

• Applied Chemistry for Engineering
• /
• 제21권6호
• /
• pp.689-693
• /
• 2010

When natural rubber dissolved in toluene comes into use as a binder of carbon powder, the volatilization of solvent just after the construction of biosensor brought the mechanical robustness on the paste. This characteristic satisfied the pre-requisite condition for the practical use of carbon paste electrode and a biosensor for the determination of hydrogen peroxide was designed. In order to evaluate its electrochemical qualitative and quantitative behaviors, various electrochemical kinetic parameters of the electrode, e.g. the symmetry factor (${\alpha}$, 0.37), the exchange current density ($i_0$, $0.075mAcm^{-2}$), the capacitance of double layer ($C_d$, $9.7{\times}10^{-3}F$), the time constant (${\tau}_A$, 0.92 s), the maximum current ($i_{max}$, $5.92{\times}10^{-7}Acm^{-2}$), the Michaelis constant ($K_M$, $1.99{\times}10^{-3}M$) and others were investigated. Results show that natural rubber is a promising binder of carbon powder.

• Applied Chemistry for Engineering
• /
• 제26권4호
• /
• pp.445-451
• /
• 2015

Semi-flexible liquid crystalline polymers containing a mesogenic group and an octamethylene flexible spacer in the main chain were synthesized by solution polycondensation. The mesogenic group in the polymer consists of four aromatic rings connected by ester and ketone, ether, sulfide, methylene, sulfone, or isopropylidene linkage groups. This paper discusses effects of the central linker of the mesogenic group on polymer properties. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), and polarizing optical microscope (POM). Polymers having bent linkage groups exhibited low thermal transition temperatures, narrow mesophase temperature ranges, low liquid crystallinity, and good solubilities in organic solvents, while those having bulky linkage groups were amorphous and exhibited high glass transition temperatures.

• Applied Biological Chemistry
• /
• 제50권4호
• /
• pp.344-347
• /
• 2007

The aerial parts of Lespedeza cuneata were collected, air-dried and extracted with 95% aqueous EtOH. Then it was successively partitioned with n-hexane, $CH_2Cl_2$, EtOAc and $H_2O$. Repeated Sephadex LH-20 column chromatography on the EtOAc- and $H_2O-soluble$ fractions gave four compounds. Their structures were elucidated as quercetin (1), kaempferol (2), desmodin (3) and homoadonivernith (4) on the basis of spectroscopic evidences such as $^{1}H-NMR$, $^{13}C-NMR$, 2D-NMR and MS spectrum. Desmodin (3) and homoadonivernith (4) have not been reported from this plant so far.

• Journal of the Korean Ceramic Society
• /
• 제39권3호
• /
• pp.321-326
• /
• 2002

ZnWO$_4$ nano-powders were successfully prepared by polymerized complex method using zinc nitrate and tungstic acid as starting materials. In order to investigate the thermal decomposition and crystallization process, the polymeric precursors were heat-treated at temperatures from 300 to 600$^{\circ}$C for 3 h, and the heat-treated powders were characterized by XRD and FTIR. The surface morphology of the heat-treated powders were observed using SEM and TEM. The crystallite size was measured by X-ray analysis. Crystallization of the ZnWO$_4$ powders were detected at 400$^{\circ}$C and entirely completed at a temperature of 600$^{\circ}$C. The particles heat-treated 400 and 500$^{\circ}$C showed primarily co-mixed morphology with spherical and silkworm-like forms, while the particles heat-treated at 600$^{\circ}$C showed more homogeneous morphology. The average crystalline size were 19.9∼24.nm showing an ordinary tendency to increase with the temperatures from 400 to 600$^{\circ}$C.

• Applied Chemistry for Engineering
• /
• 제17권4호
• /
• pp.375-380
• /
• 2006

In the paper, lipophilic derivatives of $\beta$-sitosterol, which are known to have a potential to reduce blood cholesterol level, were synthesized by the esterification of $\beta$-sitosterol and fatty acids. When the esterification reactions using stearic acid, oleic acid or linoleic acid as fatty acids were carried out in the presence of an acidic catalyst, the reaction for unsaturated fatty acids such as oleic acid and linoleic acid afforded a significant amount of side products which may be produced by oxidation of unsaturated groups. On the other hand, esterification reactions in the presence of dehydrating agents and a basic catalyst gave pure products regardless of the nature of fatty acids. The solubilities of lipophilic derivatives of $\beta$-sitostero to organic solvents and edible oil were observed to increase as the degree of unsaturation of fatty acids increases.