• Title/Summary/Keyword: 용량성 부하

Search Result 564, Processing Time 0.03 seconds

A Method to Select Optimal Size of Multiple Distributed Generation System by Using the Reduced Multivariate Polynomial Model (RMP 기법을 사용한 복수 분산전원 시스템의 용량선정 최적화 방법)

  • Lee, Soo-Hyoung;Park, Jung-Wook
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.56_57
    • /
    • 2009
  • 전력설비의 증설 없이 지속적으로 증가하는 부하는 전력계통의 안정성 및 신뢰성 확보를 어렵게 하며, 송전으로 인한 전력손실을 급격하게 증가시킨다. 비용 및 환경적인 측면에서, 분산전원은 야기되는 문제의 해결책이 될 수 있으며, 분산전원의 연계로 얻어지는 전력계통의 안정도 및 신뢰도 향상과 전력손실 감소는 연계되는 분산전원의 용량에 의해 결정이 된다. 따라서 최적용량 선정문제는 분산전원을 전력계통에 연계하기 위해 필수적으로 선행되어야 할 과제이나, 현재까지 이를 명확하게 해결한 체계적 방법은 개발되지 않았다. 이번 연구는 reduced multivariate polynomial (RMP)모델을 이용한 계통연계 복수 분산전원 시스템의 최적용량 선정 방법을 제안하며, 최적용량 선정을 위해 요구되는 시스템 자원을 획기적으로 감소시킨다.

  • PDF

A Study on the Generation Capacity and Cost Analysis of Solar-Wind Hybrid Power System (태양광-풍력 복합발전시스템의 용량 산정과 경제성 분석에 관한 연구)

  • Kim, Jong-Hwan;Lee, Seung-Chul;Kwon, Byeong-Gook;Oh, Hae-Jin
    • Proceedings of the KIEE Conference
    • /
    • 2003.11a
    • /
    • pp.348-350
    • /
    • 2003
  • 본 논문에서는 태양광-풍력 복합발전시스템의 발전용량 예측을 통한 시스템 시설투자비 및 발전단가와 경제성에 대하여 분석한다. 도시지역의 일사량 및 풍속 데이터를 기초로 하여 복합발전시스템의 일일 발전량을 구하고, 수용가의 일일부하패턴과 수요부하를 고려하여 태양전지 어레이와 풍력발전기의 용량을 산정한다. 그리고 용량 산정에 따른 복합발전시스템의 초기투자비용과 연간 발전량, 연간 소요경비 등의 요소를 고려하여 총 수명가 분석법(Total Life-Cycle Cost Analysis)에 기초한 발전단가를 계산하고 잉여전력을 계통에 판매할 경우의 경제성을 평가한다.

  • PDF

Measurement of the indoor power line channel characteristic (옥내 전력선 통신 채널 특성 측정)

  • Heo, Yun-Seok
    • The Journal of Information Technology
    • /
    • v.7 no.3
    • /
    • pp.1-10
    • /
    • 2004
  • Considerable efforts has been recently devoted to the determination of accurate channel models for the Power Line environment, both for the indoor and outdoor cases. The common denominator and limitation of the known and previously published models is the particular type of approach followed. In this paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for indoor network. We accomplished a channel modelling by the frequency response method about the total 224 capacitor load cases. On the basis of this measurement modeling it is here revealed that the PLC is a more deterministic media that commonly believed.

  • PDF

A Simple Average Power Theory and Modified Compensation Performance Evaluation of Active Power Filters (능동전력필터의 간단한 평균전력이론과 수정된 보상성능 평가법)

  • 정영국;임영철;양승학
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.3
    • /
    • pp.64-72
    • /
    • 1999
  • The fictitious power theory in time domain is very easy to understand, but power analyzing speed of active power is increased, because power is analyzed using signal tedmiques based on the corre1ation between voltage and current wavefonns. Also, conventional methods in time/frequency domain to evaluate the correlation performance of active power filters are not provided easy solutions. So, the authors have previously proposed 3-D current coordinates which is composed into active component, fundarrental reactive component and distorted component of nonlinear loads current. This trethod has excellent perfonnance, but can not evaluate the characteristics of nonlinear load current whether It is inductive or capacitive. Therefore, To overcorre problems trentioned previously, this paper deals with the simple average power theory and the modified 3-D current coordinates for evaluating the compensation perfonnance of active power filters. To confirm the validity, active power filter simulator is developed using C-language. From the simulation, results are discussed their utility.tility.

  • PDF

Effects of Shading and Organic Matter Applications on Growth and Aromatic Constituents of Codonopsis lanceolata (차광과 유기물 시용이 더덕의 생육 및 향기성분에 미치는 영향)

  • 이승필;김상국;남명숙;최부술;이상철
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.41 no.4
    • /
    • pp.496-504
    • /
    • 1996
  • The study was conducted to obtain the basic information on increasing aromatic degrees by shading and organic matter application on Condonopsis lanceolata. The result were as followings : Fresh root wt. in shading 55 % treatment was increased about twices, whereas fresh root weight in non-shading was decreased. But growth of ground parts such as vine length, leaf width, and leaf number was promoted under non-shading treatment. Macroelements such as K, Ca, and Mg, were increased in non-shading and higher organic matter application. The components such as crude protein, fiber, and ash were increased in the shading 55% treatment compared with non-shading. In the sixteen amino acids, arginine contents were the highest in non-shading and organic matter 30M/T. Recovery yield of essential oil was 0.005% in non-shading. The highest was organic matter 30M/T in the non-shading as 0.007%. Major aromatic constituents were 11 kinds of aliphatic alcohols such as I-hexanol, cis-3-hexenol, and trans-2-hexanal. As a result, major aromatic degree was higher in shading 55%, also increased in the much organic matter application. It was considered to be applied dense shading 55% and much organic matters to produce Condonopsis lanceolata plants which have high aroma and good quality.

  • PDF

Area-Optimized Design of BICMOS Buffers (BICMOS 버퍼의 면적 최적 설계)

  • Lee, Heui-Deok;Han, Chul-Hi
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.27 no.10
    • /
    • pp.89-95
    • /
    • 1990
  • A model for bipolar-CMOS buffer design is presented which offers a guideline for determining device sizes based on speed and capacitive load. Closed-form solutions for area optimization are obtained assuming high level injection and channel velocity limitation. The solutions and circuit simulations show that the areas of BICMOS buffers are optimized by scaling the emitter length and the channel width approximately in proportion with capacitive load.

  • PDF

Station Capacity Calculation on High-Speed Railway Considering the number of Sidings and Train Halting Patterns (부본선 및 정차패턴을 고려한 고속철도 정거장 용량산정)

  • Joo, JinHyeong;Kim, KyungMin;Oh, SukMun;Lim, KwangMan;Park, OhSung
    • Journal of the Korean Society for Railway
    • /
    • v.20 no.4
    • /
    • pp.539-549
    • /
    • 2017
  • This paper proposes an analytical methodology of station capacity calculation on high - speed railway. Our method explicitly takes into account the effect of the number of sidings and the combination of train halting patterns (stop - stop, pass - stop, stop - pass, pass - pass) on the capacity of a station. To verify the reliability of our model, we conducted capacity analysis of selected stations using the Railsys simulator. We found that the difference in calculated capacity between our model and Railsys was less than 10%. After Monte Carlo simulation, our model was determined to be a good one. In addition, the consistency in capacity between our model and the train-path allocation program (Korea Rail Network Authority) was statistically significant.

Capacitive Voltage Divider for a Pulsed High-Voltage Measurement (펄스형 고전압 측정용 용량성 전압 분배기)

  • Jang, S.D.;Oh, J.S.;Son, Y.G.;Cho, M.H.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1612-1615
    • /
    • 2001
  • 포항 방사광 가속기 2.5 GeV의 전자선형 가속기는 마이크로웨이브 발생원으로써 80 MW 클라이스트론(klystron) 11대와 입사부에 65 MW 클라이스 트론 1대를 사용한다. 전자빔 에너지의 효율적인 제어를 위하여 고출력 클라이스트론의 RF 전력과 입력 빔의 전력을 정확하게 측정해야 하며 응답특성이 양호한 측정장치와 정밀한 측정이 요구된다. 클라이스트론에 공급되는 전력은 캐소드에 인가되는 전압과 전류의 측정치로 계산된다. 비록 빔 전압측정에서의 작은 오차일지라도 클라이스트론 RF 출력 전력의 결과값에 큰 영향을 미친다. 따라서, 빔 전압의 측정시에 정확한 측정을 위하여 특별한 주의가 요구된다. 고전압 펄스전원장치 인 모듈레이터 (modulator)에서 발생되는 수백 kV(350-400 kV)의 전압을 측정하기 위하여 커패시터의 용량비로 입력전압을 분압하는 용량성 분압기(capacitive voltage divider, CVD)가 사용된다. 고압측 분압용 표준 콘덴서의 정전용량을 결정하는 주요인자는 고전압 절연유의 유전율(dielectric constant)이다. 그러므로, 측정범위 내의 전압, 주파수, 온도에 대하여 정전용량의 변화율이 작도록 설계하여야 한다. 본 논문에서는 펄스형 고전압 신호 측정을 위한 용량성 전압 분배기의 측정원리, 설계분석, 교정시험, 절연유의 온도변화에 따른 정전용량 변화 특성에 대한 실험 결과를 고찰하고자 한다.

  • PDF

A Study on the Safety Security of Emergency Power for Fire Fighting (소방용 비상전원 안전성 확보에 관한 연구)

  • Lee, Won-Kang;Choi, Chung-Seog
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2012.04a
    • /
    • pp.133-136
    • /
    • 2012
  • 본 논문에서는 소방용 비상전원 안전성 확보에 관한 것으로서, 과부하 조건 회피를 위한 인터록 시스템 및 기타 방법의 한계점을 분석하여 최근 제도적으로 도입된 소방전원보존형 발전기의 필요성과 타당성을 확인하고 나아갈 방향을 제시하는데 있다. 소방부하 및 비상부하 겸용의 자가발전설비에서 어느 한쪽의 용량으로만 택일하여 설치할 경우 정전 및 화재 발생 시 발전기 용량 초과로 비상전원 공급 중단과 소화설비의 미작동의 위험이 초래된다. 소방시설에 비상전원의 안전한 공급을 목적으로 하는 소방전원보존형 발전기는 과부하에 도달되면 소방전원보존용 컨트롤러에서 신호를 발신하여 소방부하는 남겨두고 비상부하의 일부 또는 전부를 차단하고, 소방부하에 비상전원이 연속적으로 공급하고 그 작동 상태가 표시되는 표시장치를 특징을 가진 시스템이다. 소방 안전을 확보하는 제도는 안전을 위한 행정적인 절차와 기준을 지킴으로써 기술적인 안전성이 보장되도록 하는 방식으로 운용되고 있다. 이에는 확인 절차가 필수적으로 요구되는 것이다. 임의의 구두 진술로나 이와 다름없는 임의적인 서류로만 인정할 수는 없는 것이며, 그럴 경우 제도에 의한 소방 안전 확보의 보장성이 무너지기 때문이다.

  • PDF