• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.319-325
• /
• 2022

Triticale forage has the highest yield of all winter forage crops, including rye, and a cold tolerance within an average low temperature of -10℃ in January. Therefore, this study analyzed the effects of sowing and harvesting times on the feed value and functional components of triticale to optimize the use and supply of triticale as livestock fee Room temperature' can vary widely with climate, season, and time of day. In order to clearly state the conditions of the study in a manner that facilitates replication by other researchers, please consider using an approximate temperature range instead. Seeds of the triticale 'Joseong' were sown during the fall of 2021 (October 20th) and spring of 2022 (March 7th). The triticale was harvested at the following growth stages: seedling stage, booting stage, heading stage, 10 days after heading, and 20 days after heading. The moisture content of each harvested triticale was adjusted to approximately 60%, and the triticale was fermented for silage for 40 days at ambient temperature under anaerobic conditions. We measured the pH and organic acid content of each silage to determine the feed value and functional component. The lactic acid content of the triticale silage harvested at the seedling stage sown in both fall and spring (1.61%, 1.63%) was the highest among all the silages. The octacosanol content in the silages of both fall-sown and spring-sown triticale harvested at the seedling stage (0.38, 0.27 mg/ml) was the highest. Overall, the results revealed that harvesting time had a greater impact on the feed value and functional components of triticale silage than sowing time.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.1
• /
• pp.35-52
• /
• 2023

This study investigated the utilization and satisfaction of lunchboxes according to food-related lifestyle. A sample of 819 adults who regularly purchased lunchboxes were studied. This study can provide basic data for effective menu development. The participants of the study were classified into 4 groups: a 'taste-seeking group', an 'economy-seeking group', 'a convenience-seeking group', and a 'health-seeking group'. The purchase price of lunchboxes was in the range of 3,500 to 4,000 won. The 'health-seeking group' was shown to spend the highest amount on lunchboxes, over 5,100 won. Information about lunchboxes was obtained primarily through convenience stores followed by Internet SNS (p<0.05). Most participants considered nutritional value when purchasing a lunchbox (p<0.001), of which protein, caloric, and sodium content were perceived as important. Moreover, lunchboxes with clean and hygienic aesthetics were preferred amongst the 'health-seeking group' (p<0.01). The 'economy-seeking group' had a higher satisfaction linked with taste (3.66) and quantity (3.60, p<0.001). Furthermore, in terms of the satisfaction with a menu variety the 'health-seeking group' showed the highest satisfaction with a score of 3.76, while the 'convenience-seeking group' ranked the lowest satisfaction with a score of 3.46 (p<0.05). All groups were satisfied with the convenience for purchasing lunchbox (p<0.001). Additionally, most participants preferred white rice (p<0.001) and meat (p<0.01) with cooked by fried and grilled. Lastly, in the content of the lunchbox use in the future, most participants indicated the intent for continuous use (p<0.01) and recommendation to others with the reason for the low price (19.2%) in the 'economy-seeking group', fresh ingredients (16.2%) in the 'convenience-seeking group', and nutritive (17.3%) in the 'health-seeking group', as well as for the convenience of purchase in the overall groups. Taken together, 'taste' and 'convenience' were the most important factors for all groups, while 'nutrition of food' and 'addition of condiments' scored relatively low on the satisfaction in all groups. Therefore, we recommend for the growth of the convenience store lunchbox market, that it is necessary to improve the quality of the lunchbox by developing various menus based on lifestyle group and fortifying nutrition.

• Korean journal of applied entomology
• /
• v.24 no.3 s.64
• /
• pp.123-127
• /
• 1985

Incidence of the Fusarium wilt caused by F. oxysporum f. sp. vasinfectum of sesame (var. Kwangsan) was remarkably influenced by seeding date and mean air temperature in the field of two or three year's continuous cropping with sesame in 1983 and 1985. Sesame were seeded on six different dates from April 20 to July 5. Air temperature was checked daily at the meteorological station near the experimental field. Low($16{\sim}20^{\circ}C$) and high temperature($20{\sim}25^{\circ}C$) periods were provisionally devided, based on every ten-day mean daily temperature during field experiment for last ten years, which corresponded to before and after June 15 in Jinju, Gyeong-nam. Infection rates were 83.7%, 68.2% and 59.4% in the plants grown for 55 days (seeding date: April 20), 40 days(May 5) and 25 days(May 20) under low temperature. On the other hand, infection rates were below 3% in those plots seeded during high temperature period. The longer the growth period exposed to low temperature, the higher was infection rates. It is interesting to note that 40 days old seedling or older are prone to severe infection compared to the younger ones, in higher temperature of $20{\sim}25^{\circ}C$. Therefore, seedlings in vegetative growth stage are less prone to infection than these in reproductive growth stage. The result showed that air temperature during sesame growth was one of the most important factor affecting the incidence of Fusarium wilt. This suggested that sesame crop, which is of tropical origin, has been predisposed to Fusarium wilt, when the plants were exposed to low temperature of $16{\sim}20^{\circ}C$.

• Journal of Mushroom
• /
• v.21 no.1
• /
• pp.22-32
• /
• 2023

To investigate the effect of thinning intensity on environmental factors and ectomycorrhizal mushroom fruiting in forest ecosystems, we studied canopy closure, throughfall, soil temperature, soil moisture, light response of understory vegetation, and ectomycorrhizal mushroom fruiting in a 10-year-old pine forest after 34%, 45%, and 60% thinning. Canopy closure was significantly higher in the 34% treatment and control plots, ranging from 80-85% in April. However, in November, all thinning treatment plots showed a decrease of approximately 5-10% compared with the control plot. The 60% treatment plot had over 200 mm of additional throughfall compared with the control plot, and monthly throughfall was significantly higher by more than 100 mm in October. The soil temperature in each treatment plot increased significantly by up to 1℃ or more compared with the control plot as the thinning rate increased. The soil moisture increased by more than 5% in the thinning treatment plots during rainfall, particularly in the 34% treatment plot, where the rate of moisture decrease was slower. The photosynthetic rate of major tree species (excluding Pinus densiflora)was highest in Quercus mongolica, with a rate of 7 µmolCO₂·m^-2·s^-1. At a lightintensity of 800 μmol·m^-2·s^-1, Q. mongolica showed the highest photosynthetic level of 6 ± 0.3 μmolCO₂·m^-2·s^-1 in the 45% treatment. The photosynthetic rate of Fraxinus sieboldiana and Styrax japonicus increased as the thinning intensity increased. The Shannon-Wiener index of mycorrhizal mushrooms did not significantly differ among treatments, but the fresh weight of mushrooms was approximately 360-840 g higher in the 34% and 45% treatments than in the control. Additionally, the fresh weight of fungi in the 60% treatment was 860 g less than that in the control. There were more individuals of Amanita citrina in the control than in the thinning treatment, while Suillus bovinus numbers increased by more than 10 times in the 34% thinning treatment compared with the control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.101-112
• /
• 2023

Purpose. This retrospective study was to investigate the survival and complication rates of posterior single implant according to the implant diameters, lengths and position. Materials and methods. Patients who had been restored single implant prosthesis in the posterior area by the three prosthodontists in the department of prosthodontics, Daejeon dental hospital of Wonkwang university, in the period from February 2014 to May 2018 were selected for the study. A total of 505 patients with 697 implants were observed. The survival and complications of implants were investigated using electronic medical records and radiographs. Fixture diameters, lengths, position, patient's sex and age were assessed as possible factor affecting the survival and complications of implants. Results. 3-year cumulative survival rates of posterior single implants were 98.5% and 5-year cumulative survival rates were 94.4%. 5-year cumulative survival rates were higher in implants with diameter > 4.0 mm (97.0%) than implants with diameter ≤ 4.0 mm (89.5%), and in females (98.8%) than males (92.4%). There were statistically significant differences (P < .05). The mechanical complication rate was 20.1% and the biological complication rate was 4.7%. Complications occurred in order of abutment screw loosening (7.5%), decementation (6.3%), proximal contact loss (3.7%) and so on. Abutment screw loosening occurred more frequently in the lower molar region (10.5%), in males (9.5%) than females (5.1%), and in patients aged < 65 years (9.4%) than patients aged ≥ 65 years (5.1%). There were statistically significant differences (P < .05). Conclusion. The 5-year cumulative survival rates were higher in implants with diameter > 4.0 mm than implants with diameter ≤ 4.0 mm and in females than males. Abutment screw loosening which was the most commonly occurring complication occurred more frequently in the lower molar region, in males than females, and in patients aged < 65 years than patients aged ≥ 65 years. There were statistically significant differences.

• Korean Journal of Ecology and Environment
• /
• v.55 no.1
• /
• pp.35-48
• /
• 2022

Fish assemblage of total 325 of Korean peninsula estuaries were surveyed to analyze the characteristics of community structure and diversity by sea areas for three years from 2016 to 2018. The scale (stream width) of Korean estuaries were various (14~3,356 m), and 68.9% of all estuaries showed salinity of less than 2 psu. Total 149 species classified into 52 families of fish were identified, and the dominant and sub-dominant species were Tribolodon hakonensis (relative abundance, RA, 12.5%) and Mugil cephalus (RA, 9.5%), respectively. The estuary of the Korean Peninsula had different physical and chemical habitat environments depending on the sea area, and accordingly, fish community structure also showed statistically significant differences (PERMANOVA, Pseudo-F=26.69, P=0.001). In addition, the NMDS (nonmetric multidimensional scaling) results showed the patterns that indicating fish community difference by sea areas, even though low community similarity within sea area (SIMPER, 21.79~26.39%). The estuaries of east sea areas were distinguished from the others in the aspects of which, the higher importance of migratory fishes and endangered species, and that of brackish species were characterized at south sea estuaries. However, the estuaries of west sea showed higher importance of species that have a relation with freshwater (primary freshwater species, exotic species), which is the result that associating with the lower salinity of west sea estuaries because of the high ratio of closed estuaries(78.2%). The SIMPER analysis, scoring the contribution rates of species to community similarity, also showed results corresponding to the tendency of different fish community structures according to each sea area. So far, In Korea, most studies on fish communities in estuaries have been conducted in a single estuary unit, which made it difficult to understand the characteristics of estuaries at the national level, which are prerequisite for policy establishment. In present study, we are providing fish community structure characteristics of Korean estuaries in a national scale, including diversity index, habitat salinity ranges of major species, distribution of migratory species. We are expecting that our results could be utilized as baseline information for establishing management policies or further study of Korean estuaries.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.336-342
• /
• 2019

Purpose: To examine the relationship between the progression of a kyphotic deformity and the magnetic resonance imaging (MRI) findings in conservatively treated osteoporotic thoracolumbar compression fracture patients. Materials and Methods: This study categorized the patients who underwent conservative treatment among those patients who underwent treatment under the suspicion of a thoracolumbar compression fracture from January 2007 to March 2016. Among them, this retrospective study included eighty-nine patients with osteoporosis and osteopenia with a bone density of less than -2.0 and single vertebral body fracture. This study examined the MRI of anterior longitudinal ligament or posterior longitudinal ligament injury, superior or inferior endplate disruption, superior of inferior intravertebral disc injury, the presence of low signal intensity on T2-weighted images, and bone edema of intravertebral bodies in fractured intravertebral bodies. Results: In cases where the superior endplate was disrupted or the level of bone edema of the intravertebral bodies was high, the kyphotic angle, wedge angle, and anterior vertebral compression showed remarkably progression. In the case of damage to the anterior longitudinal ligament or the superior disc, only the kyphotic angle was markedly prominent. On the T2-weighted images, low signal intensity lesions showed a high wedge angle and high anterior vertebral compression. On the other hand, there were no significant correlations among the posterior longitudinal ligament injury, inferior endplate disruption, inferior disc injury, and the progression of kyphotic deformity and vertebral compression. The risk factors that increase the kyphotic angle by more than 5° include the presence of injuries to the anterior longitudinal ligament, superior endplate disruption, and superior disc injury, and the risk factors were 21.3, 5.1, and 8.5 times higher than those of the uninjured case, and the risk differed according to the level of bone edema. Conclusion: An osteoporotic thoracolumbar compression fracture in osteoporotic or osteopenic patients, anterior longitudinal ligament injury, superior endplate and intravertebral disc injury, and high level of edema in the MRI were critical factors that increases the risk of kyphotic deformity.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.325-351
• /
• 2016

This study empirically investigated the relationship among knowledge transfer, network(firm network and government network) and performance Korean MNCs' subsidiaries in terms of absorptive capacity and entry mode roles in China. For this, absorptive capacity was established as an independent variable, mediating variable, and moderating variable. And the entry mode was divided into single investment and joint venture and set to the moderating variable. Data for the analysis of actual proof was randomly selected from the companies which was established more than 3 years before KOTRA 'The overseas expansion Korean company directory (2014)'. Questionnaires to 138 Chinese subsidiaries of Korean MNCs were collected by FAX and E-mail. AMOS was utilized and collected data investigated the role of the absorption capacity and entry mode as the covariance structure analysis. The empirical analysis showed that absorption capacity has a direct influence on management performance as an independent variable with the network (firm network and government network). It only has a partial mediating role between enterprise networks and management performance, and no meaningful result was gained as its moderationg role bewteen the exogenous variable and management performance. And in terms of Korean companies' moderating role in entering China, they have a moderating role between government network, absorption capacity and management performance, but did not show a statistically significant result between knowledge transfer, enterprise network and management performance. Absorption capacity, as the variable affecting overseas subsidiary's management performance, should not be considered a mediating or moderating variable, but an independent variable. Since the joint venture is showing higher performance than single investment when going into the Chinese market, implication is provided for options in overseas expansion. But this research has the limitation in generalization because it is aiming at the subsidiaries of the Korean company investing in China. Therefore, it is more desirable in the future to conduct a study of the subsidiary of the Korean company entering several countries. It also has limitations in generalization, because the research was conducted using a limited number of variables, despite there are various factors affecting the management performance of Chinese subsidiaries.

• Journal of Naturopathy
• /
• v.8 no.1
• /
• pp.29-39
• /
• 2019

Purposes: The purpose of this study was to investigate the satisfaction of each activity in the high school students (568 students) after school career education (Career and vocation, Curriculum-related career education, Special lecture related to career, Entrance exam session, Career psychology test, Internet lecture), and then to analyze the career decision-making self-efficacy of the items Goal selection, Job information, Problem solving and Future plan by high, middle, and low group. Methods: Questionnaires administered to subjects after career education counseling education. Results: Career decision - making self - efficacy was significantly higher in the high group than in the middle and low groups in the goal selection, job information, problem-solving and future planning by the educational satisfaction on career and vocation, curriculum-related lectures, entrance examination session (p<.001). The level of satisfaction of special career lectures was in the order of low group> high group> middle group in career decision self - efficacy, and the values of high and low groups were significantly higher than those of the middle group. The effect of satisfaction on career decision self - efficiency in Career psychological examination education was in the order of top> middle> low groups in goal choice and job information, and the high group values were significantly higher than the middle and low groups. In the problem solving and future planning, there was a difference between high, middle, and low group values, but there was no significant difference. The effect of the satisfaction of the internet course on the career decision self - efficacy was not significant, but there was a difference between the high, middle, and low groups. Satisfaction with the internet course was low and did not affect the decision - making self - efficacy significantly. Conclusion: The higher the satisfaction of career education, the higher self - determination efficacy of goal selection, job information, problem solving and future plan. This study suggests the direction of career education.