• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.235-238
• /
• 2011

본 연구에서는 필요한 수준의 성과품 납품을 위해 교량정보모델의 상세수준을 분류하고 각 상세수준에서 요구되는 세부정보를 분석하였다. 이는 기본적으로 교량 설계 업무가 단계별로 이루어지며 각 단계마다 성과품을 납품하도록 규정 되어있다는 사실을 바탕으로 연구가 이루어졌다. 이를 위하여 본 연구에서는 우선, 국내의 교량 설계준공단계 성과품 납품 항목 중 교량정보모델에 요구되는 항목을 분류하였으며 분류한 요구항목에 맞춰 3D객체와 속성정보수준을 정하여 업무 프로세스 단계별 상세수준을 정의하였다. 또한, 정의한 상세수준을 기준으로 하여 각 상세수준에서 포함하도록 요구되는 세부정보 분석을 수행하였으며, 분석된 세부요구정보는 성과품 납품에 활용가능하다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.357-360
• /
• 2000

본 논문은 철의장품(steel outfit) 조선기자재를 생산하는 업체들의 품질경영실태를 분석하여 한국의 철의장품 조선기자재 생산업체의 특성에 맞는 효과적이고 효율적인 품질경영시스템을 개발하고자 한다. 조사 대상업체는 ISO 9000 품질인증을 획득한 부산 경남 인근의 7개 업체로서 최근 99년까지 지난 3년간 실시한 본 심사와 예비심사에 나타난 심사자료를 근거로 분석하였다. 종업원수와 사급여부에 따라 7개 업체를 2개의 그룹으로 나누고 ISO 9000 품질인증의 요구항목별 지적사항의 수에 따른 파레토챠트를 작성하였다. 철의장품 조선기자재 생산업체의 품질경영시스템의 관리에서 ISO 9000 품질인증의 어느 요구항목이 가장 중요한 중점관리항목들인가를 찾아보고 SAS를 이용하여 중요 요구항목들과 업체들의 통계적 관련성을 살펴보았다. 한국 조선업의 세계적인 수주량 선점에도 불구하고 철의장품 조선기자재 산업체들의 수주조건 악화에 따른 단가의 하락으로 점차 열악해져 가는 조선기자재산업의 현실에 적합한 품질경영시스템을 개발하기 위해서 ISO 9001 요구항목에는 포함되지 않지만 조선기자재산업의 품질경영시스템의 특성상 반드시 포함되어야 할 중요한 추가 요구사항들의 구체적인 사례들을 제시하였다. 마지막으로 중요 요구항목별 심사자료 유형별 그룹별 통계적 관련성을 3원 분할표를 이용하여 설명하였다.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.519-526
• /
• 2014

The purpose of this study was investigate nursing needs of heart disease patients depending on whether or not readmitted. Who had diagnosed heart disease and admitted on a general hospital was collected as a self-administered questionnaire method from March to June 2012. Collected data were analyzed through the SPSS 18.0 program. The average of total nursing needs is $4.12{\pm}.49$ point in patient who were not in readmission, and $3.89{\pm}.63$ point in patient joined readmission, there were significant differenced(p=.046). Therapeutic nursing needs are higher than others in nursing needs, in the both groups. Each rank and sub-regions is also different nursing needs according to readmission in two group. Physical, Social-emotional, educational and therapeutic nursing needs was correlated each other in depth. Therefore, focusing on patient's nursing needs according to patient's characteristics are required to perform nursing.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.67-78
• /
• 1994

1996년부터 유럽연합을 중심으로 전자파내성(Electromagnetic immunity; 흔히 군사규격에서는 전자파감응성(electromagnetic susceptibility)이라 함) 규제가 본격적으로 시작될 전망이다. 이러한 전자 파내성 규제는 우리가 과거 '80년대 초에 경험했던 전자파방출(electromagnetic emission; 흔히 electro- magnetic interference 라고도 표현한다) 규제에 비해 규제주파수가 대폭 확장됨(9KHz - 1GHz .rarw. 50/60 Hz - 40 GHz)은 물론, 규제항목도 크게 늘어나기(2개 항목 .rarw. 11개 항목)때문에 본격 규제가 시작되면 우리 산업체에 큰 피해를 초래할 것으로 우려된다. 특히 "복사 전자기장에 대한 전자파내성 요구사항"은 일부 전자파내성 측정항목을 포함하고 있던 안전규 격 등에서도 다루고 있지 않던 것으로서 우리에게는 매우 생소한 항목이다. 이 항목은 과거 미국의 군사 규격등에서 요구했던 항목인데, 앞으로 각국의 상용규격에도 대폭 추가될 것으로 보인다. 이러한 규제는 우리의 생활환경에서 결코 빼놓고 생각할 수 없는, 동시에 가장 큰 전자파장해원인 의도적 복사로서의 방 송신호 및 각종 무선통신 신호에 대해 전기, 전자기기가 전자파내성을 갖고, 성능저하나 오동작을 유발하 지 않아야 함을 요구하는 것이다. 이러한 항목의 평가를 위해서는 대형 시험환경(EMS chamber)과 표준 전자기장 발생장치(signal genera- tors + high power amplifiers), 그리고 오동작 모니터링 장치(monitorring equipments) 등이 필요하기 때 문에 평가시스템 구성에 막대한 비용이 소요된다. 따라서 시스템 구성에 매우 신중을 기해야 하며, 관련 국제표준화규격을 사전에 철저히 이해하여 관련 시험검사를 위한 투자계획을 수립하는 것이 바람직하다. 본 고에서는 복사 전자기장에 대한 대표적인 국제표준화규격을 소개하고, 나아가서 그러한 항목의 평가 시스템의 설계 및 구현에 대해서 설명할 것이다.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.95-114
• /
• 2009

The aim of this paper is to evaluate weight and priority values for 'inner consisted factors' and 'outer requested factors' of logistics system using the AHP(Analytic Hierarchicy Process) method. As for analysis regarding inner consisted factors, the results were shown as follows: a road transportation (0.312) as first rank; a marine transportation (0.269) as second rank; a railway transportation (0.239) as third rank; an air transportation (0.118) as fourth rank, and a pipeline transportation (0.063) as fifth rank. In terms of analysis regarding outer requested factors, the results were came out as follows: an infrastructure (0.322) as first rank; a performance (0.206) as second rank; an information system (0.151) as third rank; a human resources (0.121) as fourth rank, a business environment (0.075) as fifth rank; a connectivity (0.073) as sixth rank, and a political environment (0.052) as seventh rank.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.81-88
• /
• 2006

User's requirements are rapidly diversed by economic and social changes. Architect, however, doesn't well reflect user's required performance on the drawings in practical business, so that it causes many change orders. For this reason, this paper identified user's requirements through extensive literature review and convert users' requirements into the performance items in order to measure the weight through the survey from users and experts. The purpose of this paper is to provide a guidance for design through the comparing and analyzing the user's weight and expert's weight.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.1-9
• /
• 2023

Currently, as the demand for stops in the urban increases resulting from an increase in the supply of express trains, the development of trains capable of operating both high-floor platforms in the urban and low-floor platforms in the suburbs is required. In this paper, we studied the design and fabrication of a controller for train doors that consists of low and high steps as a plug-in type door mechanism and thus can be used on low and high platforms. This DCU H/W was designed and implemented using 32 bit MCU to control 4 motors, 33 digital inputs and 16 digital outputs. In addition, based on the software life cycle of EN50128, 2 items of operation requirements and 12 items of control requirements were derived, and then they were designed and implemented as operation SW. The implemented SW was tested for each requirement. As a result, we performed tests on 13 items that could be tested in the mock-up out of 14 total requirement items and showed that the requirements were satisfied.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.273-288
• /
• 2011

Recently, the rankings of Korean container ports in terms of container handling cargo volume were plunged down due to the emerging Chinese ports. The efficient container ports strategies which increase container port competitiveness were requested. In this respect, it is urgently required to draw out constituent factors for Port Logistics, weigh these factors, and finally focus on improving the suggested factors. The aim of this paper is to evaluate weight and priority values for 'inner consisted factors' and 'outer requested factors' of port logistics by using the AHP(Analytic Hierarchy Process) method. As for the analysis regarding the inner consisted factors, the results were shown as follows: a storage and handling system (0.288) as the first rank; an information system of port logistics (0.210) as the second rank; an inland intermodal system (0.189) as the third rank; a ship's entering and departuring system (0.184) as the fourth rank, and a ship's berthing system (0.129) as the fifth rank. In terms of analysis regarding outer requested factors, the results came out as follows: a logistics cost (0.360) as the first rank; a port service (0.128) as the second rank; a connectivity (0.118) as the third rank; a hinterland condition (0.116) as the fourth rank; an convenience (0.106) as the fifth rank; a regional center (0.095) as the sixth rank, and an availability (0.077) as the seventh rank. For analyzing the priorities changes in constituent factors, the comparison of results between the year 2007 and the year 2011 was done. As the results, among inner consisted factors, 'information system of port logistics' was ranked first in the year 2007 while 'a storage and handling system' became the most important factor in the year 2011. Among the inner consisted factors, however, the logistics cost was the important factor in 2007 and 2011, respectively.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2021

Requirements engineering can be seen as proceeding with various processes and activities such as extraction, analysis, specification, management, and verification without temporal and spatial constraints in the development environment of information systems that are becoming large and decentralized. Developing requirements well and conducting continuous evaluation and management is the shortcut to success in project management, and it is recognized as a very important matter in relation to requirements in the information system audit. When we conduct information system audit and conducting projects subject to audit, we need to improve the required engineering aspect. Therefore, this study derives inspection items suitable for the target project by referring to the audit inspection manual and audit inspection guide when conducting the current audit, and relates to the required engineering aspect among the contents of the inspection guide for each business type that is the basis for deriving the inspection items were derived for each audit point/audit area for the project management and quality assurance project type corresponding to the inspection items. The suitability of the extracted occupation items was verified through a questionnaire survey by experts.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.775-780
• /
• 2001

정보통신 기술 발전과 함께 새로운 교육 패러다임에 대한 요구는 e-learning 이라는 학습 시스템을 출현케 하였다. 이는 사용자의 요구 및 학습 내용에 따라 매우 다양한 형태로 설계가능하나 사용자 사용성 평가를 늪이기 위해서는 웹기반 시스템 사용성 평가와 교육시스템 평가 항목을 조정하여 새로운 평가분석 항목의 도출이 요구되어진다. 본 연구에서는 웹 기반 e-learning 시스템분석 모형을 위해 기존의 교육 시스템 분석 항목들을 조정하여 학습자 분석, 기술분석, 학습 수행 분석, 응용 분석 학습자로 분석 등을 요소로 하는 새로운 분석 모형 제시하였다. 또한 이를 적응하여 사용자 사용성 평가를 할 수 있는 관계를 설정하여 활용하는 방법을 제시하였다. 이와 같은 방법은 효율적인 e-learning 시스템 분석이 가능하도록 한다. 이때 설정되어지는 관계는 절대적 포함관계 상대적 포함 관계, 단일주제를 가진 상대적 포함관계 등이다.