• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.207-216
• /
• 2014

The energy loss can be divided into the loss caused by heat transfer and the loss caused by air flow. Heat transfer is the loss resulting from the heat transmittance of external wall, roof, and floor, and represents one of the most vulnerable elements of existing buildings. To prevent such loss, it is necessary to increase the mean heat transmittance of entire external wall, including the window, to a level above the standard regional value and ensure the air-tightness of window. The old buildings have the structure which is prone to the loss of greater air flow due to the air infiltration through the exit/entrance door upward along the stairway by the stack effect and simultaneous suction of air from each floor, and becomes even vulnerable to the loss of heat insulation for each floor, although the external wall and windows are the most vulnerable parts. The improvement plans for each floor need to be submitted in tandem with the diagnosis of whole building, regarding the diagnosis plan and energy improvement measures based on the survey of site, rather than adhering to the misconception that the replacement of window alone will result in energy-savings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2020

In this study, the possibility of seismic performance design was proposed and the quality verification test method was reviewed as part of the design of waterproof performance in underground walls under accelerated environment conditions for waterproofing materials, which are barrier and finishing material that can prevent ingress or overflowing water from inside and outside of a building by attaching all of the construction materials used in construction structures. Considering the current state of earthquake-resistant design of construction materials in Korea and abroad, seismic product groups are rare and mostly dependent on construction methods because there are no regulations on materials, although there are still regulations on earthquake-resistant design in the building process under the current law. Overseas, it was possible to confirm that various building materials that gave seismic performance to non-structural materials, such as Japan, Canada, and Germany, are being developed. If it is possible to have a complementary response to earthquakes in the advanced external waterproofing materials, it can be expected to be applicable as leak prevention and prevention technology along with the seismic designed structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.56-68
• /
• 2019

Safety-conscious design on site is required for site constructions because of the introduction of the design for safety, but it still leaves much to be desired. This study compared the site where the design was applied and the site where it was not applied. The applied case examined the underground wall construction during frame construction, which corresponds to the skeleton of the building construction. The underground wall construction is quite risky due to the exposure to exterior environments and involvement of various stages, such as scaffolding, formwork, reinforcing work, and concrete casting work. Therefore, the risk factors for each stage were identified and a risk assessment was carried out to select an alternative method to reduce the risk. The risk factors of the selected alternative construction method were also identified and a risk assessment was conducted. The risk assessment weight was calculated by comparing the site where the construction method was applied and the site where it was not, explaining the necessity of the design for safety in reducing the risk. In addition, an actual case where an alternative construction method was used was studied to highlight the necessity for a design for safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.363-373
• /
• 2018

In today's diversified society, it is hard to know which building style represents the architectural style of the time. The simplicity found in monolithic-style buildings forms a symmetrical point with fairly complex structure, and its value can be acknowledged. This study analyzes buildings made of insulating lightweight aggregate concrete in the early 21st century, defines the concept of monolithic expression, and examines how these characteristics are expressed in the space, forms, and structural methods in construction. Unlike a multi-layered exterior wall system, which features multiple layers composed of a variety of materials, the exterior walls built with insulating lightweight aggregate concrete comes in a lump form with a mold form that is tightly filled with concrete as a single material and is monolithic. This is attributed to the creation of spaces characterized by the homogeneity of inner and outer spaces with the use of the same material, continuity of the surface as solidity, spatial characteristics of the stereotomic construction, expression of materiality with the use of exposed concrete, and the contrast of the lump and the space. This not only reveals formal characteristics that expose a discourse about monolithic architecture in contemporary architecture but also provide an opportunity to extend the range of discussion to structures and materials and even to their effects on space.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.347-348
• /
• 2004

차세대관리 종합공정 실증시설의 핫셀 차폐벽은 중량콘크리트 재질로서 외벽의 두께는 90cm 이상으로 설계되었으며, 차폐벽의 모든 부위는 이와 동일한 차폐능을 확보하도록 하여야 한다. 그러나 핫셀 운영을 위하여 불가피하게 설치되는 여러 가지 부속 시설물들에 의하여 원래 계획한 핫셀 차폐벽의 차폐능 저하를 가져오게 되며, 이런 부속 시설물로는 차폐 출입문, 방사성 물질을 핫셀 내부로 반입하거나 반출하기 위한 수송용기 접합부, 소형물 투입구, 슬리브 및 매설관등이 있다.(중략)

• Magazine of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.21-26
• /
• 2002

구의 아크로리버 현장은 서울의 동쪽에 위치한 지하 5층, 지상 37층과 지상 22/26/29층 2개 동의 업무/판매시설 및 공동주택을 신축하는 주상복합형 프로젝트로서 주변에 강변시외버스터미널과 테크노마트가 바로 인접하여 평소 유동인구가 매우 많은 곳에 위치해 있다. (그림 1)은 구의 아크로리버의 조감도이며, 공사개요는 (표 1)과 같다.(중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.103-109
• /
• 1983

본 논문은 저온용 원통형 저장 탱크를 2층으로 된 적층형 복합재료로 가정하여 각 층의 온도분포 를 해석하였다. 이 중공 원통의 외벽에서는 원주방향으로 임의의 열유속을 받고, 주위 온도는 주 기적으로 변하며 내외벽에서는 대류가 일어나고, 탱크벽의 초기온도 분포는 임의의 함수라는 가 정하에 Fourier cosine 변환과 Green 함수를 도입하여 해석하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.111-116
• /
• 2002

고온의 소듐을 냉각재로 사용하는 풀형 액체금속로인KALIMER[1]는 기존의 경수로에 비해 고온에서 운전되므로, 잔열제거계통은 공기 자연순환에 의해 격납용기(CV) 외벽을 직접 냉각하는 방식의 PSDRS(Passive Safety-grade Decay Heat Removal System)[1]를 사용하며, 특히 고온의 구조물 표면온도에 의해 대류전열 외에도 복사전열과정이 활발히 일어난다.(중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.263-268
• /
• 2000

원자력 압력용기의 건전성 평가 및 안전성 확보에 대한 관심은 1978년 미국 Rancho Seco 발전소에서 발생한 가압열충격 사고로 인해 크게 부각되기 시작하였다. 가압열충격(Pressurized Thermal Shock： PTS)이란 계통의 압력이 높은 상태이거나 증가중인 상태에서 급속한 냉각과 과도한 냉각이 발생하는 것을 의미한다. 이러한 냉각에 의해 원자로용기 외벽보다 내벽이 빨리 냉각되어 상당한 온도구배가 발생하고 이 온도구배에 따라 용기 내벽에 최대인장 열응력이 발생한다.(중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.