• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.89-94
• /
• 2001

The position control accuracy of a robot manipulator is significantly deteriorated when a long arm robot is operated at a high speed. This paper presents a very simple sliding mode control which eliminates multiple mode residual vibration in a robot manipulator. The neural network is used to avoid that sliding mode condition is deviated due to the change of system parameter and disturbance. This paper is suggested control system which designed by sliding mode controller using neural network. The effectiveness of proposed scheme is demonstrated through computer simulation.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.146-148
• /
• 2005

3상 PWM 컨버터는 전원전압과 동일한 위상의 전류를 인가할 수 있도록 스위칭 소자를 사용하여 고효율, 고역률을 얻을 수 있으며, 계통전원의 안정화와 유도장애 해소 등의 장점을 가지고 있다. 그러나 PWM 컨버터는 전원전압과 동상의 입력전류를 얻기 위해서는 전원전압센서와 전류센서를 필요로 하고 DC 링크단을 제어하기 위해서도 부가적인 하드웨어 구성이 필요하다. 이러한 센서들은 고가이며 신호의 검출시 각종 노이즈와 외란의 영향으로 신뢰성의 저하가 우려되므로 센서의 제거가 요구되고 있다. 본 논문은 상태관측기를 이용하여 전원전압과 위상각을 추정하는 센서리스 제어를 제안하였으며 3상 PFC 컨버터를 구성하여 시뮬레이션과 실험을 수행한 결과 전원전압 추정과 단위역률이 잘 이루어짐을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.448-454
• /
• 2007

The new tuning rules of the PID controller for the rejection of load disturbance are proposed incorporating with real-coded genetic algorithms (RCGAs). The optimal gain parameters of the PID controller for a first-order plus time delay model are obtained based on a RCGA. Then tuning formula are derived using the tuned parameters sets potential tuning rule models and another RCGA. The performance criteria of the controller are adopted as ISE, IAE and ITAE. A series of simulation are carried out to verify the effectiveness of the proposed tuning rules.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.230.1-230.1
• /
• 2012

본 논문에서는 대구경 광학탑재체의 조립, 정렬 및 시험에 사용되는 고정밀, 고안정 짐발장치의 개발에 대해서 소개하고자 한다. 광학탑재체의 광학시험을 위해 사용되는 짐발장치는 광축높이를 유지하기 위해서 높이조절이 가능해야하고, 조립과정과 광학시험과정 그리고 시험 후 광학탑재체를 짐발 장치로부터 분리하기 위해 수평상태와 수직상태로의 회전이 가능해야 한다. 광학측정 시험과정 중에 결상위치의 미세한 조절을 위해 광학탑재체를 수평상태에서 상하좌우 정밀한 회전이 가능해야한다. 우주궤도환경 하에서 성능측정을 위해 열진공체임버 안에서의 광학시험이 필요하므로 짐발장치를 구성하는 재질은 모두 진공사용이 적합한 것이어야 한다. 광학측정 중에 측정설비주변에서부터 인가된 외란은 광학시험과 같은 민감한 시험에서는 철저하게 제거되어야 하는데, 이와 관련하여 짐발장치의 광학측정시험형상에서의 고유진동수와 같은 동적 특성도 설계과정에 반영하여 안정적인 측정 장치가 되도록 고려되어야 한다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.247-255
• /
• 1989

This paper proposes an error model with integral action and a pole-place-ment self-tuning controller for robot manipulators in task coordinates. The controller can reject the offset due to any load disturbance without a detailed description of the robot dynamics. The error model parameters are estimated by the recursive least square identification algorithms, and controller parameters are determined by the pole-placement method. A computer simulation study has been conducted to demonstrate the performance of the proposed control system in task coordinates for a 3-joint and 2-link spatial robot manipulator with payload.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.167-172
• /
• 2007

The recently-developed off-line learning control approaches for the rejection of periodic disturbances utilize the specific property that the learning system tends to oscillate in steady state. Unfortunately, the prior works have not clarified how closely the learning system should approach the steady state to achieve the rejection of periodic disturbances to satisfactory level. In this paper, we address this issue extensively for the class of linear systems. We also attempt to remove the effect of other aperiodic disturbances on the rejection of the periodic disturbances effectively. In fact, the proposed learning control algorithm can provide very fast convergence performance in the presence of aperiodic disturbance. The effectiveness and practicality of our work is demonstrated through mathematical performance analysis as well as various simulation results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.443-448
• /
• 2000

In this paper, we propose a novel adaptive feedforward controller for periodic disturbance and noise cancellation, with a frequency tracking capability. It can be added to an existing feedback control system without altering the original closed-loop characteristics, which is based on adaptive algorithm. We introduce novel algorithm "Constrained AFC(adaptive feedforward controller) algorithm" that increase the convergence region regardless of the delay in the closed loop system. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the coefficients become time invariant. The proposed algorithm not only estimate the magnitude and phase of the tonal disturbance and noise but also track the frequency of the tone, which changes in quasi-static manner. The frequency tracking algorithm uses the instantaneous frequency approach based on Hilbert transform. A number of computer simulations have been carried out in order to demonstrate the effectiveness of proposed method under various conditions.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.87-100
• /
• 2005

In this paper, a design of an integral augmented optimal variable structure system(IOVSS) is presented for the prescribed output control of uncertain SISO systems under persistent disturbances. This algorithm aims at removing the problems of the reaching phase by incorporating advanced optimal control theory. By means of an integral sliding surface, the reaching phase is completely removed, and the integral sliding surface can be defined from a given initial state to origin without any reaching phase. The ideal sliding dynamics of the integral sliding surface is obtained in the form of the state equation and is designed in an optimal sense by targeting the design of the integral sliding surface and equivalent control input. The corresponding control input is selected in order to generate the sliding mode on the predetermined integral sliding surface. As a result, the whole sliding output from a given initial state to origin is completely guaranteed against persistent disturbances. Moreover the prediction/predetermination of output is enabled, which helps in improving the performance over previously implemented VSS's. Through an illustrative example, the usefulness of the algorithm is shown.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.82-91
• /
• 1997

In this paper, a design method of the boiler-turbine control system in the coal fired power plant is proposed. We need to control electric output and drum pressure and water level in drum to guarantee stable operation and save energy for generating electricity and decrease air pollution in the boiler-turbine system. This boiler-turbine control system is composed of reference model part and model following part. The multivariable boiler-turbine system is separated into 3 SISO(Single Input Single Output) systems applying the concept of relative gain matrix. Each 3 reference models for separated boiler-turbine system are composed of 1st order nominal plant and hysteresis integral control system and they make good dy¬namic response with no overshoot and fast rising time. Each fuzzy controller to follow as close as possible to the response of each reference model is designed. The robustness and the good tracking property can be achieved using 5150 fuzzy controllers when there are modeling errors, disturbances and parameter pertur¬bations. The effectiveness of the proposed design method is verified through simulations.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.250-258
• /
• 1999

This paper presents a decentralized adaptive controller design for a Magnetically Levitated Fine Manipulator to follow the given trajectory as close as possible in spite of coupling effects between motion axes(degree of freedoms or subsystems). The present controller consists of two parts: the model reference controls based on known subsystems and the local adaptive controls. The former stabilizes the motion of the manipulator so as to follow that of the reference model. The latter reduces tracking errors due to coupling disturbances by adjusting the local gains to such levels that override interactions and assure the stability of the overall system. Through several experimental results, it has been shown that the decentralized adaptive control scheme has better tracking performances comparing to the PID controller case as well as good disturbance(coupling) rejection property.