• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.569-577
• /
• 2015

The aim of this study is to qualitatively evaluate the cracking control effects of expansive concrete used in reinforced concrete building. The result of experiments in laboratory shows that autogenous shrinkage and drying shrinkage are suppressed by using expansive additive. The tensile stress-strength ratio is lower in expansive concrete than normal concrete under fully restrained condition. Compression stress could be effectively generated in early age in the walls in buildings by the use of expansive additive, and tensile stress due to drying shrinkage at later age eventually decreased. Additionally, visual observation at long-term ages shows that the cracking area of expansive concrete was approximately 35% of normal concrete, which confirms that the use of expansive additive reduces concrete cracking in reinforced concrete buildings.

• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.131-137
• /
• 1997

This study was carried out to investigate the in vivo development rates of vitrified-thawed mouse expanding, hatching and hatched blastoc ysts(BL). In vitro fertilization produced blastocysts were vitrified in EFS40(40% ethylene glycol, 30% Ficoll and 0.3 M sucrose in phosphate buffer saline containing 10% FBS). Expanding a and hatching blastocysts were equilibrated in 20% ethylene glyco](EG) for 5 min. before exposure to EFS40 at 25°C for 1 min., they were then vitrified in liquid nitrogen. Hatched blastocysts which cultured in m-CR1 medium supple mented 0.4% bovine serum albumin on day 5. were equilibrated in 10% EG for 5 min. and then vitrified in EFS40 for 30 sec. After thawing, re-expanding blastocysts were transferred to recipients(3 day of pseudopregnant) on one or both uterine horns(6-8 embryos per a horn). Preg¬n nancy rates of recipients and implantation were a assccessed by autopsy on 15 gestation. The res¬u ults obtained in these experiments were summar¬1 ized as follows; 1) The pregnancy and live fetus rates, for vitrified expanding BL(77.8 and 25.0%) and hatching BL(77.8 and 26.4%)n vitro were not significantly difference in those of control BL (66.7 and 42.9%: 83.3 and 40.4%), respectively, 2) in vitro development of vitrified hatched BL was 34.0%. and 3) in vivo developmental rate of vitrified hatched BL was only 33.3%. These results suggested that proposed rapid vitrification p procedures used EFS40 cryoprotectant can be effectively performed in mouse expanding Ihatching blastocysts and that mouse blastocysts a after being hatched from zona pellucida can be successfully cryopreserved.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.231-238
• /
• 1999

The objective of this study was to examine the effect of developmental stage and embryo age of in vitro produced bovine blastocysts after vitrification and thawing. In vitro cultured day 8 blastocysts after IVF were equilibrated 20% ethylene glycol (EG) for 3 min. and were vitrified using EFS40, which is consisted of 40% EG, 18% ficoll, 0.3M sucrose and 10% FBS added in mDPBS for 30 sec. before being plunged into $LN_2$. Also, survival in vitro was assessed by re-expansion and hatching or hatched at 24 hand 48 h postwarming, respectively. The results obtained in these experiments were summarized as follows; 1) When the embryos were cultured for 8 day after IVF, 41.0% of the cleaved embryos developed to the blastocysts (early; 7.6%, expanded; 22.9%, hatching; 4.6% and hatched; 5.9%). 2) When the embryos were exposed or vitrified to the freezing solution, the re-expansion of vitrified embryos (73.3%) was significantly lower than that of control and exposed embryos (100, 97.0%) (p<0.05). But the formation rate of hatching or hatched blastocysts of vitrified embryos (66.7, 46.7%) at 48h after thawing was similar to that of exposed embryos (66.7, 39.4%) but not control (100, 100%) (p<0.01). However, in the total cell numbers of those developed hatched blastocysts, there were not significantly different among the treatment groups. 3) When the embryo survival rates by different developmental stage were examined, the re-expansion was not different among the groups $(64.5{\sim}75.6%)$. After warming 48 h, the hatching and hatched formation of early blastocysts (25.8, 9.7%) was significantly lower than those of expanded (69.7, 39.4%) and hatching blastocysts (53.3, 43.3%) (p<0.05). 4) In addition, when the expanded blastocysts at day 7, 8 and 9 were vitrified, the re-expansion of day 8 and 9 embryos was significantly lower than that of day 7 (day 7; 93.9%, day 8; 75.8% and day 9; 87.5%) (p<0.05). However, the rates of development to hatched blastocysts were no difference among the groups (day 7; 36.4%, day 8; 36.4% and day 9; 31.3%). These results suggested that in vitro produced expanded or hatching blastocysts can be efficiently cryopreserved by the two-step vitrification method using EFS40.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.519-526
• /
• 2000

강수량 변동에 따른 사면 내의 지하수유동과 사면의 안정성 변화를 동시에 분석.평가하기 위하여 하나의 완전 연동된 수리지질역학적 모델을 제시하였다. 이 모델은 변형성 지질매체 내에서의 지하수유동을 설명하는 일련의 지배식들과 Galerkin 유한요소법에 기초하여 개발되었다. 1990년부터 1999년까지의 서울지역의 건기 (1월) 및 우기 (8월) 강수량 하에 있는 토양 사면에 대해 개발된 모델을 적용하여 일련의 수치실험을 실시하였다. 수치실험의 결과는 강수량이 증가함에 따라 사면의 수리역학적 안정성이 전반적으로 악화됨을 보여준다. 즉 강수량이 증가할수록 공극수압이 증가하고 지하수면이 상승한다. 그 결과 불포화대가 축소되고 삼출면이 팽창되며 사면의 전단부를 따라 지하수유동속도가 증가하게 된다. 동시에 강수량이 증가할수록 사면 전단부를 향해 전반적인 변위량이 증가한다. 그 결과 안전율이 1 이하인 불안전한 지역이 사면 전단부에서 사면 상부 쪽으로 전파.팽창되며 그 두께도 증가한다. 수치실험의 결과는 또한 사면의 표면에서는 전단파괴와 더불어 인장파괴도 발생할 수 있음을 보여준다.

• Korean Journal of Rural Living Science
• /
• v.4 no.1
• /
• pp.13-22
• /
• 1993

증편 제조조건의 표준화 방법설정을 위하여 다섯가지(발효원, 가수량, 발효온도, 발효시간, 팽창제) 발효조건을 완전임의 배치법으로 시험, 유의성 검정을 하였으며, 증편의 팽화도 측정 및 팽화된 증편의 생장(증편의 부푼모양, 스폰지감의 생성여부, 기공의 균일성)에 대한 관능검사를 실시하여 다음과 같은 결론을 얻었다. 1. 팽화도에 영향을 미치는 요인으로는 발효원, 가수량, 발효온도, 발효시간 둥이었으며 Yeast 1% 보다는 탁주 또는 Yeast 2%를 사용하는 것이 그리고 3$0^{\circ}C$ 보다는 4$0^{\circ}C$에서 발효시키는 편이 발효시간의 단축효과가 있는 것 같았다. 2. 증편의 팽화가 가장 잘 이루어질 수 있는 발효조건으로는 발효원으로서 탁주를 사용하며 가수량을 75%로 하여 4$0^{\circ}C$에서 4시간 발효시킨 후 성형하여 제조하는 것이었다. 3. 증편 성장에 대한 기호도에 영향을 미치는 발효조건으로는 가수량, 발효온도, 발효시간, 팽창제 둥이었으며 가수량에 관계없이 팽창제를 첨가하여 제조하는 것이 좋고 가수량이 낮을수록 발효시간을 길게하는 편이 나을듯 하다. 4. 증편 성장에 대한 기호도가 가장 높은 증편 제조조건으로는 발효원을 Yeast 1%를 사용하고 반죽의 팽창을 돕기 위해 베이킹파우더 1%를 첨가하며 4$0^{\circ}C$에서 4시간 발효시킨 후 성형하여 찌는 것이었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.41-47
• /
• 2011

Turbopump, which is a part of 75 ton open cycle liquid rocket engine has a super sonic impulse turbine. This paper investigated the leading edge thickness effect on the turbine performance experimently. Two rotors were tested with the different leading edge thickness. The ratios (rotor thickness to Pitch) are 1.9 and 1.4 times to 30 ton turbine rotor. As a result, a rotor with 1.4 times ratio had a 1.5% higher efficiency gain than a rotor with 1.9 times ratio. The pressure ratio with the maximum efficiency on the same rotational speed was increased to the full expansion ratio of nozzle.

• Journal of Chest Surgery
• /
• v.37 no.1
• /
• pp.108-111
• /
• 2004

Reoperation on the recurrent aortic aneurysm adjuvent to sternum remains a challenging problem in regard to the risk of the massive hemorrhage at the time of resternotomy resulting from inadvertent entry into the aneurysmal sac. The cardiopulmonary bypass technique of femoral cannulation and deep hypothermic circulatory arrest can provide a safe resternotomy. The left ventricle is likely to distend due to lack of contraction with ventricular fibrillation during core cooling. To prevent ventricular distention during core cooling, sufficient venous drainage is mandatory, We report a technique in which deep hypothermic circulatory arrest is achieved before resternotomy without left ventricular distention by active venous drainage using centrifugal pump.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.160-167
• /
• 2007

This paper proposes a model for the solutions predicting the coefficient of thermal expansion of composites including fiber-like shaped$(a_1>a_2=a_3)$ and disk-like shaped$(a_1=a_2>a_3)$ inclusions like two dimensional geometries, which was analyzed by one axis and a single aspect ratio, $(\rho_\alpha=a_1/a_3)$. The analysis follows the procedure developed for elastic moduli by using the Lee and Paul's approach. The effects of the aspect ratio on the coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The longitudinal coefficients of thermal expansion $\alpha_{11}$ decrease and approach the coefficient of thermal expansion of filler, as the aspect ratios increase. However, the transverse coefficients of thermal expansion $\alpha_{33}$ increase or decrease with the aspect ratios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.24-31
• /
• 2002

The effects of vortex generators, in the form of small delta-shaped tabs or thin tapes at an axi-symmetric supersonic nozzle exit, on the characteristics of supersonic jet flowfields are investigated by Schlieren images and Pitot-tube measurements. Small tabs as small as 1 % of the nozzle exit area can introduce streamwise vortices and produce a significant effect on the jet flowfield downstream of the nozzle. The effect is stronger for the cases of under-expanded jet than over- and perfect-expanded cases, introducing a larger flow entrainment. The effects of the angle of tabs with respect to the flow direction are also investigated, and for over-expanded jet cases, it is found that the tabs bended toward upstream can weaken the interaction strength and remove the Mach disc in the jet flowfield. Introduction of small proturbances inside the nozzle surface by attachment of thin tapes is also found to change the pressure distribution in the circumferential direction of the flowfield. Its effect is also found to be dependent on the jet expansion ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2004

A flywheel-driven rapid compression and expansion machine is developed and utilized for experimental study of homogeneous charge compression ignition combustion. Compression ignition of homogeneous charge in IC engines offers possibilities of realizing ultra-lean engine operation with greatly reduced NOx and particulate formation. Fundamental investigations are carried out in order to better understand this ideal engine combustion mechanism. Perfectly premixed propane-air mixtures of various equivalence ratio are compression-ignited in the rapid compression and expansion machine, and the characteristics of the auto-ignition and the following combustion process are analyzed.