• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.344-355
• /
• 2023

In complete denture fabrication, accurate preliminary impressions are crucial for obtaining an accurate final impression. However, it can be challenging in cases of atypical arch shapes. This case report compares diagnostic casts made with a stock tray and an intraoral scanner (IOS) in a patient with an atypical arch shape. A 58-year-old edentulous male patient with long, narrow, atypical arches was referred to the Oral and Maxillofacial Surgery department for complete denture fabrication. Compared to the diagnostic cast obtained using IOS with adequately captured anatomical parameters, the primary model obtained using a stock tray showed prominent overextended flanges on the labial and buccal sides of the maxillary arch and less prominent overextended flanges in the mandibular arch with pressure spots in the posterior palatal seal area. The custom tray fabricated from such a model required additional adjustment resulting in increased chair time during the final impression procedure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.123-130
• /
• 2024

There are various methods for restoring the dentition of completely edentulous patients. Removable complete dentures have the advantage of being relatively economical, but they can be uncomfortable to wear. With the introduction of implant prosthodontics, various options such as implant-supported overdentures and hybrid prostheses have become available. If there is inadequate remaining ridge or limited financial resources, an overdenture supported by a few implants with additional attachments may be more suitable. In this case, due to severe peri-implantitis and other complications, the implants were removed. Subsequently, four implants (two on each side) were placed in the maxilla and a milled-bar with attachment was fabricated for each side of the maxilla.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.321-328
• /
• 2017

Treatment options for edentulous patients are complete denture and implant prosthesis. A two implant-retained overdenture can be considered the first treatment in the edentulous mandible, but there is no clear consensus of treatment for edentulous maxilla. Implant-retention/support overdenture shows better retention and stability than complete denture and is less expensive and more esthetic than implant-supported fixed prosthesis. CM $LOC^{(R)}$ $Pekkton^{(R)}$ attachment is a solitary type attachment and evaluated to have excellent abrasion resistance and retention with a female part made of poly-ether-ketone-ketone. Meanwhile, SR Ivocap system is injection molding method and discussed to show few changes in the vertical dimension of denture and have excellent fracture resistance. In this case, we restored maxillary arch with a four implant-retained overdenture using CM $LOC^{(R)}$ $Pekkton^{(R)}$ and SR Ivocap system, and mandibular arch with a removable partial denture. Through this procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.193-201
• /
• 2008

In edentulous mandible, implant supported overdenture was considered as a first treatment option. In case of a implant supported telescopic overdenture, sufficient inter-arch space needs for arrangement of artificial teeth and attachment. Passive fit of the implant prosthesis is important factor for preventing mechanical failure. Gold Electroforming System is particularly useful to achieve a passive fit of telescopic attachment and results in precision marginal fit and the small thickness of the coping provides optimal space for narrow inter-arch space. This article presents that application of Gold Electroforming System can provide excellent esthetics and function on four-implant supported telescopic overdenture.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.196-202
• /
• 2020

Recently three-dimensional (3D) printed complete dentures are becoming more widely recognized as one of the treatment options for the edentulous patients. Korean National Healthcare, however, has not yet approved the application of the 3D printed dentures, and in the cases where the dentures should be refabricated, the conventional fabrication process needs to be entirely repeated. However, during the conventional process, the digital scan data of some key steps could be easily obtained. In this clinical case, using these data, a new pair of 3D printed dentures that improved the limitations of the first conventional dentures were successfully fabricated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.24-24
• /
• 2015

최근 생체재료의 개발이 눈부시게 발전되고 생체적합성이 우수한 표면을 요구함에 따라 생체재료의 표면처리에 대한 연구가 활발히 진행되고 있다. Laser Deposition법은 항공기 부품제조 분야에 주로 사용되고 있으며 최근에 오하이오 주립대 타이타늄합금연구센터를 중심으로 표면처리에 관한 연구가 주로 이루어졌다. 특히 이를 이용하여 치과재료의 표면처리에 응용을 시도하였다. 치과에서 응용될 수 있는 경우는 주로 임플란트는 부분 또는 완전 무치악 환자의 보철수복에 사용되는 보철물의 제작등에 사용될 수 있으며 이중에서도 특히 생체용 임플란트의 표면처리응용으로 임플란트와 조직간의 접합성을 개선하는 표면처리법으로 연구되었다. 임플란트의 성공과 실패는 물성적인 측면에서 임플란트의 형태, 표면거칠기 및 표면처리방법, 초기하중 등에 의하여 좌우되며 임플란트 재료에 작용하는 응력차폐는 생체적합성을 좌우하는 큰 요인이 되고 있다. 이를 위하여 저 탄성계수합금을 설계하지만 하중을 버티는 강도가 낮아지는 단점이 있어 레이저증착법을 이용하여 임플란트재료인 Ti6Al4V합금에 탄성계수가 낮은 Ta, Nb등을 코팅하는 방법을 통하여 이를 해결하고자하는 시도가 이루어지고 있다. 이 방법은 최근의 3D 프린팅의 원리가 되고 있다. 따라서 발표에서는 Laser Deposition방법을 이용하여 치의학분야에서 응용되고 있는 예를 강연하고 응용 가능 분야에 대하여 토론 하고자한다. 또한 펨토레이저를 이용하여 생체합금의 표면처리는 생체활성화를 더욱 증진시키며 이를 위하여 많은 연구 수행되고 있다. 본 발표에서는 매식용 합금 표면에 펨토레이저를 이용하여 텍스춰링하여 세포가 잘 성장 할 수 있는 크기의 조절함으로써 기존의 표면처리와는 다른 효과를 얻을 수 있는 장점을 알아본다. 펨토레이저를 이용하면 여러 가지 형태의 텍스춰링이 가능하며 원형, 사각형등등 자유자제로 형태의 묘사가 가능하고 깊이 또한 쉽게 조절할 수 있는 장점이 있다. 지금까지는 표면 개질에 사용되는 레이저는 주로 Nd:YAG 레이저의 파장을 반으로 줄인 녹색레이저 (${\lambda}=532nm$)를 사용하거나, 자외선파장영역의 레이저를 사용하는 경우가 일반적으로 가장 보편화되었다. 이를 이용하여 제조된 Ti합금에 펨토 초(10-15 second) 펄스폭 대역을 갖는 레이저를 이용하여 나노크기의 미세 요철을 표면에 형성한 후, 나노튜브를 형성하여 그 표면특성의 변화를 알아보고 펨토레이저가 의료분야에 적용되고 있는 예를 살펴보고자 한다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.316-327
• /
• 2023

In the case of fully edentulous patients with severe alveolar bone resorption, the consideration of 'All-on-X' implant-supported fixed prosthesis after placing four or more implants in the anterior maxilla is possible. Recent advancements in digital dentistry have enabled systematic and predictable treatment in all phases, including diagnosis, surgery, and prosthesis fabrication. By incorporating digital dentistry techniques such as digital complete denture, implant surgical guides, facial scanning into the conventional restoration process, it is possible to reduce the complexity of the prosthesis fabrication and effectively achieve the transition from provisional prosthesis to definitive prosthesis in terms of both aesthetics and function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.278-288
• /
• 2014

Purpose: The aim of the study was to evaluate preprosthetic initial survival rate and factors associated with survival of osseointegrated implants placed in edentulous area of maxilla and mandible and to suspect the possible causes leading to failure. Materials and Methods: A total of 2158 endosseous implants that had been inserted between 2004 through 2013 were placed in 770 patients. The clinical comparisons were performed to evaluate implant loss in relation to age and gender of patients, position, system, length and diameter of implant, and bone graft technique. Results: According to position, the survival rates were 98.23% in maxillary anterior site, 96.98% in maxillary posterior site, 97.85% in mandibular anterior site and 98.76% in mandibular posterior site (P < 0.05). According to diameter of implant, the survival rates were 100% under 3.0 mm, 97.09% between 3.0 to 3.5 mm, 98.19% between 3.5 to 4.0 mm and 98.29% between 4.0 to 4.5 mm but relatively lower survival rate was 75% in 5.0 mm-over (P < 0.05). The survival rates of implants were 89.51%, 98.28%, 98.34% and 99.27% in the group with isolated sinus graft, with isolated GBR, with sinus graft and GBR simultaneously and without bone graft, especially (P < 0.05). Conclusion: This study establishes a relationship between survival rate of implant and position, diameter of implant system and bone graft technique. In conclusion, there were low survival rates in maxillary posterior site, in dental implants with wide diameter of 5 mm-over, and in the group with isolated sinus graft.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.253-268
• /
• 2012

Full-mouth reconstruction of a patient using dental implants is a challenge if there is vertical and horizontal bone resorption, since this includes the gingival area and restricts the position of the implants. however, hard- and soft-tissue grafting may allow the implants to be placed into the desired position. Although it is possible to regenerate lost tissues, an alternative is to use fixed detachable prostheses that restore the function and the esthetics of the gingiva and teeth. Various material combinations including metal/acrylic, metal/ceramic, and zirconia/ceramic have been used for constructing this type of restoration. Other problems include wear, separation or fracture of the resin teeth from the metal/acrylic prosthesis, chipping or fracture of porcelain from the metal/ceramic or zirconia/ceramic prosthesis, and fracture of the framework in some free-end prostheses. With virtually unbreakable, chip-proof, life-like nature, monolithic zirconia frameworks can prospectively replace other framework materials. This clinical report describes the restoration of a patient with complete fixed detachable maxillary and mandibular prostheses made of monolithic zirconia with dental implants. The occluding surfaces were made of monolithic zirconia, to decrease the risk of chipping or fracture. The prostheses were esthetically pleasing, and no clinical complications have been reported after two years.