• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1765-1775
• /
• 2013

The application of FRP wire as a mean of improving strength and ductility capacity of concrete cylinders under axial compressive load through confinement is investigated experimentally in this study. An experimental investigation involves axial compressive test of three confining amounts of FRP wire and three concrete compressive strengths. The effectiveness of FRP wire confinement on the concrete microstructure were examined by evaluating the internal concrete damage using axial, circumferential, and volumetric strains. The axial stress-strain relations of FRP wire confined concrete showed bilinear behavior with transition region. It showed strain-hardening behavior in the post-cracking region. The load carrying capacity was linearly increased with increasing of the amount of FRP wire. The ultimate strength of the 35 MPa specimen confined with 3 layer of FRP wire was increased by 286% compared to control one. When the concrete were effectively confined with FRP wire, horizontal cracks were formed by shearing. It was developed from sudden expansion of the concrete due to confinement ruptures at one side while the FRP wire was still working in hindering expansion of concrete at the other side of the crack. The FRP wire failure strains obtained from FRP wire confined concrete tests were 55~90%, average 69.5%, of the FRP wire ultimate uniaxial tensile strain. It was as high as any other FRP confined method. The magnitude of FRP wire failure strain was related to the FRP wire effectiveness.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.343-350
• /
• 2009

In the present study, a new seismic retrofitting method that employs both a stainless steel wire mesh and a permeable polymer concrete mortar was proposed for reinforced concrete bridge piers with nonseismic design details. For this purpose, a total of six nonseismically designed bridge piers were tested under lateral load reversals. The test results reveal that nonseismically designed piers with lap splices need to be retrofitted to resist earthquake induced forces. In addition, it was proven that the proposed retrofitting method can be useful in improving the strength, stiffness, and energy dissipation capacities of bridge piers designed nonseismically. It is thus expected that the proposed method may provide an improved ductility capacity without sudden softening of strength for bridge piers excursing inelastic displacement range.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.404-404
• /
• 2018

본 연구는 홍수조절을 위한 댐의 역할과 홍수조절의 크기가 하류에 미치는 영향범위에 대해 조사하였다. 연구지역으로 낙동강을 중심으로 연구를 진행하였고 기존연구(남한강 유역)와의 비교를 통해 댐의 홍수조절 능력의 공간적 영향 범위에 대한 분석을 실시하였다. 낙동강 유역과 남한강 유역의 홍수사상은 각각 1997년부터 2010년까지의 31개의 홍수사상과 2000년부터 2010년까지의 18개의 홍수사상을 활용하였다. 남한강 유역은 횡성댐(2000년 완공)의 영향을 포함하여 분석하기 위해 2000년부터의 홍수사상을 선정하였다. 낙동강 유역은 안동댐과 임하댐의 영향을 남한강 유역은 충주댐과 횡성댐의 영향을 분석하였다. 홍수조절의 양을 분석하기 위해 홍수최대 유출치 (Peak Discharge)와 홍수유출량(Volume)을 분석하였다. 댐 자체의 홍수조절 능력을 보면 댐의 상시방류량을 넘어 조절하는 하는 경우는 남한강 댐의 경우는 종종 발생하나 낙동강내의 댐의 경우는 자주 발생하지 않는 것으로 파악됐다. 댐의 홍수조절 능력의 경우 댐의 크기와 유역의 크기를 비교분석하여 댐이 영향이 미치는 범위를 추정하였다. 댐의 영향(홍수저감율)이 10 %미만으로 조정되는 거리는 한강유역의 경우는 댐 상류의 면적의 7배에 해당하는 유역이었으나 낙동강 유역의 경우는 8.5배에 해당하는 유역면적에서 같은 영향을 나타냈다. 이는 자료의 양과 조건의 영향으로 파악된다.

• Resources Recycling
• /
• v.24 no.3
• /
• pp.66-75
• /
• 2015

The flexural performance of amorphous steel fibers having environmental and economy benefits due to relatively short manufacturing process were evaluated as well as that of hooked steel fibers by varing fiber length and volume fraction. Fiber lengths were 10 mm, 20 mm, 30 mm and fiber volume fractions were varied from 0.3% to 1.2%. Test results with flexural performance showed that mixing design needs to be careful because of relatively high volume of amorphous steel fiber compared to hooked steel fibers. High flexural strength was obtained from both longer fiber length and higher volume fraction. Residual strength and toughness of amorphous steel fiber were similar to that of hooked steel fiber, even though rapid dropping of applied load right after concrete matrix breaking. It can be judged that relatively high ability of energy dissipation around first cracking area relatively overcome rapid dropping of loading.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.373-383
• /
• 1987

No-fines concrete is concrete from which the fine aggregate fraction has been omitted. The concrete so formed, consisting only of coarse aggregate, cement, and water, has large voids uniformly distributed through its mass. This study was performed to obtain the basic data which can be applied to the use of no-fines concrete. The data was based on the properties of no-fines concrete depending upon various mixing ratios. The results obtained were summarized as follows. 1. Test result of the consistency, suitable water-cement ratio was increased with the increasing of mixing ratio. 2. At the suitable water-cement ratio, the highest strengths were showed. But it gradually was decreased with the increasing of mixing ratio and strengths are considerably lower than that of conventional portland cement concrete. 3. The relations between compressive and tensile strength were highly singnificant as a straight line shaped. The strength ratio was decreased with the increasing of mixing ratio and considerably lower than of conventional portland cement concrete. 4. Bulk density was decreased with the increasing of the mixing ratio, and was similar to that of the conventional portland cement concrete at mixing ratio 1:4. 5. The relations between strength and bulk density were highly significant as a straight line shaped. The decreasing ratio of strengths was higher than that of bulk density.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.333-344
• /
• 1995

Cu를 함유한 2종의 저합금 고장력강(HSLA-A, HSLA-B)\ulcorner 기계적 성질에 미치는 시효처리의 영향을 조사하였다. 탄소량이 적음에도 불구하고 Cu첨가로 석출물을 생성시킴으로서 2합금 모두 $650^{\circ}C$에서 시효한 경우 양호한 강도(HSLA-A:Y.S 703Mpa, E.L 22.6% HSLA-B:Y.S 810 Mpa, E.L 23.8%)와 인성(HSLA-A:271.4J, HSLA-B:197.5J at -5$0^{\circ}C$)의 조합을 나타내었다. 50$0^{\circ}C$에서 시효할 때 가장 높은 항복 강도를 나타내나 인성은 아주 낮은 값을 나타내었다. 50$0^{\circ}C$이상 시효 온도가 증가하면 강도는 감소하고 인성은 증가하였다. HSLA-B강의 강도가 HSLA-A 강보다 높은데, \ulcorner칭 상태에서의 강도 차이는 경화능을 증가시키는 원소인 Ni, Mn, Mo, Cu의 첨가량 차이에 의한 기지 조직의 차이에 의한 것이며, 시효한 상태에서의 강도 차이는 기지 조직과 석출 강화에 기여하는 Cu량의 차이에 의한 것으로 판단된다. 시효 경화 곡선에서 $700^{\circ}C$에서의 경도 증가는 오스테나이트-페라이트 2상 영역으로부터 냉각시 생성된 “M-A constituents”에 의한 것이다. HSLA-A강과 HSLA-B강의 충격 천이 온도는 각각 -1$25^{\circ}C$와 -145$^{\circ}C$이었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1363-1367
• /
• 2007

낙동강 하류지점인 물금은 2003년${\sim}$2005년의 대부분이 부영양화의 기준을 넘고 있다. 본 연구에서는 WASP 모형을 이용하여 낙동강 하류에서 부영양화의 주요원인이 되는 영양물질과 결과적으로 나타나는 Chl-a 농도변화를 모의하였다. Chl-a의 농도모의를 위한 주요 입력자료로서 측정된 동물성 플랑크톤의 개체수가 입력되었다. 선정된 수질조사 지점은 낙동강 본류(왜관, 고령, 적포, 남지, 하남, 낙동강 하구둑)와 지류인 금호강, 회천, 황강, 남강, 밀양강이다. 수질모의 구간은 낙동강 본류(왜관${\sim}$낙동강 하구둑)와 지류인 금호강, 회천, 황강, 남강, 밀양강을 포함한 총 72개의 구간이다. 모형의 모의시간과 출력시간은 각각 1일로 하였다. 2003년의 자료를 이용하여 추정된 수질 매개변수들의 적합성을 확인하기 위해 2004년${\sim}$2005년의 수질자료와 유량자료를 이용하여 검증하였고, 입력된 매개변수와 기상 입력자료(유량, 수온, 일사량, 일조율)의 값을 중심으로 10% 씩 상하로 변화시켰을 때의 민감도를 분석하였다. Chl-a는 민감도분석결과 Chl-a의 성장률과 동물성 플랑크톤의 섭식률에 의해 영향을 많이 받았다. 인은 Chl-a에 영향을 주었지만 질소는 거의 영향이 없었다. 기상자료의 민감도분석결과 유량, 수온, 일조율, 일사량의 순서로 민감하게 모의 되었다. WASP 모형에서 동물성 플랑크톤 개체수의 입력 유 무에 따른 수질모의결과는 동물성 플랑크톤을 입력했을 때가 더 정확히 모의되는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.46-53
• /
• 1994

This study was conducted to investigate a feasibility of manufacturing wood fiber thermoplastic composites and to evaluate their mechanical properties. Wood fiber as a potential reinforcing filler was compounded with two thermoplastics (polypropylene and high density polyethylene) in high intensity thermokinetic plastic mixer aided with a wetting agent. It was found that wood fiber thermoplastic composites could be manufactured by injection molding process. The tensile and flexural strength of injection molded specimens were improved greatly with increasing wood fiber concentration. Tensile and flexural modulus increased proportionately with wood fiber concentration. Wood fiber provided reinforcement with thermoplastics in terms of strength and modulus. However, the percent elongation at break and energy to break were reduced with increasing wood fiber loadings. Impact strength also showed similar trend.

• Korean Journal of Agricultural Science
• /
• v.6 no.1
• /
• pp.45-55
• /
• 1979

This study made to find the variation of strengths of briquette ash which were hardened into cement. The briquette ash were mixed with the cement, ((cement (90%)+slaked lime (10%)) and ((cement (80%)+fly ash (20%)) in the ratio of 1:2, 1:3, 1:4, 1:5, 1:7 and 1:9, respectively, and these were compared with the one made of cement plus standard sand in the strengths of compression, tension and bending at the ages of 7 days and 28 days. The results from the study conducted preliminary without studying the economical aspects or duration of the products are summarized as follows: 1. The compressive strengths of mortar made of 1 to 2 ratios of cement to briquette ash, (cement+slaked lime) to briquette ash and (cement+fly ash) to briquette ash were 84%, 90% and 75% at the age of 7 days and 84.9%, 73.5% and 69.8%, respectively of those of Korean Standard values. 2. The compressive strength s of mortar made of 1 to 2 ratios of cement to briquette ash, (cement+slaked lime) to briquette ash and (cement+fly ash) to briquette ash were 69.3%, 75.1% and 41.3% at the age of 7 days and 56.4%, 49%, and 46.5% at the age of 28 days, respectively of the mortar made of standard sand. 3. The tension strengths of mortar made of 1 to 2 ratios of cement to briquette ash, (cement+slaked lime) to briquette ash, and (cement+fly ash) to briquette ash were 64.4%, 47.1% and 35.4% at the age of 7days and 69.6%, 64.8%, and 57.3%, respectively of that of the mort ar produced with standard sand. 4. The bending strengths of mortar made of 1 to 2 ratios of cement to briquette ash, (cement+slaked lime) to briquette ash, and (cement+fly ash) to briquette ash were 46.3%, 65.9% and 39.1% at the age of 7 days and 89.9%, 96.7%, and 85.1%, respectively of that of mortar produced with standard sand. 5. The bending strength of the mortar was lower than that of cement mortar, when the briquette ash were harqened into cement. However, the mortar produced by such method seemed to be used as the secondary products of cement or concrete. The additional usefullness of the hardened biquette ash can be found in contributing toward the solving the various pollution problems, the saving the labor costs needed to clean-up waste materials, and the saving the construction materials.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.52-62
• /
• 1994

기계나 구조물 파괴의 대부분은 노치부를 기점으로 하여 발생하기 때문에 첨단복합재료를 노지부 재로서 안전하면서도 경제적으로 사용하기 위해서는 각종 조건하에 있어서 강도특성을 명확히 하는 것은 대단히 중요하다. 본 연구에서는 노치를 갖는 복합재료를 이용하여 각종조건하에서 강도특성평가실험을 행하였으 며, 얻어진 결과를 종합하면 다음과 같다. (1) 첨단복합재료 노치재는 試驗片의 幾可學的 形狀과는 관계없이 노치반경 p만에 의해 결정되는 최대탄성응력 $\sigma_{max}$일정의 條件下에서 破t짧된다. (2) 破斷時 최소단면에서의 공칭응력 $\sigma_{c}$와 응력집중계수 $K_{t}$와의 관계에 있어서,$\sigma_{c}$의 값이 $K_{t}$의 증대와 더불어 떨어지고 있는 부분과, $K_{t}$와 관계없이 거의 일정하게 되고 있는 부분으로 나누어지는 現象은 노치재의 回轉굽힘 또는 인장압축파열에서 보여지는 현상과 外觀上 對應하고 있다. 즉, 정적파괴와 피로파괴는 파괴의 양상이 비슷하다 (3) PEN수지단체의 경우, 피로균열발생은 점발생적 피로균열이 최대탄성응력에 의해 지배되며, 노치에 만감하며,균열전파수명은전수명에 비해 상당히 짧다. (4) 단탄소섬유강화복합재료의 경우, 피로균열은 섬유端에 응력이 집중하기 때문에 일반적으로 섬유端에서 아주 빠른 시기에 발생하지만, 섬유가 피로균열진전에 대해 방해물로 작용하기때문에 아주 천천히 전파한다. (5) 短탄소鐵維는 피로균열발생에 대해서는 負의 강화작용 전수명의 극히 초기단계에 피로균열 발생을, 피로균열전파에 대해서는 正의 강화작용을 한다. (6) 단탄소섬유를 PEN에 강화함으로 인해 정적강도 보다 피로강도에 더 큰 강화효과를 초래했으며, 선형노치역학의 개녀은 첨단 복합재료의 강도평가에 대단히 유효했다.