• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.857-860
• /
• 2014

This paper proposes a human movement detection system by a thermopile array sensor. In the system, the sensor is attached to the ceiling and it acquires spatial temperatures, which is called thermal distribution. The system obtains $4{\times}4$ pixels thermal distributions from the sensor. The distributions are analyzed to extract human movement. As the experimental result, the proposed system successfully detected human movements.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.33-39
• /
• 2015

Recently, the event of slope failure has been occurring frequently due to rapid climate changes and broad development of infrastructures, and the research for establishment of monitoring and prevention system has been an attentive issue. The major influence factors of slope failure mechanism can be considered moisture and temperature in soil, and the slope failure can be monitored and predicted through the trend of moisture-temperature change. Therefore, the combined sensing technology for the continuous measurement of moisture-temperature with different soil depths is needed for the slope monitoring system. The various independent sensors for each item (i.e. temperature and moisture respectively) have been developed, however, the research for development of combined sensing system has been hardly carried out. In this study, the high-fidelity sensor combing temperature-moisture measurement by using the minimized current consuming temperature circuit and the microwave emission moisture sensor is developed and applied on the slope failure monitoring system. The feasibility of developed monitoring system is verified by various experimental approaches such as standard performance test, mockup test and long-term field test. As a result, the developed temperature-moisture combined measurement system is verified to be measuring and monitoring the temperature and moisture in soil accurately.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.449-454
• /
• 2004

심각한 환경문제인 적조 피해를 줄이기 위해서 효과적인 모니터링 기술이 절실히 요구되고 있다. 본 연구에서는 초고주파 라디오미터 센서를 이용한 효과적인 적조 모니터링에 대한 가능성을 조사하였다. 초고주파 라디오미터를 이용해 관측되는 밝기 온도의 차이로 적조 해수를 모니터링 할 수 있다는 아이디어에 기반하여 연구를 수행하였다. 본문에서는 이론적인 배경과 가능성 확인을 위한 실험과정, 결과가 서술되어 있다 실제 해양에서의 측정 실험에서 적조지역의 밝기 온도가 청정지역의 밝기 온도보다 높게 측정되었다. 결론으로, 본 연구를 통하여 초고주파 라디오미터를 이용한 적조 모니터링이 가능함을 확인하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.31-36
• /
• 2014

In this paper, we developed an intergrated piezoresistive temperature and humidity sensor using nano-technology, and evaluated the properties. In the measuring range from $20^{\circ}C$ to $80^{\circ}C$, output sensitivity of temperature was about 0.75mV/$1^{\circ}C$. Output sensitivity of humidity was about 1.35mV/10%(RH). Therefore, developed sensor suggests that it is possible applicable to the general residential environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.87-93
• /
• 2013

The selection of the temperature sensor in a cryogenic system depends on the temperature range, shape, and accuracy. An accurate temperature sensor is essential for improving the reliability of an experiment. We have developed a calibration system for cryogenic temperature sensors using a two-stage cryocooler. To reduce the heat load, a thermal shield is installed at the first stage with multiple layer insulation (MLI). We have also developed a sensor holder for calibrating more than 20 sensors simultaneously in order to save time and reduce costs. This system can calibrate sensors at variable temperatures via temperature control using a heater. In this paper, we present the design and fabrication of the temperature sensor calibration system and a representative experimental result.

• Journal of Sensor Science and Technology
• /
• v.4 no.2
• /
• pp.29-36
• /
• 1995

A constant solid state flow velocity/mass sensor has been fabricated and its characteristics were measured according to flow velocity and fluid temperature. Parameters of the sensor circuit were obtained by simulation using finite difference method. Sensitivity was 10mW/(cm/sec) in the range of flow velocity 0-45cm/sec and response time was within two seconds. For the experiment of fluid temperature variation, the sensor output was compensated at the rate of temperature variation $0.1^{\circ}C/min$, however, with the rate of $0.2^{\circ}C/min$ it took two minutes to be compensated. Since it is not quite often to have such a rate of temperature variation of $0.2^{\circ}C/min$ or more, the developed sensor output can be used for most applications to detect small amount of flow-rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.149-151
• /
• 2009

본 논문에서는 이동이 힘들거나 자주 건강관리가 필요한 노약자나 임산부들에게 좀 더 신속하고 빠른 진단 서비스를 제공하기 위해 단말기에서 맥박을 측정하여 Bluetooth를 통하여 모바일 폰에 전송하고 원격에서 모바일 폰을 통해 전송된 맥박파형 데이터를 분석하고자 한다. 팔목에 착용하는 형태의 단말기에는 체온측정을 위한 온도센서, 맥박측정을 위한 Piezo Vibration Sensor, 움직임 체크를 위한 가속도센서와 자이로센서가 장착되어있다. 이 센서들을 이용하여 측정된 데이터들을 모바일 폰의 Wi-Fi를 통해 서버로 전송하여 원격에서 의사가 담당환자를 체크할 수 있도록 하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.195-197
• /
• 2010

체온은 가장 기본적인 진단 정보로써 여러 가지 생리 변화를 반영하는 지표이므로 거의 모든 질환에 대해 반드시 측정하도록 되어있다. 그러므로 체온을 정확하고 빠르게 측정하는 것은 매우 중요하다. 본 논문은 복합형 체온측정 시스템의 개발에 목적이 있다. 즉, 하나의 복합 시스템으로 고막과 이마에서의 체온을 측정하려고 한다. 개발 결과, 이 시스템은 IR 센서를 사용한 비접촉식 방식이며 빠른 응답시간과 $0.2^{\circ}C$의 정밀도를 가지고 있다. 또한 체온 측정을 위한 주변온도 보상을 고려하여 온도 측정의 정확도를 높였다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.371-375
• /
• 2001

We have implemented a sensor head which consists of erbium doped fiber pumped by 1480 nm LD and single fiber Bragg grating for simultaneous measurement of strain and temperature. The measurement precision and speed are improved by using Mach-Zehnder interferometer instead of optical spectrum analyzer (OSA) as a demodulator. The measurement precision of temperature measured by the amplitude variation of output signal is 0.05$^{\circ}C$ and that of strain measured by the phase variation of output signal is 0.1$\mu$strain. The measurement precision of temperature and strain are improved nearly 140 times and 700 times, respectively, compared to those using an OSA with wavelength resolution of 0.97 nm as d demodulator.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.62-67
• /
• 2003

In this Paper, the dynamic temperature sensitivity and mu. temperature measurement errors of oil and air sensor in oil cooler are evaluated to predict design validity of sensors under special oil and atmosphere temperature changes. The temperature tracking of oil sensors for periodic temperature changes is simulated by obtaining thermal response coefficient from experiment. By this method, it is possible to design the optimal sensors with the admitted temperature measurement errors.